FUJI错误代码查询.pdf - 第1870页
Remedy: Set the device. ------------------------------ Code: 21003C69 Display: Module not found Used by: Cause: The file does not exist. Remedy: Re-install the software. ------------------------------ Code: 21003CA0 Disp…
Display: Illegal parameter
Used by:
Cause: An illegal (device) parameter was used.
Remedy: Correct the device settings.
------------------------------
Code: 21003C61
Display: Illegal parameter option
Used by:
Cause: Illegal parameter option.
Remedy: When startup is done directly, correct the option settings.
------------------------------
Code: 21003C62
Display: message file read error
Used by:
Cause: Message file read error.
Remedy: Re-execute the function. If it still doesn't work, re-install the software.
------------------------------
Code: 21003C63
Display: terminal read pipe file open error
Used by:
Cause: Unable to open the terminal read pipe.
Remedy: Re-execute the function. If it still doesn't work reboot MCS.
------------------------------
Code: 21003C64
Display: terminal write pipe file open error
Used by:
Cause: Unable to open the terminal write pipe.
Remedy: Re-execute the function. If it still doesn't work reboot MCS.
------------------------------
Code: 21003C65
Display: CRT event link error
Used by:
Cause: The CRT event could not be linked.
Remedy: Re-execute the function. If it still doesn't work reboot MCS.
------------------------------
Code: 21003C66
Display: Device parameter error
Used by:
Cause: The specified device does not exist.
Remedy: Check the device specifications.
------------------------------
Code: 21003C67
Display: Cleaning error
Used by:
Cause: Unable to perform cleaning.
Remedy: Try again from the beginning.
------------------------------
Code: 21003C68
Display: Device not ready
Used by:
Cause: The device is not yet set.
第 1869 页
Remedy: Set the device.
------------------------------
Code: 21003C69
Display: Module not found
Used by:
Cause: The file does not exist.
Remedy: Re-install the software.
------------------------------
Code: 21003CA0
Display: Illegal parameter
Used by:
Cause: A startup parameter is incorrect.
Remedy: Re-execute the function. If a direct startup is being performed, correct the input parameter.
------------------------------
Code: 21003CA1
Display: Illegal parameter option
Used by:
Cause: A startup option is incorrect.
Remedy: If a direct startup is performed, correct the specified option.
------------------------------
Code: 21003CA2
Display: Can't processing on fore ground
Used by:
Cause: Cannot startup on the foreground.
Remedy: Startup on the background.
------------------------------
Code: 21003CA3
Display: Message file read error
Used by:
Cause: Unable to read message file.
Remedy: Re-execute the function. If the error recurs, re-install the software.
------------------------------
Code: 21003CA4
Display: File not found
Used by:
Cause: The file to be deleted was not found.
Remedy: As this file was to be destroyed anyway, this is not a problem.
------------------------------
Code: 21003CA5
Display: File open error
Used by:
Cause: Unable to open file.
Remedy: Contact Fuji.
------------------------------
Code: 21003CA6
Display: File write error
Used by:
Cause: Unable to write to file.
Remedy: Contact Fuji.
------------------------------
Code: 21003CA7
第 1870 页
Display: File unlink error
Used by:
Cause: Unable to delete file.
Remedy: Contact Fuji.
------------------------------
Code: 21003CA8
Display: File attribute change error
Used by:
Cause: Unable to change file attributes.
Remedy: Contact Fuji.
------------------------------
Code: 21003CA9
Display: File copy error
Used by:
Cause: Unable to copy file.
Remedy: Contact Fuji.
------------------------------
Code: 21003F00
Display: Event create error
Used by:
Cause: Unable to create login_users event.
Remedy: Re-boot MCS.
------------------------------
Code: 21003F01
Display: Event create error
Used by:
Cause: Unable to create req_pr_stop event.
Remedy: Re-boot MCS.
------------------------------
Code: 21003F02
Display: Event create error
Used by:
Cause: Unable to create Error_0 event.
Remedy: Re-boot MCS.
------------------------------
Code: 21003F03
Display: Event create error
Used by:
Cause: Unable to create Error_1 event.
Remedy: Re-boot MCS.
------------------------------
Code: 21003F04
Display: Event create error
Used by:
Cause: Unable to create Term01 event.
Remedy: Re-boot MCS.
------------------------------
Code: 21003F05
Display: Event create error
Used by:
Cause: Unable to create Term02 event.
第 1871 页