FUJI错误代码查询.pdf - 第1750页
------------------------------ Code: 1D42C6?? Display: Same as code. Used by: Cause: The right edge of the part's body could not be found. Remedy: Check the part's shape and supply direction. Check the Part dat…
Code: 1D42B6??
Display: Same as code.
Used by:
Cause: A lead that should not exist has been found on the upper side. (The last two digits of the code
indicate the lead number.)
Remedy: Check the part's shape and supply direction. Check the Part data and the Device data.
------------------------------
Code: 1D42B7??
Display: Same as code.
Used by:
Cause: A lead that should exist has not been found on the upper side. (The last two digits of the code
indicate the lead number.)
Remedy: Check the part's shape and supply direction. Check the Part data and the Device data.
------------------------------
Code: 1D42C0??
Display: Same as code.
Used by:
Cause: No leads could be found on the left side.
Remedy: Check the part's shape and supply direction. Check the Part data and the Device data.
------------------------------
Code: 1D42C1??
Display: Same as code.
Used by:
Cause: No leads could be found on the lower side.
Remedy: Check the part's shape and supply direction. Check the Part data and the Device data.
------------------------------
Code: 1D42C2??
Display: Same as code.
Used by:
Cause: No leads could be found on the right side.
Remedy: Check the part's shape and supply direction. Check the Part data and the Device data.
------------------------------
Code: 1D42C3??
Display: Same as code.
Used by:
Cause: No leads could be found on the upper side.
Remedy: Check the part's shape and supply direction. Check the Part data and the Device data.
------------------------------
Code: 1D42C4??
Display: Same as code.
Used by:
Cause: The left edge of the part's body could not be found.
Remedy: Check the part's shape and supply direction. Check the Part data and the Device data. Check
the image acquisition conditions.
------------------------------
Code: 1D42C5??
Display: Same as code.
Used by:
Cause: The lower edge of the part's body could not be found.
Remedy: Check the part's shape and supply direction. Check the Part data and the Device data. Check
the image acquisition conditions.
第 1749 页
------------------------------
Code: 1D42C6??
Display: Same as code.
Used by:
Cause: The right edge of the part's body could not be found.
Remedy: Check the part's shape and supply direction. Check the Part data and the Device data. Check
the image acquisition conditions.
------------------------------
Code: 1D42C7??
Display: Same as code.
Used by:
Cause: The upper edge of the part's body could not be found.
Remedy: Check the part's shape and supply direction. Check the Part data and the Device data. Check
the image acquisition conditions.
------------------------------
Code: 1D42D000
Display: Same as code.
Used by:
Cause: The pickup position error (in the X direction) is excessive.
Remedy: Check the manner in which parts are supplied.
------------------------------
Code: 1D42D080
Display: Same as code.
Used by:
Cause: The pickup position error (in the Y direction) is excessive.
Remedy: Check the manner in which parts are supplied.
------------------------------
Code: 1D42D100
Display: Same as code.
Used by:
Cause: The part's inclination is excessive.
Remedy: Check the manner in which parts are supplied.
------------------------------
Code: 1D42E???
Display: Same as code.
Used by:
Cause: The machine has determined that imaging conditions are not correct.
Remedy: Check the part's shape and supply direction. Check the Part data and the Device data. Check
the image acquisition conditions. In particular, check for soiling of the nozzle, and make sure that the
CCD level is correct.
------------------------------
Code: 1D42F???
Display: Same as code.
Used by:
Cause: There is a logical error in the processing program. The part cannot be processed due to an
excessive discrepancy between the Part data and the actual values for the part.
Remedy: Check the Part data.
------------------------------
Code: 1D430002
Display: Same as code.
Used by:
第 1750 页
Cause: The machine failed to pick up a part. The nozzle being used is too large for the part. The part
cannot be identified in the vision processing image.
Remedy: Supply the part. If this error occurs even though a part has been picked up, use a smaller
nozzle for the part. Reduce the CCD level so that the part image becomes visible.
------------------------------
Code: 1D434001
Display: Same as code.
Used by:
Cause: The part's outline could not be found.
Remedy: Check the part's shape and the image acquisition conditions.
------------------------------
Code: 1D434006
Display: Same as code.
Used by:
Cause: The part's inclination is excessive.
Remedy: Check the manner in which the part is picked up and the image acquisition conditions.
------------------------------
Code: 1D434007
Display: Same as code.
Used by:
Cause: The part's outline could not be found.
Remedy: Check the part's shape and the image acquisition conditions.
------------------------------
Code: 1D434008
Display: Same as code.
Used by:
Cause: The Part data does not indicate two or more leads on the upper and lower sides.
Remedy: Two or more leads per side are required for Vision #12. If the part does not have such leads,
select another appropriate vision number.
------------------------------
Code: 1D434009
Display: Same as code.
Used by:
Cause: The part's outline could not be found.
Remedy: Check the part's shape and the image acquisition conditions.
------------------------------
Code: 1D43400A
Display: Same as code.
Used by:
Cause: The part's outline could not be found.
Remedy: Check the part's shape and the image acquisition conditions.
------------------------------
Code: 1D43400B
Display: Same as code.
Used by:
Cause: The first lead on each side could not be found.
Remedy: Check the lead width, the part supply direction, and the image acquisition conditions.
------------------------------
Code: 1D43400C
Display: Same as code.
Used by:
第 1751 页