FUJI错误代码查询.pdf - 第1150页
This error only occurs when the machine is operated with 12 sixteen-inch pallets. ------------------------------ Code: 15040637 Display: RCV2 PLT NOT EXIST Loader error: 15040637 Used by: QP132 Cause: The pallet that pas…
Cause: The return-conveyor's stopper is not engaging.
Remedy: Check operation using I/O commands (XO4C: RCV STPR ON) and adjust if necessary.
------------------------------
Code: 15040631
Display: RCV_STOPPER DOWN TUP
Loader error: 15040631
Used by: QP132
Cause: The return-conveyor's stopper is not disengaging.
Remedy: Check operation using I/O commands (XO4D: RCV STPR OFF) and adjust if necessary.
------------------------------
Code: 15040632
Display: RCV PLT NOT ARRV
Loader error: 15040632
Used by: QP132
Cause: An unloaded pallet has not arrived at the deceleration point.
Remedy: Check that the pallet is not somewhere other than the stopping position on the return-conveyor.
Check operation using I/O commands (X048: RCV DECEL PNT) and adjust if necessary.
------------------------------
Code: 15040633
Display: RCV PLT NOT EXIST
Loader error: 15040633
Used by: QP132
Cause: The pallet that passed through the return-conveyor's deceleration point has not arrived at the
pallet arrival check sensor.
Remedy: Check that the pallet is not somewhere in between the deceleration point and the arrival
verification position on the return-conveyor. Check operation using I/O commands (X049: RCV ARRV
CHK) and adjust if necessary.
------------------------------
Code: 15040634
Display: RCV_STOPPER2 RIZE TUP
Loader error: 15040634
Used by: QP132
Cause: The return-conveyor's stopper2 is not engaging.
Remedy: Check operation using I/O commands (XO6E: RCV STPR2 ON) and adjust if necessary.
This error only occurs when the machine is operated with 12 sixteen-inch pallets.
------------------------------
Code: 15040635
Display: RCV_STOPPER2 DOWN TUP
Loader error: 15040635
Used by: QP132
Cause: The return-conveyor's stopper2 is not disengaging.
Remedy: Check operation using I/O commands (XO77: RCV STPR2 OFF) and adjust if necessary.
This error only occurs when the machine is operated with 12 sixteen-inch pallets.
------------------------------
Code: 15040636
Display: RCV2 PLT NOT ARRV
Loader error: 15040636
Used by: QP132
Cause: An unloaded pallet has not arrived at the deceleration point2.
Remedy: Check that the pallet is not somewhere other than the stopping position on the return-conveyor.
Check operation using I/O commands (X065: RCV DECEL PNT2) and adjust if necessary.
第 1149 页
This error only occurs when the machine is operated with 12 sixteen-inch pallets.
------------------------------
Code: 15040637
Display: RCV2 PLT NOT EXIST
Loader error: 15040637
Used by: QP132
Cause: The pallet that passed through the return-conveyor's deceleration point2 has not arrived at the
pallet arrival check sensor.
Remedy: Check that the pallet is not somewhere in between the deceleration point2 and the arrival
verification position on the return-conveyor. Check operation using I/O commands (X069: RCV ARRV2
CHK) and adjust if necessary.
This error only occurs when the machine is operated with 12 sixteen-inch pallets.
------------------------------
Code: 15040754
Display: LD PCB CLAMP TUP
Loader error: 15040754
Used by: QP132
Cause: The loaded pallet closed check (X045: P.IN PLT CLS) did not come on in the given time .
Remedy: Check operation using I/O commands and adjust if necessary.
------------------------------
Code: 15040755
Display: LD PCB UNCLAMP TUP
Loader error: 15040755
Used by: QP132
Cause: The unloaded pallet open check (X044: P.IN PLT OPN) did not come on in the given time .
Remedy: Check operation using I/O commands and adjust if necessary.
------------------------------
Code: 15040760
Display: LD BACKWARD TUP
Loader error: 15040760
Used by: QP132
Cause: The pallet load cylinder retract sensor (X043: P.IN BWEND) did not come on in the given time
(QP-132).
Remedy: Check operation using I/O commands and adjust if necessary.
------------------------------
Code: 15040761
Display: LD FORWARD TUP
Loader error: 15040761
Used by: QP132
Cause: The pallet load cylinder extend sensor (X042: P.IN FWEND) did not come on in the given time
(QP132).
Remedy: Check operation using I/O commands and adjust if necessary.
------------------------------
Code: 15040762
Display: LD PLT CLAMP TUP
Loader error: 15040762
Used by: QP132
Cause: The loaded pallet unclamp check sensor (X053: P.IN PLT UCLP) did not turn off in the given
time(QP-132).
Remedy: Check operation using I/O commands and adjust if necessary.
------------------------------
第 1150 页
Code: 15040763
Display: LD PLT UNCLAMP TUP
Loader error: 15040763
Used by: QP132
Cause: The pallet unclamp check sensor (X053: P.IN PLT UCLP) did not turn off in the given time(QP-
132).
Remedy: Check operation using I/O commands and adjust if necessary.
------------------------------
Code: 15040764
Display: "P_IN_STPR_OFF_AS_TUP", "LD_ERR 15040764"
Used by:
Cause: The IN pallet stopper OFF check sensor (X050:P.IN STPR OFF) did not turn on within the
specified time.
Remedy: Use I/O commands to make sure that the sensor is functioning normally, and adjust it if
necessary.
------------------------------
Code: 15040765
Display: "P_IN_STPR_ON_AS_TUP", "LD_ERR 15040765"
Used by:
Cause: The IN pallet stopper ON check sensor (X04F:P.IN STPR ON) did not turn on within the specified
time.
Remedy: Use I/O commands to make sure that the sensor is functioning normally, and adjust it if
necessary.
------------------------------
Code: 15040766
Display: LD MANI HOOK OPEN TUP
Loader error: 15040766
Used by: QP132
Cause: The open and close operation of the manipulator hook on the loading side was not completed
within the set amount of time.
Remedy: Check the open and close operation of the loading side manipulator hook and the operation of
the open/close check sensors.
------------------------------
Code: 15040767
Display: LD MANI HOOK CLOSE TUP
Loader error: 15040767
Used by: QP132
Cause: The in-conveyor manipulator's claw did not close in the given time.
Remedy: Check the PCB loader's claw (X05C: PCB LD HOOK CL) operation using I/O commands and
adjust if necessary.
------------------------------
Code: 15040768
Display: LD MANI RIZE TUP
Loader error: 15040768
Used by: QP132
Cause: The ascend and descend operation of the manipulator on the loading side was not completed
within the set amount of time.
Remedy: Check the ascend/descend operation of the manipulator on the loading side and the operation of
the entry board transport upper-limit and lower-limit sensors.
------------------------------
Code: 15040769
第 1151 页