FUJI错误代码查询.pdf - 第1142页

Used by: XP143,XP243 Cause: OUT搬运轨道升降台的上升失败。 Remedy: OUT搬运轨道升降台未上升时，请确认通过OUT升降台的配管是否脱离 上升时，请确认以下传感器是否正常地动作。 <XP143> ·OUT搬运轨道升降台的上升确认传感器(X026:OutStLftUpChk) <XP243> ·OUT搬运轨道升降台的上升确认传感器１(X040:OutStLftUpChk1) ·O…

100%1 / 5282
Code: 1504043C
Display: panel conveyance error.
Used by: CP-732E, CP-742ME, CP-742E
Cause: The Out 1 panel arrival sensor or the Out 2 panel arrival sensor was off when the out-lifter was
being moved up and down for the out-conveyor panel check.
Remedy: Check the panel conveyance condition. If this error occurs even though panel s are being
conveyed properly, check to see if the sensor is operating properly.
------------------------------
Code: 1504043D
Display: Out-carrier clamping error.
Used by: CP-732E, CP-742ME, CP-742E
Cause: The clamp sensor operation is unstable at the out-carrier's advance limit side.
Remedy: Check the clamp sensor operation, and verify that the conveyor width is suitable for the panel in
question.
------------------------------
Code: 1504043E
Display: Panel unloading error
Used by: CP-752E
Cause: A panel was unloaded from the main-conveyor, however, the out-conveyor panel arrival sensor
(X0C7) did not detect the p
anel within the specified time limit.
Remedy: Check that the out-conveyor panel arrival sensor is functioning properly and confirm the panel
status.
------------------------------
Code: 1504043F
Display: Panel unloading error
Used by: CP-752E
Cause: An attempt was made to unload the panel to the next machine, however, the out-conveyor panel
arrival sensor (X0C7) did
not deactivate (OFF) within the specified time limit.
Remedy: Check that the out-conveyor panel arrival sensor is functioning properly and confirm the panel
status.
------------------------------
Code: 15040440
Display: Panel unloading error
Used by: CP-752E
Cause: This error occurs if panel exchange (send next panel) is set to take place when the out-conveyor
unload panel sensor (X
0CB) is deactivated.
Remedy: Check that the out-conveyor panel arrival sensor is working properly and confirm the panel
status.
------------------------------
Code: 15040441
Display: 向OUT搬运轨道的电路板到达传感器的电路板搬运失败。
Used by: XP143,XP243
Cause: 向OUT搬运轨道的电路板到达传感器的电路板搬运失败。
Remedy: 请确认电路板在搬运途中是否被钩住。
请确认OUT搬运轨道到达传感器(X00E:OutStArriveChk)是否正常地动作。
------------------------------
Code: 15040442
Display: OUT搬运轨道升降台的上升失败。
第 1141 页
Used by: XP143,XP243
Cause: OUT搬运轨道升降台的上升失败。
Remedy: OUT搬运轨道升降台未上升时，请确认通过OUT升降台的配管是否脱离
上升时，请确认以下传感器是否正常地动作。
<XP143>
·OUT搬运轨道升降台的上升确认传感器(X026:OutStLftUpChk)
<XP243>
·OUT搬运轨道升降台的上升确认传感器１(X040:OutStLftUpChk1)
·OUT搬运轨道升降台的上升确认传感器２(X041:OutStLftUpChk2)
------------------------------
Code: 15040443
Display: OUT搬运轨道的升降台下降失败。
Used by: XP143,XP243
Cause: OUT搬运轨道的升降台下降失败。
Remedy: OUT搬运轨道的升降台未下降时，请确认通过OUT搬运轨道的升降台的配管是否脱离。
下降时，请确认以下的传感器是否正常地动作。
<XP143>
·OUT搬运轨道升降台的上升确认传感器(X026:OutStLftUpChk)
<XP243>
·OUT搬运轨道升降台的上升确认传感器１(X040:OutStLftUpChk1)
·OUT搬运轨道升降台的上升确认传感器２(X041:OutStLftUpChk2)
------------------------------
Code: 15040444
Display: 电路板位置异常 送出侧
Used by: GPX
Cause: 在送出侧搬运轨道无法搬运的位置上存在电路板。
Remedy: 请除去电路板。
<img src="$LKEY_ERRIMG_MC$/EI0009.bmp">
------------------------------
Code: 15040445
Display: 载出搬运轨道有电路板错误
Used by: NXTP
Cause: 因为在载出搬运轨道上有电路板，所以不进入到下一步的处理。
Remedy: 请清除电路板。
<img src="$LKEY_ERRIMG_MC$/15040445.PNG">
------------------------------
Code: 15040446
Display:
Used by:
Cause:
Remedy:
------------------------------
Code: 15040447
Display:
Used by:
Cause:
Remedy:
------------------------------
Code: 15040448
Display:
Used by:
第 1142 页
Cause:
Remedy:
------------------------------
Code: 15040449
Display:
Used by:
Cause:
Remedy:
------------------------------
Code: 1504044A
Display:
Used by:
Cause:
Remedy:
------------------------------
Code: 1504044B
Display:
Used by:
Cause:
Remedy:
------------------------------
Code: 1504044C
Display:
Used by:
Cause:
Remedy:
------------------------------
Code: 1504044D
Display:
Used by:
Cause:
Remedy:
------------------------------
Code: 15040500
Display: Abolished.
Used by: QP122
Cause: Abolished.
Remedy: Abolished.
------------------------------
Code: 15040501
Display: Abolished.
Used by: QP122
Cause: Abolished.
Remedy: Abolished.
------------------------------
Code: 15040502
Display: Abolished.
Used by: QP122
Cause: Abolished.
Remedy: Abolished.
------------------------------
第 1143 页