FUJI错误代码查询.pdf - 第713页
Cause: Remedy: ------------------------------ Code: 1206B00A Display: Used by: Cause: Remedy: ------------------------------ Code: 1206B00B Display: Used by: Cause: Remedy: ------------------------------ Code: 1206B00C D…
Code: 1206B001
Display:
Used by:
Cause:
Remedy:
------------------------------
Code: 1206B002
Display:
Used by:
Cause:
Remedy:
------------------------------
Code: 1206B003
Display:
Used by:
Cause:
Remedy:
------------------------------
Code: 1206B004
Display:
Used by:
Cause:
Remedy:
------------------------------
Code: 1206B005
Display:
Used by:
Cause:
Remedy:
------------------------------
Code: 1206B006
Display:
Used by:
Cause:
Remedy:
------------------------------
Code: 1206B007
Display:
Used by:
Cause:
Remedy:
------------------------------
Code: 1206B008
Display:
Used by:
Cause:
Remedy:
------------------------------
Code: 1206B009
Display:
Used by:
第 712 页
Cause:
Remedy:
------------------------------
Code: 1206B00A
Display:
Used by:
Cause:
Remedy:
------------------------------
Code: 1206B00B
Display:
Used by:
Cause:
Remedy:
------------------------------
Code: 1206B00C
Display:
Used by:
Cause:
Remedy:
------------------------------
Code: 1206B00D
Display:
Used by:
Cause:
Remedy:
------------------------------
Code: 1207?E49
Display: "ICM (PMC?,SCU?) Error Code:********" (QP2)
"Measurement completion command processing error" (QP2)
Coplanarity error(NP2,QP3)
Used by: QP242,NP2,QP3
Cause: The light beam of the LLL may not be interrupted during processing. ? is the module number.
"****" is the error code.(QP2)
Measurement completion command processing error.The laser beam may not have been blocked
during processing.(NP2,QP3)
Remedy: Move the X measurement position a little closer to the LLL.
------------------------------
Code: 12070?01
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"Command Error" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: An unsupported command has been received. The command in question may not be available
due to a firmware malfunction, or there may be a error in the command format.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Press the RESET button to clear the error, or restart the machine. If the problem occurs again,
use a reset-start to transmit the control software to the PMCs. If the problem is recurring, issues such as
a faulty production program or PMC control board may be the cause.
------------------------------
第 713 页
Code: 12070?02
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"Wrong Module Number" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: The module number is incorrect.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Press the RESET button to clear the error, or restart the machine. If the problem occurs again,
use a reset-start to transmit the control software to the PMCs. If the problem is recurring, issues such as
a faulty production program or PMC control board may be the cause.
------------------------------
Code: 12070?03
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"In Auto Mode" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: The command cannot be executed because the machine is operating in automatic mode.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Press the RESET button to clear the error, or restart the machine. If the problem occurs again,
use a reset-start to transmit the control software to the PMCs. If the problem is recurring, issues such as
a faulty PMC control board may be the cause.
------------------------------
Code: 12070?04
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"Servo is ON" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: The command cannot be executed because the servo has not been turned off.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Press the RESET button to clear the error, or restart the machine. If the problem occurs again,
use a reset-start to transmit the control software to the PMCs. If the problem is recurring, issues such as
a faulty PMC control board may be the cause.
------------------------------
Code: 12070?05
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"Operating in ST" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: The command cannot be executed because the machine is being operated from a handy terminal.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Stop handy terminal operation, or re-execute the command after handy terminal processing is
completed.
------------------------------
Code: 12070?06
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"PMC is Busy" (QP2)
PM?? ERROR Code:******** (QP132)
第 714 页