FUJI错误代码查询.pdf - 第2253页

verification is executed within a set amount of time. ------------------------------ Code: 51??4040 Display: Remote command deletion has been cancelled. Used by: Cause: While waiting for a response with regards to the de…

Display: A board type was reported in the middle of changeover.

Used by:

Cause: Processing was cancelled because the next board type was reported during changeover.

Remedy:

------------------------------

Code: 51??4033

Display: Changeover has been executed even though the board type has not been reported.

Used by:

Cause: The changeover response has been executed even though the board type has not been reported.

Remedy: Get a verification of the board type report for a second time.

------------------------------

Code: 51??4034

Display: The machine has already timed out.

Used by:

Cause: A command to enter changeover has been executed for a machine that has already timed out.

Remedy: After executing board type verification, it is necessary that the command to enter changeover is

executed within a set amount of time.

------------------------------

Code: 51??4035

Display: Board type verification has already been completed.

Used by:

Cause: Board type verification has been executed using the same changeover ID for a machine that has

already executed the board type verification.

Remedy: Check the changeover ID value.

------------------------------

Code: 51??4036

Display: The command to enter changeover has been executed multiple times.

Used by:

Cause: The command to enter changeover has been executed multiple times on the same machine using

the same changeover ID.

Remedy: Check the changeover ID value.

------------------------------

Code: 51??4037

Display: The verification code value of the board type verification is incorrect.

Used by:

Cause: The verification code value of the board type verification has been specified as some value outside

the range of 0 - 4.

Remedy: Check the verification code value of the board type verification

------------------------------

Code: 51??4038

Display: The changeover ID value is incorrect.

Used by:

Cause: The changeover ID value has been specified as some value outside the range of 0 - FFFF.

Remedy: Check the changeover ID value.

------------------------------

Code: 51??4039

Display: The machine has already timed out.

Used by:

Cause: A command to execute board type verification has been executed for a machine that has already

timed out.

Remedy: After reporting the board type, it is necessary that the command to execute board type

第 2252 页

verification is executed within a set amount of time.

------------------------------

Code: 51??4040

Display: Remote command deletion has been cancelled.

Used by:

Cause: While waiting for a response with regards to the deletion of the targeted remote command, the

completion of the command was reported from the machine prior to deletion.

Remedy:

------------------------------

Code: 51??4041

Display: Cell status has not been decided.

Used by:

Cause: Publication of a notice has been executed for a machine which has an undecided cell status.

Remedy: Perform a cell status request.

------------------------------

Code: 51??5001

Display: Undefined item.

Used by:

Cause: The reported item is undefined and has been assigned a default value. In the case of multiple

item data, the item names have been omitted from the item definition line.

Remedy: If it is necessary to set the reported item to something other than its default value, enter the

value.

------------------------------

Code: 51??5002

Display: Multiply defined item.

Used by:

Cause: The reported item is multiply defined. An item name has been multiply defined at the item

definition line in multiple item data.

Remedy: Generally this is caused by an error in the definition of one of the item names. Check the names

and values of the reported items.

------------------------------

Code: 51??5003

Display: Unknown item.

Used by:

Cause: The item which was entered is not known.

Remedy: This error is generally caused by the incorrect entry of an item's name. Check the name of the

reported item.

------------------------------

Code: 51??5004

Display: Additional unknown items.

Used by:

Cause: There are further unknown items but they cannot be displayed.

Remedy: There are too many unknown item names. Check the content of the file. The definition for the

machine-type name may be incorrect.

------------------------------

Code: 51??5005

Display: Values omitted from multiple item data.

Used by:

Cause: In multiple item data, the item name is defined at the item definition line but data is omitted from

the data lines.

Remedy: Check the data line settings.

第 2253 页

------------------------------

Code: 51??5006

Display: Same line multiply defined in multiple item data.

Used by:

Cause: In multiple item data, a line with the same number has been multiply defined. When

downloading, the first of the data lines is taken as being the valid data line.

Remedy: Check the data line settings.

------------------------------

Code: 51??5010

Display: Values for size defining items are incorrect or they have been omitted.

Used by:

Cause: The entries for the items "DEV_NUM", "EL_NUM" or "TRAY_NUM" in "UNIT", "PROGRAM" -

"BLOCK", "HEADER" for SMD3 compatible machines have either been omitted or they are incorrect.

Correct values are reported together with the item names. Unnecessary items are not reported to the

applicable machine. When downloading, the program size is calculated using the registered values.

However, if values which exceed the maximum permissible are entered, they are changed to the maximum

and the program size is calculated.

Remedy: Check the entries for the relevant items in "UNIT", "PROGRAM" - "BLOCK", "HEADER-" in the

production program.

------------------------------

Code: 51??5100

Display: Meaningless unit.

Used by:

Cause: Although this entry is not correct it is ignored when the program is downloaded. This error may

occur in the following cases. A unit name other than "UNIT", "MARK" or "UNIT", "NOZZLE" is entered prior

to "UNIT", "PROGRAM". A unit name other than "UNIT", "PARTS" is entered prior to "UNIT", "PROGRAM".

Remedy: Check the entries for the production program.

------------------------------

Code: 51??5101

Display: Unused "UNIT", "PARTS".

Used by:

Cause: "UNIT", "PARTS" is entered in the production program but it is not used and not referred to in the

device line.

Remedy: When the number of entries for unused "UNIT", "PARTS" is high, an error may occur when

downloading.

------------------------------

Code: 51??5110

Display: Block description is omitted.

Used by:

Cause: There is no "BLOCK" line for the block being reported. When downloading, the data for the

applicable block takes its default values.

Remedy: Check the block settings. If necessary, input the "BLOCK" line.

------------------------------

Code: 51??5111

Display: Block is multiply defined.

Used by:

Cause: The "BLOCK" line for the block being reported is multiply defined.

Remedy: Check the block settings.

------------------------------

Code: 51??5112

Display: Unknown block.

第 2254 页