FUJI错误代码查询.pdf - 第520页

between the rotor and the nozzle. ------------------------------ Code: 12052006 Display: "R REACH ERR" (CP), "CHECK R-AXIS" (CP3) Used by: CP3 Cause: A cycle alarm has occurred for servo axis R. The s…

100%1 / 5282
法操作后还是无法消除异常，则请联系代理店。
------------------------------
Code: 12050504
Display:
Used by:
Cause:
Remedy:
------------------------------
Code: 12052001
Display: "CHECK SERVO" (CP), "Servo NG" (GL)
Used by: CP3,GL2,GL5,GL541,GSP2,GSP3,GSP5,GP551,GP6,IP1,NP132.NP133
Cause: A cycle alarm has occurred in a servo system, or a motor's thermal relay has been tripped.
Remedy: Make sure the servo axes are not overloaded. Inspect the connectors and wiring for motors and
servo amps. Press the thermal relay's reset button to cancel the error. If a thermal relay hasbeen tripped,
press the thermal relay's reset button. Turn the machine's power off, then restart the machine.
------------------------------
Code: 12052002
Display: CHECK C AXIS
Used by: CP3,CP6,CP6M,CP65,CP652C,CP642,CP643
Cause: The cam axis does not reach target position within the set time limit (CP).
Remedy: Check the cam axis.
------------------------------
Code: 12052003
Display: "X REACH ERR" (CP), "Cycle alarm: servo X(X1)" (IP, IP2, GSP, GL),
"CHECK X-AXIS" (CP3), or "Cycle alarm X: Reach" (CP6)
Used by: CP3,CP4-1,CP4-2,CP4-
3,CP6,CP6M,CP65,CP652C,CP642,CP643,GL2,GL5,GL541,GSP2,GSP3,GP2,GP3,IP1,IP2,IP3
Cause: A cycle alarm has occurred for servo axis X. The servo axis did not reach the targeted value
within the expected time. This error may be caused by interference from another object.
Remedy: Make sure the servo is not overloaded. Inspect the connectors and wiring for the motor and
servo amp. Inspect the servo amp. Remove any interfering objects.
------------------------------
Code: 12052004
Display: "Y REACH ERR" (CP), "Cycle alarm: servo Y(Y1)" (IP, IP2, GSP, GL),
"CHECK Y-AXIS" (CP3), or "Cycle alarm Y: Reach" (CP6)
Used by: CP3,CP4-1,CP4-2,CP4-
3,CP6,CP6M,CP65,CP652C,CP642,CP643,GL2,GL5,GL541,GSP2,GSP3,GSP5,GP6,GP2,GP3,GP551,IP1,IP2
,IP3
Cause: A cycle alarm has occurred for servo axis Y. The servo axis did not reach the targeted value
within the expected time. This error may be caused by interference from another object.
Remedy: Make sure the servo is not overloaded. Inspect the connectors and wiring for the motor and
servo amp. Inspect the servo amp. Remove any interfering objects.
------------------------------
Code: 12052005
Display: "Q REACH ERR" (CP), "Cycle alarm: servo Q(Q1)" (IP, IP2, GL), or
"CHECK Q-AXIS" (CP3)
Used by: CP3,GL2,GL5,GL541,IP1,IP2,IP3
Cause: A cycle alarm has occurred for servo axis Q. The servo axis did not reach the targeted value
within the expected time. This error may be caused by interference from another object.
Remedy: Make sure the servo is not overloaded. Inspect the connectors and wiring for the motor and
servo amp. Inspect the servo amp. Remove any interfering objects. On the CP3, check the meshing
第 519 页
between the rotor and the nozzle.
------------------------------
Code: 12052006
Display: "R REACH ERR" (CP), "CHECK R-AXIS" (CP3)
Used by: CP3
Cause: A cycle alarm has occurred for servo axis R. The servo axis did not reach the targeted value
within the expected time. This error may be caused by interference from another object.
Remedy: Make sure the servo is not overloaded. Inspect the connectors and wiring for the motor and
servo amp. Inspect the servo amp. Remove any interfering objects. On the CP3, check the meshing
between the rotor and the nozzle.
------------------------------
Code: 12052007
Display: "D REACH ERR" (CP), "CHECK D-AXIS" (CP3)
Used by: CP3,CP4-1,CP4-2
Cause: A cycle alarm has occurred for servo axis D. The servo axis did not reach the targeted value
within the expected time. This error may be caused by interference from another object.
Remedy: Make sure the servo is not overloaded. Inspect the connectors and wiring for the motor and
servo amp. Inspect the servo amp. Remove any interfering objects.
