FUJI错误代码查询.pdf - 第1237页
are too large. A foreign object is attached to the part. Remedy: Check the camera, the vision processing board, associated cables and the focus. Place this part using Computer Vision #6. Remove any foreign objects. -----…
Cause: The part cannot be picked.
Remedy: Replenish the part supply.
------------------------------
Code: 1D010003
Display: 1D010003
Used by:
Cause: The X length is too long.
Remedy: Check the length of the part.
------------------------------
Code: 1D010004
Display: 1D010004
Used by:
Cause: The X length is too long.
Remedy: Check the length of the part.
------------------------------
Code: 1D010005
Display: 1D010005
Used by:
Cause: The Y length is too short.
Remedy: Check the length of the part.
------------------------------
Code: 1D010006
Display: 1D010006
Used by:
Cause: The Y length is too short.
Remedy: Check the length of the part.
------------------------------
Code: 1D010007
Display: 1D010007
Used by:
Cause: The Y length is too short.
Remedy: Check the length of the part.
------------------------------
Code: 1D010008
Display: 1D010008
Used by:
Cause: The Y length is inappropriate. (Too long or too short)
Remedy: Check the length of the part.
------------------------------
Code: 1D010009
Display: 1D010009
Used by:
Cause: The image was not read correctly. Protrusions and indentations on the upper and lower edges
are too large. A foreign object is attached to the part.
Remedy: Check the camera, the vision processing board, associated cables and the focus. Place this part
using Computer Vision #6. Remove any foreign objects.
------------------------------
Code: 1D01000A
Display: 1D01000A
Used by:
Cause: The image was not read correctly. Protrusions and indentations on the upper and lower edges
第 1236 页
are too large. A foreign object is attached to the part.
Remedy: Check the camera, the vision processing board, associated cables and the focus. Place this part
using Computer Vision #6. Remove any foreign objects.
------------------------------
Code: 1D01000B
Display: 1D01000B
Used by:
Cause: The X length is too long.
Remedy: Check the length of the part.
------------------------------
Code: 1D01000C
Display: 1D01000C
Used by:
Cause: The X length is inappropriate. (Too long or too short)
Remedy: Check the length of the part.
------------------------------
Code: 1D01000D
Display: 1D01000D
Used by:
Cause: The image was not read correctly. Protrusions and indentations on the upper and lower edges
are too large. A foreign object is attached to the part.
Remedy: Check the camera, the vision processing board, associated cables and the focus. Place this part
using Computer Vision #6. Remove any foreign objects.
------------------------------
Code: 1D01000E
Display: 1D01000E
Used by:
Cause: The image was not read correctly. Protrusions and indentations on the upper and lower edges
are too large. A foreign object is attached to the part.
Remedy: Check the camera, the vision processing board, associated cables and the focus. Place this part
using Computer Vision #6. Remove any foreign objects.
------------------------------
Code: 1D01000F
Display: 1D01000F
Used by:
Cause: The Y length is too short.
Remedy: Check the length of the part.
------------------------------
Code: 1D010010
Display: 1D010010
Used by:
Cause: (4 digit decimal code) : The part is tilted at an angle exceeding 45 deg..
(hexadecimal code): The Y direction dimension is too short.
Remedy: (4 digit decimal code): Check that the nozzle is clean, and that the part is clean. Check that the
correct part is being picked. (hexadecimal code): Check the length of the part.
------------------------------
Code: 1D010011
Display: 1D010011
Used by:
Cause: (4 digit decimal code): The X length is too short. (hexadecimal code): The Y length is too short.
Remedy: (4 digit decimal code): Check the part length. Check that Part data is accurate to within +-20%.
第 1237 页
(hexadecimal code): Check the length of the part.
------------------------------
Code: 1D010012
Display: 1D010012
Used by:
Cause: The X length is too long (or too short).
Remedy: Check the part length. Check that Part data is accurate to within +-20%.
------------------------------
Code: 1D010013
Display:
Used by:
Cause: The part is tilted at an angle exceeding 45 deg..
Remedy: Check that the nozzle is clean, and that the part is clean. Check that the correct part is being
picked.
------------------------------
Code: 1D010014
Display:
Used by:
Cause: There are more than 3 parts where the area to the left and right is not evenly shaped.
Remedy: Place these parts using Computer Vision #6.
------------------------------
Code: 1D010015
Display:
Used by:
Cause: The Y length is too long.
Remedy: Check the part length. Check that Part data is accurate to within +-20%.
------------------------------
Code: 1D010016
Display:
Used by:
Cause: There are more than 3 parts where the area to the left and right is not unevenly shaped.
Remedy: Place these parts using Computer Vision #6.
------------------------------
Code: 1D010017
Display:
Used by:
Cause: The Y length is too short.
Remedy: Check the part length. Check that Part data is accurate to within +-20%.
------------------------------
Code: 1D010018
Display:
Used by:
Cause: The Y length is too long.
Remedy: Check the part length. Check that Part data is accurate to within +-20%.
------------------------------
Code: 1D010019
Display:
Used by:
Cause: The X length is too short.
Remedy: Check the part length. Check that Part data is accurate to within +-20%.
------------------------------
第 1238 页