FUJI错误代码查询.pdf - 第682页

Code: 1206858A Display: TY-axis: Regeneration error! Used by: QP3,NP2 Cause: Remedy: Check that the regenerative resistance wiring is connected to the servo amplifier. ------------------------------ Code: 1206858B Displa…

100%1 / 5282
Remedy: Reset the servo amp.
------------------------------
Code: 12068582
Display: TY-axis: User constant setting warning.
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 12068583
Display: TY-axis: MECHATROLINK command warning.
Used by: QP3,NP2
Cause:
Remedy: Check if the digital operator is still connected to a servo amplifier.
------------------------------
Code: 12068584
Display: TY-axis: MECHATROLINK communication error warning.
Used by: QP3,NP2
Cause:
Remedy: Check that the MECHATROLINK communications cable between the MTU controller and servo
amplifier is connected correctly.
------------------------------
Code: 12068585
Display: TY-axis: User constant corruption error!
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 12068586
Display: TY-axis: Main circuit detection error!
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 12068587
Display: TY-axis: A parameter setting error!
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 12068588
Display: TY-axis: Motor/servo capacity mismatch.
Used by: QP3,NP2
Cause:
Remedy: Check that the motor and servo amplifier are connected correctly.
------------------------------
Code: 12068589
Display: TY-axis: Overcurrent error!
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
第 681 页
Code: 1206858A
Display: TY-axis: Regeneration error!
Used by: QP3,NP2
Cause:
Remedy: Check that the regenerative resistance wiring is connected to the servo amplifier.
------------------------------
Code: 1206858B
Display: TY-axis: Regeneration overload.
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 1206858C
Display: TY-axis: Overvoltage error!
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 1206858D
Display: TY-axis: Insufficient voltage error!
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 1206858E
Display: TY-axis: Excess travel speed error!
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 1206858F
Display: TY-axis: Overload peak error!
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 12068590
Display: TY-axis: Structural overload error!
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 12068591
Display: TY-axis: DB overload error!
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 12068592
Display: TY-axis: Surge current limit resistor overload.
Used by: QP3,NP2
第 682 页
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 12068593
Display: TY-axis: Heat sink overheating error!
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 12068594
Display: TY-axis: Absolute encoder backup error!
Used by: QP3,NP2
Cause:
Remedy: It is necessary to set up the absolute encoder.After the setup is complete, remeasure the
calibration data.
------------------------------
Code: 12068595
Display: TY-axis: Absolute encoder checksum error!
Used by: QP3,NP2
Cause:
Remedy: It is necessary to set up the absolute encoder.After the setup is complete, remeasure the
calibration data.
------------------------------
Code: 12068596
Display: TY-axis: Absolute encoder battery error!
Used by: QP3,NP2
Cause:
Remedy: With the servo amplifier power on, check the battery connection.
------------------------------
Code: 12068597
Display: TY-axis: Absolute encoder data error!
Used by: QP3,NP2
Cause:
Remedy: Without removing the absolute encoder cable, check the cabling surrounding the encoder, and
fix if necessary.
------------------------------
Code: 12068598
Display: TY-axis: Absolute encoder excess speed error!
Used by: QP3,NP2
Cause: Servo amp error.
Remedy: Reset the servo amp.
------------------------------
Code: 12068599
Display: TY-axis: Encoder overheating error!
Used by: QP3,NP2
Cause:
Remedy: The operating environment for the servo motor should be less than 40q-.
------------------------------
Code: 1206859A
Display: TY-axis: Travel speed instruction A/D error!
Used by: QP3,NP2
第 683 页