FUJI错误代码查询.pdf - 第685页
Code: 120685A3 Display: TY-axis: Encoder parameter error! Used by: QP3,NP2 Cause: Servo amp error. Remedy: Reset the servo amp. ------------------------------ Code: 120685A4 Display: TY-axis: Encoder echo-back error. Use…
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 1206859B
Display: TY-axis: Torque command A/D error!
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 1206859C
Display: TY-axis: Gate array (JL-0409) error!
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 1206859D
Display: TY-axis: System error!
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 1206859E
Display: TY-axis: Servo error!
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 1206859F
Display: TY-axis: Fully closed loop phase A/B disconnected.
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 120685A0
Display: TY-axis: Fully closed loop phase C disconnected.
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 120685A1
Display: TY-axis: Absolute encoder clear and multiturn limit setting error!
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 120685A2
Display: TY-axis: Encoder communication error!
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
第 684 页
Code: 120685A3
Display: TY-axis: Encoder parameter error!
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 120685A4
Display: TY-axis: Encoder echo-back error.
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 120685A5
Display: TY-axis: Multiturn limit disagreement.
Used by: QP3,NP2
Cause:
Remedy: Check that the correct value is entered for the Pn205 servo parameter.
------------------------------
Code: 120685A6
Display: TY-axis: Position deviation overflow error!
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 120685A7
Display: TY-axis: No option error!
Used by: QP3,NP2
Cause:
Remedy: Check that the MECHATROLINK interface unit is correctly attached to the servo amplifier.If
correct installation does not rectify the problem, replace the MECHATROLINK interface unit.
------------------------------
Code: 120685A8
Display: TY-axis: Option time-out error!
Used by: QP3,NP2
Cause:
Remedy: Check that the MECHATROLINK interface unit is correctly attached to the servo amplifier.If
correct installation does not rectify the problem, replace the MECHATROLINK interface unit.
------------------------------
Code: 120685A9
Display: TY-axis: Option WDC error!
Used by: QP3,NP2
Cause:
Remedy: Check that the MECHATROLINK interface unit is correctly attached to the servo amplifier.If
correct installation does not rectify the problem, replace the MECHATROLINK interface unit.
------------------------------
Code: 120685AA
Display: TY-axis: WDT error!
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
第 685 页
Code: 120685AB
Display: TY-axis: Communication error!
Used by: QP3,NP2
Cause:
Remedy: Check that the MECHATROLINK communications cable between the MTU controller and servo
amplifier is connected correctly.
------------------------------
Code: 120685AC
Display: TY-axis: Servo response error!
Used by: QP3,NP2
Cause:
Remedy: Replace the servo amplifier.
------------------------------
Code: 120685AD
Display: TY-axis: Servo back initial access error!
Used by: QP3,NP2
Cause:
Remedy: Replace the servo amplifier.
------------------------------
Code: 120685AE
Display: TY-axis: Servo back WDC error!
Used by: QP3,NP2
Cause:
Remedy: Replace the servo amplifier.
------------------------------
Code: 120685AF
Display: TY-axis: Command uncompleted.
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 120685B0
Display: TY-axis: Power line open phase.
Used by: QP3,NP2
Cause:
Remedy: Check the servo amplifier power cable connection.
------------------------------
Code: 12068600
Display: TZ-axis: Cycle error!
Used by: QP3,NP2
Cause:
Remedy: TZ-axis: Check the servo motor, servo amp and wiring.
------------------------------
Code: 12068601
Display: TY-axis: Cycle error!
Used by: QP3,NP2
Cause:
Remedy: TY-axis: Check the servo motor, servo amp and wiring.
------------------------------
Code: 12068610
Display: Lifter ascent error!
第 686 页