FUJI错误代码查询.pdf - 第222页

Code: 110823D0 Display: Y-Axis Not in Retract Pos Used by: MTU4 Cause: The Y axis speed reduction sensor was not on when the T axis attempted to move. Remedy: Check the Y axis speed reduction sensor and the dog. Also che…

------------------------------

Code: 11082360

Display: Waffle Tray Overloaded Remove Part

Used by: MTU4

Cause: Too many waffle trays have been stacked up.

Remedy: Remove the overstacked waffle trays.

------------------------------

Code: 11082370

Display: Reject Tray Box Full

Used by: MTU4

Cause: This error occurs when discarded trays accumulate, causing the sensor beam to be cut for a

continued period of time.

Remedy: Remove the accumulated trays. Check the adjustment of the sensors. Check that there are no

other objects in the tray area.

------------------------------

Code: 11082380

Display: Tray Reject Error

Used by: MTU4

Cause: This error occurs when a tray which is to be ejected is released at the eject position but the eject

sensor does not detect the falling tray.

Remedy: If the tray cannot be picked up, adjust the tray pick up point set in part data's Tray_pickup_pnt

and check that the tray can be picked up. Furthermore, if this error occurs even when the tray is picked

up, check the sensor.

------------------------------

Code: 11082390

Display: Tray Plate Setting Error

Used by: MTU4

Cause: The tray plate set sensor was activated while the T axis was moving.

Remedy: Check that the tray plate door is not open and that the tray plate is firmly positioned.

------------------------------

Code: 110823A0

Display: No Tray

Used by: MTU4

Cause: There are no trays but manual tray positioning was attempted.

Remedy: Supply trays.

------------------------------

Code: 110823B0

Display: Tray Space Chk Sens. Not ON

Used by: MTU4

Cause: The robot safety sensor was not on when the Y axis moved to pick up a tray part or to eject a

tray.

Remedy: Check the robot safety sensor and the dog. Also check that a suitable value is entered for the

MTU Proper data item Origin_Position_T0 to ensure that the T axis origin is at the correct position.

------------------------------

Code: 110823C0

Display: Tray Number Internal Error

Used by: MTU3,MTU4,MTU

Cause: During tray positioning, an abnormal tray number was detected.

Remedy: Initialize the memory.

------------------------------

第 221 页

Code: 110823D0

Display: Y-Axis Not in Retract Pos

Used by: MTU4

Cause: The Y axis speed reduction sensor was not on when the T axis attempted to move.

Remedy: Check the Y axis speed reduction sensor and the dog. Also check that a suitable value has been

entered for the MTU4 Proper data item Carrier_Position_SY.

------------------------------

Code: 11082400

Display: 11082400

Used by: MTU3,MTU5

Cause: An attempt was made to advance the Y axis to the Z axis interlock position.

Remedy: Check the Z axis interlock sensor and dog.

------------------------------

Code: 11082410

Display: 11082410

Used by: MTU3,MTU5

Cause: When the sub-nozzle placed a part on the conveyor, the nozzle's vacuum sensor judged that there

was still a part on the nozzle.

Remedy: Check the mouth of the nozzle, the air supply, the sensor etc.

------------------------------

Code: 11082420

Display: 11082420

Used by: MTU3,MTU5

Cause: A tray part picked up by the sub-nozzle was dropped before it was placed on the conveyor.

Remedy: Check the mouth of the nozzle, the air supply system etc. Also check that suitable values have

been entered in part data and for the Proper data item Tray_Pos_T.

------------------------------

Code: 11082421

Display: 11082421

Used by: MTU3,MTU5

Cause: When an attempt was made to deliver a part to the IP machine, the conveyor parts check sensor

judged that there was no part on the conveyor.

Remedy: Check whether the part fell off the conveyor during delivery.

------------------------------

Code: 11082430

Display: 11082430

Used by: MTU3,MTU5

Cause: When the X and Z axes attempted to move during automatic operation, the Y axis retract sensor

was not on.

Remedy: Check that a suitable value has been entered for the Proper data item Interlock_SY.

Furthermore, adjust the sensor and the dog.

------------------------------

Code: 11082440

Display: 11082440

Used by: MTU3,MTU5

Cause: The Z axis retract sensor was off when the sub-nozzle shaft retracted during automatic operation.

Remedy: Check that the nozzle retracts correctly. Also check that the sensor is functioning correctly.

------------------------------

Code: 11082450

Display: 11082450

Used by: MTU3,MTU5

第 222 页

Cause: According to the conveyor end sensor there is a part on the conveyor.

Remedy: Due to a pickup mistake made by the IP machine, there is an unnecessary part on the conveyor.

In this case, remove the part.

------------------------------

Code: 11082460

Display: 11082460

Used by: MTU3,MTU5

Cause: The parts supply door at the back of the MTU is open.

Remedy: Close the door. In addition, check that the door is properly positioned.

------------------------------

Code: 11082490

Display: 11082490

Used by: MTU3,MTU5

Cause: The tray set sensor is off. A tray may have stopped mid-way through being ejected.

Remedy: Check that all of the trays in the column at the nozzle position where the error occurred are

correctly positioned. In addition, check that the sensor positions match the tray positions.

------------------------------

Code: 110824A0

Display: 110824A0

Used by: MTU3,MTU5

Cause: There is an unexpected part on the sub-nozzle. The part may have been placed there by the

operator.

Remedy: Remove the part on the sub-nozzle.

------------------------------

Code: 11083200

Display: Sequence number is out of range.

Used by: MTU4

Details: The sequence number is out of the valid range.

Cause:

Remedy: Ensure that the sequence number is between 1 and 4999.

------------------------------

Code: 11083210

Display: Device number is out of range.

Used by: MTU4

Details: The device number for the tray part is out of the valid range.

Cause:

Remedy: Ensure that the first digit in the device number is 1 for a tray unit on the right side, or 3 for a

tray unit on the left side. The second digit in the device number must be between 0 to 9, and the last digit

in the device number must be between 1 to 4.

------------------------------

Code: 11083220

Display: Terminate setting out of range.

Used by: MTU4

Details: A setting for a terminate sequence is out of the valid range.

Cause:

Remedy: The setting for the terminate sequence must either be ˇˇ(for a non terminate sequence) or

ˇˇ(for a terminate sequence).

------------------------------

Code: 110832F0

Display: Sequence Data Device Number Out of Range

Used by: MTU3,MTU4,MTU5

第 223 页