FUJI错误代码查询.pdf - 第1972页
Remedy: Re-install the machine type table. ------------------------------ Code: 2100782D Display: Can not generate cartridge name Used by: Cause: The feeder could not be automatically generated from Part data. Remedy: Ed…
Display: Index file open error
Used by:
Cause: Index file open error.
Remedy: Re-install the file.
------------------------------
Code: 21007825
Display: Index file read error
Used by:
Cause: Index file read error.
Remedy: Re-install the file.
------------------------------
Code: 21007826
Display: Memory full
Used by:
Cause: Memory is full.
Remedy: Re-boot MCS.
------------------------------
Code: 21007827
Display: Queuing error
Used by:
Cause: Queuing error.
Remedy: Re-execute the optimizer.
------------------------------
Code: 21007828
Display: Dequeuing error
Used by:
Cause: Dequeuing error.
Remedy: Re-execute the optimizer.
------------------------------
Code: 21007829
Display: Queue data moving error
Used by:
Cause: Queue data moving error.
Remedy: Re-execute the optimizer.
------------------------------
Code: 2100782A
Display: Not get cycle time
Used by:
Cause: Cycle time could not be obtained.
Remedy: Edit Part data at the editor. Alternately, re-install the MTT (machine type table).
------------------------------
Code: 2100782B
Display: Not get Occupancy data
Used by:
Cause: Occupancy data could not be obtained from the machine type table.
Remedy: Re-install the machine type table.
------------------------------
Code: 2100782C
Display: Not get slot info data
Used by:
Cause: Slot data could not be obtained from the machine type table.
第 1971 页
Remedy: Re-install the machine type table.
------------------------------
Code: 2100782D
Display: Can not generate cartridge name
Used by:
Cause: The feeder could not be automatically generated from Part data.
Remedy: Edit Part data at the editor.
------------------------------
Code: 2100782E
Display: Not used Cartridge
Used by:
Cause: The feeder types are not registered in the machine type table.
Remedy: Use feeders which have been registered in the machine type table.
------------------------------
Code: 2100782F
Display: Can not feedback Fix device
Used by:
Cause: Could not receive feedback from fixed devices.
Remedy: Fix the permanent set table device numbers and device comments at the editor.
------------------------------
Code: 21007830
Display: Different cartridge name in PT file
Used by:
Cause: When a fixed device was arranged, an error occurred.
Remedy: Put the same feeder names in the PT file and the input program's specified devices.
------------------------------
Code: 21007831
Display: Not get PD file name
Used by:
Cause: The Part data name could not be obtained from the input program.
Remedy: Edit the input program at the editor.
------------------------------
Code: 21007832
Display: Not get holder number
Used by:
Cause: The holder number could not be obtained.
Remedy: Edit the lead pitch, body size and nozzle name at the device's Part data.
------------------------------
Code: 21007833
Display: St.1 and St.2 device over
Used by:
Cause: There are too many devices at the station, so the devices cannot be arranged.
Remedy: Decrease the number of feeders in the input program.
------------------------------
Code: 21007834
Display: Rtray and Ltray device over
Used by:
Cause: There are too many skipped devices at the station, so the devices cannot be arranged.
Remedy: Decrease the number of feeders in the input program.
------------------------------
Code: 21007835
第 1972 页
Display: Skip device mount error
Used by:
Cause: There are too many skipped devices at the station, so the devices cannot be arranged.
Remedy: Skipped devices cannot be overwritten to an output file.
------------------------------
Code: 21007836
Display: Next device mount error
Used by:
Cause: There are too many next devices at the station, so the devices cannot be arranged.
Remedy: Next devices cannot be overwritten to an output file.
------------------------------
Code: 21007837
Display: Can not make mount sequence
Used by:
Cause: The order of mount sequences cannot normally be changed.
Remedy: None.
------------------------------
Code: 21007838
Display: Strategy file read error
Used by:
Cause: Strategy file read error.
Remedy: Reinstall the system.
------------------------------
Code: 21007839
Display: Cannot make mark sequence
Used by:
Cause: Cannot create mark sequences.
Remedy: Reinstall MCS.
------------------------------
Code: 2100783A
Display: Output file has not sequence
Used by:
Cause: Output file has no sequences.
Remedy: Specify an input program with sequences.
------------------------------
Code: 2100783B
Display: No entry machine name
Used by:
Cause: FIP3 is not registered in Part data's separator data.
Remedy: Register the FIP3 and add FIP3 data in Part data's separator.
------------------------------
Code: 2100783C
Display: "Not get queue position"
Used by:
Cause: This is a system error. It should not occur under normal circumstances.
Remedy: Stop the FIP-III optimizer, then reexecute.
------------------------------
Code: 2100783D
Display: "Undefined cartridge name for device in PT file"
Used by:
Cause: The feeder type cannot be determined, because the feeder type has not been entered in the device
第 1973 页