FUJI错误代码查询.pdf - 第1902页
------------------------------ Code: 21006079 Display: Special condition file open error Used by: Cause: The special condition file could not be opened. Remedy: Check the specified special condition file. ---------------…
Remedy: This is a warning. It is not an error message. Processing continues.
------------------------------
Code: 21006071
Display: file already exists
Used by:
Cause: The file to be created already exists.
Remedy: Check the file process.
------------------------------
Code: 21006072
Display: Illegal sub type (FIP1/FIP2)
Used by:
Cause: The machine sub-type name is illegal.
Remedy: Check the machine sub-type (specified line descriptor, Part data, etc.).
------------------------------
Code: 21006073
Display: GSP2 sequence file create error
Used by:
Cause: The GSP sequence file could not be created.
Remedy: Check the source program.
------------------------------
Code: 21006074
Display: GSP2 sequence file open error
Used by:
Cause: The GSP sequence file could not be opened.
Remedy: Check that the file exists, and check that the write protect setting is not on. Also, check that
there is enough memory remaining in the hard disk.
------------------------------
Code: 21006075
Display: GSP2 sequence file read error
Used by:
Cause: The GSP sequence file cannot be read.
Remedy: Delete the separator file and re-execute the function.
------------------------------
Code: 21006076
Display: GSP2 sequence file write error
Used by:
Cause: The GSP2 sequence file cannot be written to.
Remedy: Check that the file exists, and check that the write protect setting is not on. Also, check that the
hard disk has sufficient memory.
------------------------------
Code: 21006077
Display: special sequence ('F','M') are wanting in source file.
Used by:
Cause: The special sequence (F or M) is missing from the source program.
Remedy: Append the missing sequences to the source program.
------------------------------
Code: 21006078
Display: Special condition file not found
Used by:
Cause: The specified special condition file does not exist.
Remedy: Check the special condition file.
第 1901 页
------------------------------
Code: 21006079
Display: Special condition file open error
Used by:
Cause: The special condition file could not be opened.
Remedy: Check the specified special condition file.
------------------------------
Code: 2100607A
Display: Special condition file read error.
Used by:
Cause: The special condition file could not be read.
Remedy: Check the specified special condition file.
------------------------------
Code: 2100607B
Display: Input special condition file isn't special codition file_typ
Used by:
Cause: The specified file is not a special condition file.
Remedy: Check the special condition files.
------------------------------
Code: 2100607C
Display: /h0/USER/ATP/Sep_parameter isn't Parameter status file_type
Used by:
Cause: The specified file is not the special conditions file type.
Remedy: Check the special condition file.
------------------------------
Code: 2100607D
Display: rewrite switch get error
Used by:
Cause: The rewrite switch could not read.
Remedy: Re-install the automatic programming software.
------------------------------
Code: 2100607E
Display: Input Off-line file isn't Off-line file_type
Used by:
Cause: The specified file is not part of the line descriptor.
Remedy: Check the line descriptor.
------------------------------
Code: 2100607F
Display: Input Pt-file isn't Pt-file_type
Used by:
Cause: The specified file is not a PT file.
Remedy: Check the PT files.
------------------------------
Code: 21006080
Display: Pt-file (***) isn't Pt-file_type
Used by:
Cause: The specified file is not a PT file.
Remedy: Check the PT files.
------------------------------
Code: 21006081
Display: Input Source program isn't Source_program_type
第 1902 页
Used by:
Cause: The specified file is not a source program.
Remedy: Check the source program.
------------------------------
Code: 21006082
Display: Manual Line Balancer Std_file create error
Used by:
Cause: The preparation file for the separator's manual line balancer could not be created.
Remedy: Check that the write protect setting is not on. Also, check that the hard disk has sufficient
memory.
------------------------------
Code: 21006083
Display: Manual Line Balancer Std_file write error
Used by:
Cause: The preparation file for the separator's manual line balancer could not be written to.
Remedy: Check that the write protect setting is not on. Also, check that the hard disk has sufficient
memory.
------------------------------
Code: 21006084
Display: Manual Line Balancer fork error
Used by:
Cause: The manual line balancer could not be started.
Remedy: Re-execute the function. If it still doesn't work, re-install the software.
------------------------------
Code: 21006085
Display: Manual Line Balancer Std_file open error
Used by:
Cause: The separator's preparation file used by the manual line balancer could not be opened.
Remedy: Check the Std file.
------------------------------
Code: 21006086
Display: Manual Line Balancer Std_file read error
Used by:
Cause: The separator's preparation file used by the manual line balancer could not be read.
Remedy: Check the file.
------------------------------
Code: 21006087
Display: Part_data create error on ram_disk
Used by:
Cause: The necessary Part data could not be created on the RAM disk.
Remedy: Check that the RAM disk has sufficient memory. If it doesn't, re-boot MCS.
------------------------------
Code: 21006088
Display: Part_data write error on ram_disk
Used by:
Cause: The Part data could not be written to the RAM disk.
Remedy: Check that the RAM disk has sufficient memory. If it doesn't, re-boot MCS.
------------------------------
Code: 21006089
Display: Output filename is to long
Used by:
第 1903 页