------------------------------
Code: 12052008
Display: "C REACH ERR" (CP)
Used by:
Cause: A cycle alarm has occurred for servo axis C. The servo axis did not reach the targeted value
within the expected time. This error may be caused by interference from another object.
Remedy: Make sure the servo is not overloaded. Inspect the connectors and wiring for the motor and
servo amp. Inspect the servo amp. Remove any interfering objects.
------------------------------
Code: 12052009
Display: "Cycle alarm: servo Z(Z1)" (IP), "Cycle alarm Z: Reach" (CP6)
Used by: CP4-1,CP4-2,CP4-
3,CP6,CP6M,CP65,CP652C,CP642,CP643,GL5,GL541,GSP5,GP2,GP3,GP551,GP6,IP1,IP3
Cause: A cycle alarm has occurred for servo axis C. The servo axis did not reach the targeted value
within the expected time. This error may be caused by interference from another object.
Remedy: Make sure the servo is not overloaded. Inspect the connectors and wiring for the motor and
servo amp. Inspect the servo amp. Remove any interfering objects.
------------------------------
Code: 1205200A
Display: "Cycle alarm: servo SX" (IP)
Used by: IP1
Cause: A cycle alarm has occurred for servo axis SX.The servo axis did not reach the targeted value
within the expected time. This error may be caused by interference from another object.
Remedy: Make sure the servo is not overloaded. Inspect the connectors and wiring for the motor and
servo amp. Inspect the servo amp. Remove any interfering objects.
------------------------------
Code: 1205200B
Display: "Cycle alarm: servo SY" (IP)
Used by: IP1
Cause: A cycle alarm has occurred for servo axis SY.The servo axis did not reach the targeted value
within the expected time. This error may be caused by interference from another object.
Remedy: Make sure the servo is not overloaded. Inspect the connectors and wiring for the motor and
servo amp. Inspect the servo amp. Remove any interfering objects.
第 520 页
------------------------------
Code: 1205200C
Display: "Cycle alarm: servo LT" (IP)
Used by: IP1
Cause: A cycle alarm has occurred for servo axis LT.The servo axis did not reach the targeted value
within the expected time. This error may be caused by interference from another object.
Remedy: Make sure the servo is not overloaded. Inspect the connectors and wiring for the motor and
servo amp. Inspect the servo amp. Remove any interfering objects.
------------------------------
Code: 1205200D
Display: "Cycle alarm: servo RT" (IP)
Used by: IP1
Cause: A cycle alarm has occurred for servo axis RT.The servo axis did not reach the targeted value
within the expected time. This error may be caused by interference from another object.
Remedy: Make sure the servo is not overloaded. Inspect the connectors and wiring for the motor and
servo amp. Inspect the servo amp. Remove any interfering objects.
------------------------------
Code: 1205200E
Display: "Cycle alarm: servo X2"
Used by: IP2,IP3
Cause: A cycle alarm has occurred for servo axis X2.The servo axis did not reach the targeted value
within the expected time. This error may be caused by interference from another object.
Remedy: Make sure the servo is not overloaded. Inspect the connectors and wiring for the motor and
servo amp. Inspect the servo amp. Remove any interfering objects.
------------------------------
Code: 1205200F
Display: "Cycle alarm: servo Q2"
Used by: IP2
Cause: A cycle alarm has occurred for servo axis Q2.The servo axis did not reach the targeted value
within the expected time. This error may be caused by interference from another object.
Remedy: Make sure the servo is not overloaded. Inspect the connectors and wiring for the motor and
servo amp. Inspect the servo amp. Remove any interfering objects.
------------------------------
Code: 12052010
Display: "Cycle alarm: servo Z2" (IP2)
Used by: GL5,GL541,GSP5,GP551,IP2
Cause: A cycle alarm has occurred for servo axis Z2.The servo axis did not reach the targeted value
within the expected time. This error may be caused by interference from another object.
Remedy: Make sure the servo is not overloaded. Inspect the connectors and wiring for the motor and
servo amp. Inspect the servo amp. Remove any interfering objects.
------------------------------
Code: 12052011
Display: "Cycle alarm: servo S" (GSP)
Used by: GSP2,GSP3,GSP5,GP2,GP3,GP551,GP6
Cause: A cycle alarm has occurred for servo axis S. The servo axis did not reach the targeted value
within the expected time. This error may be caused by interference from another object.
Remedy: Make sure the servo is not overloaded. Inspect the connectors and wiring for the motor and
servo amp. Inspect the servo amp. Remove any interfering objects.
------------------------------
Code: 12052012
Display: "Cycle alarm: servo ZL" (GL)
第 521 页