FUJI错误代码查询.pdf - 第1864页

file. Use the following commands: ":/h0/cmds/del /h0/work_0/err/err_file". ------------------------------ Code: 21003A06 Display: can't read error file Used by: Cause: The error file could not be read. Rem…

100%1 / 5282
Used by:
Cause: There was a system error.
Remedy: Re-boot MCS.
------------------------------
Code: 21002201
Display: Parameter syntax error
Used by:
Cause: The startup parameters were wrong.
Remedy: Re-install the system.
------------------------------
Code: 21002202
Display: Environment File open error
Used by:
Cause: Unable to open the ID file.
Remedy: After entering ":/h0/cmds/del/ h0/mcs2/.sys/idt" from the UCI menu, input ":idg -a".
------------------------------
Code: 21002203
Display: Instance_ID data error (ERROR)
Used by:
Cause: There was no ID number.
Remedy: Input ":idg -a" from the UCI menu.
------------------------------
Code: 21002204
Display: File not found.
Used by:
Cause: The file was not found.
Remedy: Check the input filename.
------------------------------
Code: 21002205
Display: Instance_ID data error (WARNING)
Used by:
Cause: The ID number could not be found.
Remedy: Input ":idg -a" at the UCI menu.
------------------------------
Code: 21003A03
Display: can't get err_file event
Used by:
Cause: A console event could not be set.
Remedy: Start up from the UCI menu.
------------------------------
Code: 21003A04
Display: can't find error file
Used by:
Cause: The error file does not exist.
Remedy: There was no error. If an error occurs an error file will be automatically created.
------------------------------
Code: 21003A05
Display: can't open error file
Used by:
Cause: The error file could not be opened.
Remedy: The file can be destroyed. Execute the next command from the UCI menu, and delete the error
第 1863 页
file. Use the following commands: ":/h0/cmds/del /h0/work_0/err/err_file".
------------------------------
Code: 21003A06
Display: can't read error file
Used by:
Cause: The error file could not be read.
Remedy: The file can be destroyed. Execute the next command from the UCI menu, and delete the error
file. Use the following commands: ":/h0/cmds/del /h0/work_0/err/err_file".
------------------------------
Code: 21003A07
Display: 21003A07
Used by:
Cause: There is no error data in the error file.
Remedy: None.
------------------------------
Code: 21003A08
Display: can't delete temp_file (delete)
Used by:
Cause: A temporary file could not be deleted.
Remedy: Re-boot MCS.
------------------------------
Code: 21003A09
Display: can't allocate memory
Used by:
Cause: Not possible to allocate sufficient memory area.
Remedy: If something is being executed in the background, wait until this is finished. If not, re-boot
MCS.
------------------------------
Code: 21003A0A
Display: can't open err_file (delete)
line disclipta open error
Used by:
Cause: The error file could not be opened.
Remedy: The file can be destroyed. Execute the next command from the UCI menu, and delete the error
file. Use the following commands: ":/h0/cmds/del /h0/work_0/err/err_file".
------------------------------
Code: 21003A0B
Display: can't read err_file (delete)
Used by:
Cause: The error file could not be read.
Remedy: The file can be destroyed. Execute the next command from the UCI menu, and delete the error
file. Use the following commands: ":/h0/cmds/del /h0/work_0/err/err_file".
------------------------------
Code: 21003A0C
Display: can't get err_file event (delete)
Used by:
Cause: An error event could not be set.
Remedy: Re-boot MCS.
------------------------------
Code: 21003A0D
Display: can't delete err_file (delete)
第 1864 页
Used by:
Cause: The error file could not be deleted.
Remedy: The file can be destroyed. Execute the next command from the UCI menu, and delete the error
file. Use the following commands: ":/h0/cmds/del /h0/work_0/err/err_file".
------------------------------
Code: 21003A0E
Display: can't open temp_file (delete)
Used by:
Cause: The temporary file could not be deleted.
Remedy: Re-boot MCS.
------------------------------
Code: 21003A0F
Display: can't write temp_file (delete)
Used by:
Cause: Data could not be written to the temporary file.
Remedy: Re-boot MCS.
------------------------------
Code: 21003A10
Display: can't rename temp_file to err_file (delete)
Used by:
Cause: The temporary file err_file could not be renamed.
Remedy: The file can be destroyed. Execute the next command from the UCI menu, and delete the error
file. Use the following commands: ":/h0/cmds/del /h0/work_0/err/err_file".
------------------------------
Code: 21003A12
Display: can't fork help process
Used by:
Cause: The help function could not be started up.
Remedy: Perform a module check. If there are no problems detected re-install the system.
------------------------------
Code: 21003A14
Display: can't open print file
Used by:
Cause: The print file could not be opened.
Remedy: Re-execute the function. If it still doesn't work, re-boot MCS.
------------------------------
Code: 21003A15
Display: can't delete print file
Used by:
Cause: The print file could not be deleted.
Remedy: Re-execute the function. If it still doesn't work, re-boot MCS.
------------------------------
Code: 21003A16
Display: print out error
Used by:
Cause: The data could not be printed.
Remedy: Check the printer.
------------------------------
Code: 21003A17
Display: can't write print file
Used by:
第 1865 页