FUJI错误代码查询.pdf - 第122页

Used by: GSP5,GP2,GP3,GPX,NXTP Cause: 印刷模式在范围之外。 Remedy: 请确认生产程序的Ｓｑｇ＿ａｃｔｉｏｎ。范围是0～2。 0:单程 1:往复 2:单程一定方向 可以设定的连续往复印刷设定为，0：单程印刷，１：往复印刷。（ＧＰＸ,NXTP） ------------------------------ Code: 1101E00C Display: 与编码相同 Used by: GSP5,GP…

100%1 / 5282
　　　　　ＧＰ６　　　　　　　５０mm～３５６mm
　　　　　ＧＰX　　　　　　　５０mm～３５６（３６０）mm　　　　　NXTP　　　　　　　
４８mm～１７０mm
------------------------------
Code: 1101E005
Display:
Used by: GSP5,GP2,GP3
Cause: The pitch between the reference pin and the follow-up pin is out of range.
Remedy: Check Pin_pitch in the production program. The range is from 0.00 to 650.00 mm.
------------------------------
Code: 1101E006
Display:
Used by: GSP5,GP2,GP3,GP551,GP6
Cause: The production schedule is out of range.
Remedy: Check Production_qty in the production program. The range is from 0 to 65000.
------------------------------
Code: 1101E007
Display: 与编码相同
Used by: GSP5,GP2,GP3,GP551,GP6,GPX,NXTP
Cause: Squeegee speed (right to left) is out of range.
The printing speed (front to back) is out of range. 刮刀速度（从前到后）超出范围。（ＧＰＸ,NXTP）
Remedy: Check Sqg_speed_RL in the production program. The range is 0 to 145 mm/sec.
Possible printing speed range:
First and last sequence: 0 to 300 mm/s
Middle sequences: 1 to 300 mm/s
可以设定的刮刀速度为，
·最初，最终顺序：０～３００ｍｍ／ｓ
·中间顺序：１～３００ｍｍ／ｓ。（ＧＰＸ）
------------------------------
Code: 1101E008
Display: 与编码相同
Used by: GSP5,GP2,GP3,GPX,NXTP
Cause: 刮刀速度（从左到右）在范围之外。 刮刀速度（从后到前）超出范围。（ＧＰＸ,NXTP）
Remedy: 请确认生产程序的Ｓｑｇ＿ｓｐｅｅｄ＿ＬＲ。范围是０～１４５[mm/sec]。 可以设定的刮刀速度为，
·最初，最终顺序：０～３００ｍｍ／ｓ
·中间顺序：１～３００ｍｍ／ｓ。（ＧＰＸ）
------------------------------
Code: 1101E009
Display:
Used by: GSP5,GP2,GP3
Cause: The separation distance from the head center to squeegee L is out of range.
Remedy: Check Sqg_ofst_L in the production program. The range is 13 to 100 mm.
------------------------------
Code: 1101E00A
Display:
Used by: GSP5,GP2,GP3
Cause: The separation distance from the head center to squeegee R is out of range.
Remedy: Check Sqg_ofst_R in the production program. The range is 13 to 100 mm.
------------------------------
Code: 1101E00B
Display: 与编码相同
第 121 页
Used by: GSP5,GP2,GP3,GPX,NXTP
Cause: 印刷模式在范围之外。
Remedy: 请确认生产程序的Ｓｑｇ＿ａｃｔｉｏｎ。范围是0～2。 0:单程　1:往复　2:单程一定方向
可以设定的连续往复印刷设定为，0：单程印刷，１：往复印刷。（ＧＰＸ,NXTP）
------------------------------
Code: 1101E00C
Display: 与编码相同
Used by: GSP5,GPX,NXTP
Cause: 印刷压力（Ｌ１）在范围之外。
印刷压力（从前到后）超出范围。（ＧＰＸ,NXTP）
Remedy: 请确认生产程序的Ｐｒｉｎｔ＿ｐｒｅｓ＿ｓｑｇＬ。范围是１～１００[%]。
可以设定的印刷压力为１０～２００Ｎ。（ＧＰＸ）
------------------------------
Code: 1101E00D
Display: 与编码相同
Used by: GSP5,GPX,NXTP
Cause: 印刷压力（Ｒ１）在范围之外。 印刷压力（从后到前）超出范围。（ＧＰＸ,NXTP）
Remedy: 请确认生产程序的Ｐｒｉｎｔ＿ｐｒｅｓ＿ｓｑｇＲ。范围是１～１００[%]。 可以设定的印刷压力为
１０～２００Ｎ。（ＧＰＸ）
------------------------------
Code: 1101E00E
Display:
Used by: GSP5
Cause: The squeegee size is out of range.
