FUJI错误代码查询.pdf - 第2060页

Code: 2100C231 Display: Known Module Used by: Cause: A system error occurred. Remedy: Reset MCS. ------------------------------ Code: 2100C232 Display: Bad module CRC Used by: Cause: The executing module in the specified…

100%1 / 5282
Remedy: Reset MCS.
------------------------------
Code: 2100C221
Display: Module not found
Used by:
Cause: The specified process to be executed was not found.
Remedy: Check thin MCS/2 was completely installed properly. Use the program module test function for
the root of the problem.
------------------------------
Code: 2100C223
Display: Deleting stack memory
Used by:
Cause: A system error occurred.
Remedy: Reset MCS.
------------------------------
Code: 2100C224
Display: Illegal process ID
Used by:
Cause: A system error occurred.
Remedy: Reset MCS.
------------------------------
Code: 2100C225
Display: Bad IRQ parameter
Used by:
Cause: A system error occurred.
Remedy: Reset MCS.
------------------------------
Code: 2100C226
Display: No children
Used by:
Cause: A system error occurred.
Remedy: Reset MCS.
------------------------------
Code: 2100C228
Display: The process has been aborted.
Used by:
Cause: A system error occurred.
Remedy: Reset MCS.
------------------------------
Code: 2100C229
Display: Too many active processes
Used by:
Cause: A system error occurred.
Remedy: Reset MCS.
------------------------------
Code: 2100C230
Display: Illegal Fork Parameter
Used by:
Cause: A system error occurred.
Remedy: Reset MCS.
------------------------------
第 2059 页
Code: 2100C231
Display: Known Module
Used by:
Cause: A system error occurred.
Remedy: Reset MCS.
------------------------------
Code: 2100C232
Display: Bad module CRC
Used by:
Cause: The executing module in the specified process cannot be found.
Remedy: Check thin MCS/2 has been properly installed. Perform module tests to try and find the root of
the problem.
------------------------------
Code: 2100C234
Display: Non Existing Module
Used by:
Cause: The executing module in the specified process cannot be found.
Remedy: Check that the MCS/2 has been properly installed. Perform module tests to try and find the
root of the problem.
------------------------------
Code: 2100C235
Display: Bad Name
Used by:
Cause: A system error occurred.
Remedy: Reset MCS.
------------------------------
Code: 2100C236
Display: Bad module header parity
Used by:
Cause: The executing module in the specified process cannot be found.
Remedy: Check that the MCS/2 has been properly installed. Perform module tests to try and find the
root of the problem.
------------------------------
Code: 2100C237
Display: No RAM Available
Used by:
Cause: RAM memory to use the file cannot be saved.
Remedy: Allocate more memory.
------------------------------
Code: 2100C238
Display: The directory is not empty
Used by:
Cause: The directory was not emptied completely after an attempt was made to empty it.
Remedy: Except in cases where this was attempted by direct command, contact Fuji.
------------------------------
Code: 2100C239
Display: No available task number
Used by:
Cause: A system error occurred.
Remedy: Reset MCS.
------------------------------
第 2060 页
Code: 2100C240
Display: Illegal unit (drive) number.
Used by:
Cause: An illegal device was specified.
Remedy: Check the device.
------------------------------
Code: 2100C241
Display: Bad disk sector number
Used by:
Cause: A system error occurred.
Remedy: Change the disk, or format it and re-execute the function.
------------------------------
Code: 2100C242
Display: Media is write protected
Used by:
Cause: The specified device cannot be written to.
Remedy: If using a floppy disk, check the write protection tab on the disk. If not using a floppy, contact
Fuji.
------------------------------
Code: 2100C243
Display: Bad check sum
Used by:
Cause: A system error occurred.
Remedy: Check that the MCS/2 software was installed properly. Perform tests on the program module to
determine the roots of the problem. Check the file.
------------------------------
Code: 2100C244
Display: Read error
Used by:
Cause: The specified file could not be read.
Remedy: Check that the MCS software was installed properly. Perform tests on the program module to
determine the cause of the problem. Check the file.
------------------------------
Code: 2100C245
Display: Write error
Used by:
Cause: The specified file could not be written into.
Remedy: Check that the MCS software was properly installed. Perform tests on the program module to
determine the cause of the problem. Check the file.
------------------------------
Code: 2100C246
Display: Device not ready
Used by:
Cause: The specified device (floppy disk drive or printer) is not in the operating status.
Remedy: Make sure that the floppy disk drive lock lever is fully closed or that the printer is turned on and
set on-line.
------------------------------
Code: 2100C247
Display: Seek error
Used by:
Cause: A system error occurred.
第 2061 页