FUJI错误代码查询.pdf - 第1978页
Remedy: Reboot the MCS. ------------------------------ Code: 2100791E Display: Used by: Cause: Queuing error. Remedy: Reboot the MCS. ------------------------------ Code: 2100791F Display: Queue data moving error Used by…
Display: Pairing data file read error
Used by:
Cause: The pairing data file cannot be read.
Remedy: Re-install the pairing data file.
------------------------------
Code: 21007916
Display: Environment file open error
Used by:
Cause: The environment file cannot be opened.
Remedy: Re-install the environment file.
------------------------------
Code: 21007917
Display: Environment file read error
Used by:
Cause: The environment file cannot be read.
Remedy: Re-install the environment file.
------------------------------
Code: 21007918
Display: Index file open error
Used by:
Cause: The index file cannot be opened.
Remedy: Re-install the index file.
------------------------------
Code: 21007919
Display: Index file read error
Used by:
Cause: The index file cannot be read.
Remedy: Re-install the index file.
------------------------------
Code: 2100791A
Display: Memory full
Used by:
Cause: The memory is full.
Remedy: Reboot the MCS.
------------------------------
Code: 2100791B
Display: Read pipe create error
Used by:
Cause: The read pipe cannot be created.
Remedy: Reboot the MCS.
------------------------------
Code: 2100791C
Display: Write pipe create error
Used by:
Cause: The write pipe cannot be created.
Remedy: Reboot the MCS.
------------------------------
Code: 2100791D
Display: Dequeuing error
Used by:
Cause: The queue cannot be separated.
第 1977 页
Remedy: Reboot the MCS.
------------------------------
Code: 2100791E
Display:
Used by:
Cause: Queuing error.
Remedy: Reboot the MCS.
------------------------------
Code: 2100791F
Display: Queue data moving error
Used by:
Cause: Queue data cannot be moved.
Remedy: Reboot the MCS.
------------------------------
Code: 21007920
Display: Strategy file read error
Used by:
Cause: The strategy file cannot be read.
Remedy: Re-install the strategy file.
------------------------------
Code: 21007921
Display: Make not mark sequence
Used by:
Cause: Error occurred when special sequence created for output program.
Remedy: Reboot the MCS.
------------------------------
Code: 21007922
Display: No entry Input file name
Used by:
Cause: The input file name is not defined.
Remedy: Check the start up parameters and then restart the machine.
------------------------------
Code: 21007923
Display: Output file already exist
Used by:
Cause: The output file name already exists.
Remedy: Change the output file name or select the rewrite mode.
------------------------------
Code: 21007924
Display: Input file data type unmatch
Used by:
Cause: The data type of the input file is different from the production program.
Remedy: Specify the production program's file name.
------------------------------
Code: 21007925
Display: Base program file data type unmatch
Used by:
Cause: The data type of the base program is different from the production program.
Remedy: Specify the production program's file name.
------------------------------
Code: 21007926
第 1978 页
Display: PST file data type unmatch
Used by:
Cause: The permanent set table name is not PST.
Remedy: At the end of the permanent set table name append the extension .PST.
------------------------------
Code: 21007927
Display: Nozzle assignment table file data type unmatch
Used by:
Cause: The nozzle assignment table data type is not NAT.
Remedy: At the end of the nozzle assignment table name in the production program append the extension
.NAT.
------------------------------
Code: 21007928
Display: Input file machine type unmatch
Used by:
Cause: The machine type of the input file is not FCP6.
Remedy: Specify the input file as an FCP6 production program.
------------------------------
Code: 21007929
Display: Base program file machine type unmatch
Used by:
Cause: The machine type of the base program is not FCP6.
Remedy: Specify the input file as an FCP6 production program.
------------------------------
Code: 2100792A
Display: Nozzle assignment table file machine type unmatch
Used by:
Cause: The machine type of the nozzle assignment table is not FCP6.
Remedy: Specify the nozzle assignment table in the production program as an FCP6 nozzle assignment
table.
------------------------------
Code: 2100792B
Display: Input file expand error
Used by:
Cause: An error occurred while the input file was being expanded.
Remedy: Press Ctrl + E to check the error.
------------------------------
Code: 2100792C
Display: Base program file expand error
Used by:
Cause: An error occurred while the base program was being expanded.
Remedy: Press Ctrl + E to check the error.
------------------------------
Code: 2100792D
Display: Not get Part data file name
Used by:
Cause: The Part data name could not be obtained from the input file.
Remedy: Register the Part data name in the program's device data.
------------------------------
Code: 2100792E
Display: Not get Nozzle assignment file name
第 1979 页