Remedy: Check Squeegee_size in the production program. A setting of 0 indicates L, 1 indicates M and 2
indicates S.
------------------------------
Code: 1101E00F
Display: 1101E00F
Used by: GSP5,GP2,GP3,GP551,GP6
Cause: Side clamp pressure is out of range.
Remedy: Check Clamp_pressure in the production program. The range is from 0 to 10000 g. The range
for the GSP5 is from 0 to 5000 g.
------------------------------
Code: 1101E010
Display: 与编码相同
Used by: GSP5,GP2,GP3,GPX,NXTP
Cause: 真空模式在范围之外。
Remedy: 请确认生产程序的Ｖａｃｕｕｍ＿ｆｌａｇ。
范围是0～2。0:不使用　1:全部使用　2:印刷中ｏｆｆ
请确认在ＦｕｊｉＦｌｅｘａ上设定的电路板真空设定。范围为，０：电路板真空无，１：电路板真空有。（GPX）
------------------------------
Code: 1101E011
Display: 与编码相同
Used by: GSP5,GPX,NXTP
Cause: 非接触式印刷时的电路板与网板的距离在范围之外。
Remedy: 请确认生产程序的ｏｆｆｃｏｎｔａｃｔ＿ｄｉｓｔａｎｃｅ。范围是０.００～３.００[mm]。
请确认在ＦｕｊｉＦｌｅｘａ上设定的非接触量。范围为，从－１到１ｍｍ。（ＧＰＸ,NXTP）
------------------------------
Code: 1101E012
Display:
第 122 页
Used by: GSP5
Cause: Edge mode is out of range.
Remedy: Check Clamp_mode in the production program. A setting of 0 indicates mark reference, 1
indicates external reference and 2 indicates check mode.
------------------------------
Code: 1101E013
Display:
Used by: GSP5
Cause: When edge mode is check mode, the external reference is out of range.
Remedy: Check Edge_revise_limit in the production program. The range is from 0.01 to 1.00 mm.
------------------------------
Code: 1101E014
Display:
Used by: GSP5
Cause: The elongation limit is out of range.
Remedy: Check Elongation_limit in the production program. The range is from 0.00 to 10.00%.
------------------------------
Code: 1101E015
Display: 与编码相同
Used by: GSP5,GP2,GP3,GPX,NXTP
Cause: 绝对修正值X在范围之外。
Remedy: 请确认生产程序的Ａｂｓｏｌｕｔｅ＿ｏｆｓｔ．X。范围是-１.２８～１.２７[mm]。
请确认在ＦｕｊｉＦｌｅｘａ上设定的绝对偏移量X。范围为－１．２７～１．２８ｍｍ。（ＧＰＸ,NXTP）
------------------------------
Code: 1101E016
Display: 与编码相同
Used by: GSP5,GP2,GP3,GPX,NXTP
Cause: 绝对修正值Y在范围之外。
Remedy: 请确认生产程序的Ａｂｓｏｌｕｔｅ＿ｏｆｓｔ．Y。范围是-１２８～１.２７[mm]。
请确认在ＦｕｊｉＦｌｅｘａ上设定的绝对偏移量Ｙ。范围为－１．２７～１．２８ｍｍ。（ＧＰＸ,NXTP）
------------------------------
Code: 1101E017
Display:
Used by: GSP5
Cause: The center of compensation in the X-axis is out of range.
Remedy: Check Screen_locate_orgn_x in the production program. The range is -457.00 to 457.00 mm.
------------------------------
Code: 1101E018
Display:
Used by: GSP5
Cause: The center of compensation in the Y-axis is out of range.
Remedy: Check Screen_locate_orgn_y in the production program. The range is -356.00 to 356.00 mm.
------------------------------
Code: 1101E019
Display: 与编码相同
Used by: GSP5,GPX
Cause: The snapoff speed is out of range.
Remedy: Check Board_detach_speed in the production program. The range is from 0.1 to 1.0 mm/sec.
Check the detach speed for the first sequence in Fuji Flexa. Possible detach speed range: 0.1 to 40 mm/s
请确认在ＦｕｊｉＦｌｅｘａ上设定的第１顺序的离板速度。范围为，从０．１到４０[mm/sec]。（ＧＰＸ）
------------------------------
第 123 页