FUJI错误代码查询.pdf - 第298页
Remedy: If this problem occurs frequently, check the stocker ROM version and the machine version, and contact Fuji. CPU unit alarm. Cancel the alarm. Perform the I/O command again. ------------------------------ Code: 12…
contact Fuji. It is probably related to nozzles or something like that. Re-execute the command.
------------------------------
Code: 12020511
Display:
Used by:
Cause: Framing error. The stop bit could not be found while the upper system link was receiving a
command.
Remedy: If this problem occurs frequently, check the stocker ROM version and the machine version, and
contact Fuji. It is probably related to nozzles or something like that. Re-execute the command.
------------------------------
Code: 12020512
Display:
Used by:
Cause: Overrun error. Another command was received while the upper system link was processing the
current command. If this problem occurs frequently, check the stocker ROM version and the machine
version, and contact Fuji. Lower the baud rate and retransmit the command.
Remedy:
------------------------------
Code: 12020513
Display:
Used by:
Cause: FCS error. The FCS made a calculation mistake or the error was related to the nozzles, etc.
Remedy: If this problem occurs frequently, check the stocker ROM version and the machine version, and
contact Fuji. Check the FCS calculation method. If the error was caused by noise, retransmit it.
------------------------------
Code: 12020514
Display:
Used by:
Cause: The command format was incorrect.
Remedy: If this problem occurs frequently, check the stocker ROM version and the machine version, and
contact Fuji. Check the format and retransmit.
------------------------------
Code: 12020515
Display:
Used by:
Cause: The READ/WRITE areas are incorrectly set.
Remedy: If this problem occurs frequently, check the stocker ROM version and the machine version, and
contact Fuji. Check that the areas are correct and retransmit.
------------------------------
Code: 12020516
Display:
Used by:
Cause: The relevant step command was not there at the relevant step.
Remedy: If this problem occurs frequently, check the stocker ROM version and the machine version, and
contact Fuji. Check the step and the command.
------------------------------
Code: 12020519
Display:
Used by:
Cause: Alarm cannot be cancelled, memory error, EEP-ROM overwrite impossible, I/O command could
not be performed.
第 297 页
Remedy: If this problem occurs frequently, check the stocker ROM version and the machine version, and
contact Fuji. CPU unit alarm. Cancel the alarm. Perform the I/O command again.
------------------------------
Code: 12020520
Display:
Used by:
Cause: Remote not recognized, double usage of channel.
Remedy: If this problem occurs frequently, check the stocker ROM version and the machine version, and
contact Fuji. Check that the remote I/O channels are set correctly.
------------------------------
Code: 12020521
Display:
Used by:
Cause: The stocker sequencer could not operate due to an alarm in the CPU. Turn off the stocker power
and reboot.
Remedy:
------------------------------
Code: 12020522
Display:
Used by:
Cause: The appropriate memory unit does not exist.
Remedy: Turn off the stocker sequencer CPU power, and then check the memory.
------------------------------
Code: 12020523
Display:
Used by:
Cause: The memory is protected.
Remedy: Turn off the protect memory switch at the stocker.
------------------------------
Code: 120205A0
Display:
Used by:
Cause: A parity error occurred in the transmit data, causing an abort error.
Remedy: This is probably caused by noise. If this problem occurs frequently, check the stocker ROM
version and the machine version, and contact Fuji.
------------------------------
Code: 120205A1
Display:
Used by:
Cause: A framing error occurred in the transmit data, causing an abort error.
Remedy: This is probably caused by noise. If this problem occurs frequently, check the stocker ROM
version and the machine version, and contact Fuji.
------------------------------
Code: 120205A2
Display:
Used by:
Cause: An overrun error occurred in the transmit data, causing an abort error.
Remedy: This is probably caused by noise. If this problem occurs frequently, check the stocker ROM
version and the machine version, and contact Fuji.
------------------------------
Code: 120205A3
第 298 页
Display:
Used by:
Cause: An FCS error occurred in the transmit data, causing an abort error.
Remedy: This is probably caused by noise. If this problem occurs frequently, check the stocker ROM
version and the machine version, and contact Fuji.
------------------------------
Code: 120205A4
Display:
Used by:
Cause: A format error occurred in the transmit data, causing an abort error.
Remedy: This is probably caused by noise. If this problem occurs frequently, check the stocker ROM
version and the machine version, and contact Fuji.
------------------------------
Code: 120205A5
Display:
Used by:
Cause: An address error occurred in the transmit data, causing an abort error.
Remedy: This is probably caused by noise. If this problem occurs frequently, check the stocker ROM
version and the machine version, and contact Fuji.
------------------------------
Code: 120205A8
Display:
Used by:
Cause: A maximum frame length error occurred in the transmit data, causing an abort error.
Remedy: This is probably caused by noise. If this problem occurs frequently, check the stocker ROM
version and the machine version, and contact Fuji.
------------------------------
Code: 120205B0
Display:
Used by:
Cause: The program area is not 16 kilobytes so execution cannot be carried out.
Remedy: If this problem occurs frequently, check the stocker ROM version and the machine version, and
contact Fuji. The extension DM can only be used when the program area is 16 kilobytes.
------------------------------
Code: 12020601
Display: Abolished
Used by: QP122
Cause: Abolished
Remedy: Abolished
------------------------------
Code: 12020602
Display: Abolished
Used by: QP122
Cause: Abolished
Remedy: Abolished
------------------------------
Code: 12020603
Display: Abolished
Used by: QP122
Cause: Abolished
Remedy: Abolished
第 299 页