FUJI错误代码查询.pdf - 第73页

Display: Used by: Cause: The coordinates specified for the Y-axis in placing sequence data are out of range in the - direction. This error applies to sequences 181 to 200. Remedy: Set a correct "Y" value in N_d…

100%1 / 5282
------------------------------
Code: 1101C062
Display:
Used by:
Cause: The coordinates specified for the Y-axis in placing sequence data are out of range in the -
direction. This error applies to sequences 41 to 60.
Remedy: Set a correct "Y" value in N_data in the production program.
------------------------------
Code: 1101C063
Display:
Used by:
Cause: The coordinates specified for the Y-axis in placing sequence data are out of range in the -
direction. This error applies to sequences 61 to 80.
Remedy: Set a correct "Y" value in N_data in the production program.
------------------------------
Code: 1101C064
Display:
Used by:
Cause: The coordinates specified for the Y-axis in placing sequence data are out of range in the -
direction. This error applies to sequences 81 to 100.
Remedy: Set a correct "Y" value in N_data in the production program.
------------------------------
Code: 1101C065
Display:
Used by:
Cause: The coordinates specified for the Y-axis in placing sequence data are out of range in the -
direction. This error applies to sequences 101 to 120.
Remedy: Set a correct "Y" value in N_data in the production program.
------------------------------
Code: 1101C066
Display:
Used by:
Cause: The coordinates specified for the Y-axis in placing sequence data are out of range in the -
direction. This error applies to sequences 121 to 140.
Remedy: Set a correct "Y" value in N_data in the production program.
------------------------------
Code: 1101C067
Display:
Used by:
Cause: The coordinates specified for the Y-axis in placing sequence data are out of range in the -
direction. This error applies to sequences 141 to 160.
Remedy: Set a correct "Y" value in N_data in the production program.
------------------------------
Code: 1101C068
Display:
Used by:
Cause: The coordinates specified for the Y-axis in placing sequence data are out of range in the -
direction. This error applies to sequences 161 to 180.
Remedy: Set a correct "Y" value in N_data in the production program.
------------------------------
Code: 1101C069
第 72 页
Display:
Used by:
Cause: The coordinates specified for the Y-axis in placing sequence data are out of range in the -
direction. This error applies to sequences 181 to 200.
Remedy: Set a correct "Y" value in N_data in the production program.
------------------------------
Code: 1101C06A
Display:
Used by:
Cause: The coordinates specified for the Y-axis in placing sequence data are out of range in the -
direction. This error applies to sequences 201 to 220.
Remedy: Set a correct "Y" value in N_data in the production program.
------------------------------
Code: 1101C06B
Display:
Used by:
Cause: The coordinates specified for the Y-axis in placing sequence data are out of range in the -
direction. This error applies to sequences 221 to 240.
Remedy: Set a correct "Y" value in N_data in the production program.
------------------------------
Code: 1101C06C
Display:
Used by:
Cause: The coordinates specified for the Y-axis in placing sequence data are out of range in the -
direction. This error applies to sequences 241 to 260.
Remedy: Set a correct "Y" value in N_data in the production program.
------------------------------
Code: 1101C06D
Display:
Used by:
Cause: The coordinates specified for the Y-axis in placing sequence data are out of range in the -
direction. This error applies to sequences 261 to 280.
Remedy: Set a correct "Y" value in N_data in the production program.
------------------------------
Code: 1101C06E
Display:
Used by:
Cause: The coordinates specified for the Y-axis in placing sequence data are out of range in the -
direction. This error applies to sequences 281 to 300.
Remedy: Set a correct "Y" value in N_data in the production program.
------------------------------
Code: 1101C06F
Display:
Used by:
Cause: The coordinates specified for the Y-axis in placing sequence data are out of range in the -
direction. This error applies to sequences 301 to the final sequence.
Remedy: Set a correct "Y" value in N_data in the production program.
------------------------------
Code: 1101C070
Display:
Used by: IP3
第 73 页
Cause: There is a device in the TPU original device setting which is not an original device. This error
applies to devices 1 to 50.
Remedy: Set a correct "OD" value in D_data in the production program.
------------------------------
Code: 1101C071
Display:
Used by: IP3
Cause: There is a device in the TPU original device setting which is not an original device. This error
applies to devices 51 to 100.
Remedy: Set a correct "OD" value in D_data in the production program.
------------------------------
Code: 1101C072
Display:
Used by: IP3
Cause: There is a device where the TPU unit number setting is not correct. This error applies to
sequences 1 to 50.
Remedy: Set a correct "TU" value in D_data in the production program.
------------------------------
Code: 1101C073
Display:
Used by: IP3
Cause: There is a device where the TPU unit number setting is not correct. This error applies to
sequences 51 to 100.
Remedy: Set a correct "TU" value in D_data in the production program.
------------------------------
Code: 1101C074
Display:
Used by: IP3
Cause: There is a device where the TPU magazine number setting is not correct. This error applies to
sequences 1 to 50.
Remedy: Set a correct "TM" value in D_data in the production program.
------------------------------
Code: 1101C075
Display:
Used by: IP3
Cause: There is a device where the TPU magazine number setting is not correct. This error applies to
sequences 51 to 100.
Remedy: Set a correct "TM" value in D_data in the production program.
------------------------------
Code: 1101C076
Display:
Used by: IP3
Cause: There is a device where the TPU unit number and magazine number match was previously
specified for another device. This error applies to sequences 1 to 50.
Remedy: Check that "TU" and "TM" in D_data in the production program match, and that the data is
correct.
------------------------------
Code: 1101C077
Display:
Used by: IP3
Cause: There is a device where the TPU unit number and magazine number match was previously
第 74 页