FUJI错误代码查询.pdf - 第884页

------------------------------ Code: 12200004 Display: Failed to create thread. Used by: Cause: Either the system resources are insufficient, the operating system is corrupted, or the operating system installation failed…

100%1 / 5282
Used by:
Cause: DxShell API function is called by mistake.
Remedy: Obtain the trace data and contact Fuji.
------------------------------
Code: 12112010
Display: DxShell internal error.(Parameter error.)
Used by:
Cause: DxShell was set an invalid parameter.
Remedy: Obtain the trace data and contact Fuji.
------------------------------
Code: 12112011
Display: DxShell internal error.(No data.)
Used by:
Cause: It was not possible to get data from DxShell.
Remedy: Obtain the trace data and contact Fuji.
------------------------------
Code: 12112020
Display: DxShell internal error.(Response data timeout.)
Used by:
Cause: The time-out interval elapsed, and the response data did not receive.
Remedy: Contact Fuji if this error cannot be corrected, because the LON communication function could
be damaged.
------------------------------
Code: 12112021
Display: DxShell internal error.(Write data error.)
Used by:
Cause: It was not possible to do writing in LON communication port
Remedy: Contact Fuji if this error cannot be corrected, because the LON communication function could
be damaged.
------------------------------
Code: 12200001
Display: Failed to create shared memory.
Used by:
Cause: Either the system resources are insufficient, the operating system is corrupted, or the operating
system installation failed.
Remedy: Reinstall the recovery media software if this error cannot be corrected, because the hard disk
could be damaged.
------------------------------
Code: 12200002
Display: Failed to start process.
Used by:
Cause: The required file is either corrupted, or missing.
Remedy: Reinstall the recovery media software if this error cannot be corrected, because the hard disk
could be damaged.
------------------------------
Code: 12200003
Display: Failed to set the axes gear ratio.
Used by:
Cause: Failed to access the servo control board, or the servo board device driver is corrupted.
Remedy: Reinstall the recovery media software if this error cannot be corrected, because the servo control
board could be damaged.
第 883 页
------------------------------
Code: 12200004
Display: Failed to create thread.
Used by:
Cause: Either the system resources are insufficient, the operating system is corrupted, or the operating
system installation failed.
Remedy: Reinstall the recovery media software if this error cannot be corrected, because the hard disk
could be damaged.
------------------------------
Code: 12200005
Display: Failed to create event.
Used by:
Cause: Either the system resources are insufficient, the operating system is corrupted, or the operating
system installation failed.
Remedy: Reinstall the recovery media software if this error cannot be corrected, because the hard disk
could be damaged.
------------------------------
Code: 12200006
Display: Failed to create semaphore.
Used by:
Cause: Either the system resources are insufficient, the operating system is corrupted, or the operating
system installation failed.
Remedy: Reinstall the recovery media software if this error cannot be corrected, because the hard disk
could be damaged.
------------------------------
Code: 12200007
Display: Event creation abnormal.
Used by:
Cause: From the RTX process, Win32 event creation was abnormal. It is possible that the system
installation failed.
Remedy: Reinstall the system. If this error is not corrected after the reinstall, the servo controller could be
damaged.
------------------------------
Code: 12200008
Display: Semaphore creation abnormal.
Used by:
Cause: From the RTX process Win32 semaphore creation was abnormal. It is possible that the system
installation failed.
Remedy: Reinstall the system. If this error is not corrected after the reinstall, the servo controller could be
damaged.
------------------------------
Code: 12200009
Display: Process creation abnormal.
Used by:
Cause: From the RTX process Win32 process creation was abnormal. It is possible that the system
installation failed.
Remedy: Reinstall the system. If this error is not corrected after the reinstall, the servo controller could be
damaged.
------------------------------
Code: 1220000a
Display: Missing file.
第 884 页
Used by:
Cause: A file required cannot be found. The required file could either be corrupted or may have been
deleted.
Remedy: Reinstall the system. If the same error occurs after the reinstallation, the hard disk could be
damaged.
------------------------------
Code: 1220000b
Display: Synchronize object error.
Used by:
Cause: Object synchronization was not completed. The system resources are insufficient, the operating
system is corrupted, or the operating system installation failed.
Remedy: Reinstall the recovery media software. If this error cannot be corrected, the hard disk could be
damaged.
------------------------------
Code: 1220000c
Display: Process not ended.
Used by:
Cause: Processing was not completed. The system resources are insufficient, the operating system is
corrupted, or the operating system installation failed.
Remedy: Reinstall the recovery media software. If this error cannot be corrected, the hard disk could be
damaged.
------------------------------
Code: 1220000d
Display: Missing RT process load.
Used by:
Cause: The required file is either corrupted or may have been deleted.
Remedy: Reinstall the recovery media software. If this error cannot be corrected, the hard disk could be
damaged.
------------------------------
Code: 1220000e
Display: Failed to create object.
Used by:
Cause: Failed to create the servo driver control object, or the servo controller device driver file is
corrupted.
Remedy: Reinstall the recovery media software. If this error cannot be corrected, the servo control board
could be damaged.
------------------------------
Code: 1220000f
Display: Firmware does not match.
Used by:
Cause: The version check performed after a servo control board firmware upgrade has found that the
version does not match.
Remedy: Reinstall the recovery media software. If this error cannot be corrected, the servo control board
could be damaged.
------------------------------
Code: 12200011
Display: Failed to access the firmware.
Used by:
Cause: Failed to access the servo control firmware, or the servo controller device driver is corrupted.
Remedy: Reinstall the recovery media software. If this error cannot be corrected, the servo control board
could be damaged.
第 885 页