FUJI错误代码查询.pdf - 第1155页
Used by: QP132 Cause: The pallet unload cylinder extend sensor (X061: P.OUT FWEND) did not come on in the given time (QP-132). Remedy: Check operation using I/O commands and adjust if necessary. -------------------------…
Code: 15040783
Display: LD TRANS BACKWARD TUP
Loader error: 15040783
Used by: QP132
Cause: The pallet pusher that moves a pallet from the return-conveyor to the pallet loader did not finish
retracting in the given time.
Remedy: Check the X04B: RCV PUSH BWEND operation using I/O commands and adjust if necessary.
------------------------------
Code: 15040784
Display: RCV-LD CHANGE TUP
Loader error: 15040784
Used by: QP132
Cause: The loader's pallet sensor did not come on when the pallet was moved from the return-conveyor
to the pallet loader.
Remedy: Check the X050: P.IN ARRV CK operation using I/O commands and adjust if necessary.
------------------------------
Code: 15040801
Display: PO POSITIONING ERROR
Loader error: 15040801
Used by: QP132
Cause: There is a difference of at least 10 pulses between the movement command position and the
current position of the PO-axis.
Remedy: Make sure there is no load on the PO-axis, and restart.
------------------------------
Code: 15040856
Display: UNLD PCB CLAMP TUP
Loader error: 15040856
Used by: QP132
Cause: The unloaded pallet closed check (X064: P.OUT PLT CLS) did not come on in the given time (QP-
132).
Remedy: Check operation using I/O commands and adjust if necessary.
------------------------------
Code: 15040857
Display: UNLD PCB UNCLAMP TUP
Loader error: 15040857
Used by: QP132
Cause: The unloaded pallet open check (X063: P.OUT PLT OPN) did not come on in the given time (QP-
132).
Remedy: Check operation using I/O commands and adjust if necessary.
------------------------------
Code: 15040860
Display: UNLD BACKWARD TUP
Loader error: 15040860
Used by: QP132
Cause: The pallet unloaded cylinder retract sensor (X062: P.OUT BWD) did not come on in the given time
(QP-132).
Remedy: Check operation using I/O commands and adjust if necessary.
------------------------------
Code: 15040861
Display: UNLD FORWARD TUP
Loader error: 15040861
第 1154 页
Used by: QP132
Cause: The pallet unload cylinder extend sensor (X061: P.OUT FWEND) did not come on in the given
time (QP-132).
Remedy: Check operation using I/O commands and adjust if necessary.
------------------------------
Code: 15040862
Display: UNLD PLT CLAMP TUP
Loader error: 15040862
Used by: QP132
Cause: The unloaded pallet unclamp check sensor (X072: P OUT PLT UCLP) did not turn off in the given
time (QP-132).
Remedy: Check operation using I/O commands and adjust if necessary.
------------------------------
Code: 15040863
Display: UNLD PLT UNCLAMP TUP
Loader error: 15040863
Used by: QP132
Cause: The OUT pallet unclamp limit check sensor (X05C:P OUT PLT UCLP) did not turn on within the
specified time.
Remedy: Use I/O commands to make sure that the sensor is functioning normally, and adjust it if
necessary.
------------------------------
Code: 15040866
Display: UNLD MANI HOOK OPEN TUP
Loader error: 15040866
Used by: QP132
Cause: The out-conveyor manipulator claw has not opened in the given time.
Remedy: Check the PCB unload claw (X07B: PCB UL HOOK OP) operation using I/O commands and
adjust if necessary.
------------------------------
Code: 15040867
Display: UNLD MANI HOOK CLOSE TUP
Loader error: 15040867
Used by: QP132
Cause: The open and close operation of the manipulator hook on the unloading side was not completed
within the set amount of time.
Remedy: Check the open and close operation of the unloading side manipulator hook and the operation of
the open/close check sensors.
------------------------------
Code: 15040868
Display: UNLD MANI RISE TUP
Loader error: 15040868
Used by: QP132
Cause: The out-conveyor manipulator claw has not been raised in the given time.
Remedy: Check the PCB unload claw (X07A: PCB UL UPCHK) operation using I/O commands and adjust
if necessary.
------------------------------
Code: 15040869
Display: UNLD MANI DOWN TUP
Loader error: 15040869
Used by: QP132
第 1155 页
Cause: The ascend and descend operation of the manipulator on the unloading side was not completed
within the set amount of time.
Remedy: Check the ascend/descend operation of the manipulator on the unloading side and the
operation of the exit board transport upper-limit and lower-limit sensors.
------------------------------
Code: 1504086C
Display: UNLD MANI PCB PICKUP ERROR
Loader error: 1504086C
Used by: QP132
Cause: The unloading side manipulator failed to grab the board from the pallet during the pick operation.
Remedy: Make sure the board unclamp operation is working correctly. Check the operating status of the
exit transport board-check sensor. Make sure that the position at which the board is grabbed from the
pallet is correct.
------------------------------
Code: 1504086D
Display: UNLD MANI PCB PLACE ERROR
Loader error: 1504086D
Used by: QP132
Cause: The unloading side manipulator failed to place the board on the out-conveyor.
Remedy: Check the operating status of the exit transport board-check sensor and the out-conveyor
board-arrival-check sensor.
------------------------------
Code: 1504086F
Display: UNLD MANI PCB LOSE ERROR
Loader error: 1504086F
Used by: QP132
Cause: The board was lost during movement of the unloading side manipulator.
Remedy: Make sure that the board did not slip off during the manipulator movement. Check the
operating status of the exit transport board-check sensor.
------------------------------
Code: 15040872
Display: UNLD MANI TURN TUP
Loader error: 15040872
Used by: QP132
Cause: The rotation operation of the unloading side manipulator was not completed within the set
amount of time.
Remedy: Check the rotation operation of the unloading side manipulator and the operation of the exit
board transport rotation sensor.
------------------------------
Code: 15040873
Display: UNLD MANI BACK TUP
Loader error: 15040873
Used by: QP132
Cause: The return rotation operation of the unloading side manipulator was not completed within the set
amount of time.
Remedy: Check the return operation of the unloading side manipulator and the operation of the exit
board transport return sensor.
------------------------------
Code: 15040875
Display: Abolished.
Used by: QP122
第 1156 页