FUJI错误代码查询.pdf - 第1956页

Display: CRT event link error Used by: Cause: Unable to link the CRT event. Remedy: Re-boot MCS. ------------------------------ Code: 21007703 Display: File read error Used by: Cause: Unable to read the file. Remedy: Che…

100%1 / 5282
Used by:
Cause: The coordinates in the sequence data are outside the board range.
Remedy: Check that the correct values are input in XA, YA, Pcb_x and Pcb_y in the production program.
Check that the correct values are input in Pcb_org in the environment file. Pcb_org=x,y, board orientation
and change flag should be checked. The check flag could be either 0 or 1.
------------------------------
Code: 21007650
Display:
Used by:
Cause: The environment file could not be opened.
Remedy: Re-install the software.
------------------------------
Code: 21007651
Display:
Used by:
Cause: The environment file could not be read.
Remedy: Re-install the software.
------------------------------
Code: 21007652
Display: "Feeder position in PT file is out of range"
Used by:
Cause: A feeder position specified as fixed in the PST file is outside the feeder station range.
Remedy: Specify a feeder position within the feeder station's range.
------------------------------
Code: 21007653
Display: "There is insufficient space for a feeder in PT file"
Used by:
Cause: An attempt was made to allocate the feeder in question as specified by the PST file, but an error
occurred when the feeder width was checked against the end of the station.
Remedy: Change the PST specification number of the feeder in question.
------------------------------
Code: 21007654
Display: "Space between feeders in PT file is insufficient"
Used by:
Cause: An attempt was made to allocate the feeder in question as specified by the PST file, but an error
occurred due to interference between feeders.
Remedy: Change the PST specification number of the feeder in question.
------------------------------
Code: 21007700
Display: Illegal parameter option
Used by:
Cause: The start-up parameter is illegal.
Remedy: When doing direct start up, check and correct the input options.
------------------------------
Code: 21007701
Display: Message file read error
Used by:
Cause: Unable to read the message file.
Remedy: Re-install the software.
------------------------------
Code: 21007702
第 1955 页
Display: CRT event link error
Used by:
Cause: Unable to link the CRT event.
Remedy: Re-boot MCS.
------------------------------
Code: 21007703
Display: File read error
Used by:
Cause: Unable to read the file.
Remedy: Check the filename. If it exists, use the Editor to check its contents. If there is a startup error
or if the contents of the file are damaged, rebuild the file.
------------------------------
Code: 21007704
Display: File seek error
Used by:
Cause: The seek file did not work on the production program file.
Remedy: Check the file, and correct and save it. If there is a startup error or if the contents of the file are
damaged, rebuild the file.
------------------------------
Code: 21007705
Display: Production file open error
Used by:
Cause: Unable to open the production file.
Remedy: Check the filename and check the contents of the file. If there is a startup error or if the
contents of the file are damaged, rebuild the file.
------------------------------
Code: 21007706
Display: Production file read error
Used by:
Cause: Unable to read the production file.
Remedy: Check the filename and the file contents. If there is a startup error or if the contents of the file
are damaged, rebuild the file.
------------------------------
Code: 21007707
Display: Production file seek error
Used by:
Cause: The seek function does not work on the production program file.
Remedy: Check the filename and the file contents. If there is a startup error or if the contents of the file
are damaged, rebuild the file.
------------------------------
Code: 21007708
Display: Input file open error
Used by:
Cause: Unable to open the input file.
Remedy: Check the filename and the file contents. If there is a startup error or if the contents of the file
are damaged, rebuild the file.
------------------------------
Code: 21007709
Display: Output file open error
Used by:
Cause: Unable to open the output file.
第 1956 页
Remedy: Check that the file write protect setting is not on.
------------------------------
Code: 2100770A
Display: Output file write error
Used by:
Cause: Output file cannot be written to.
Remedy: Check that the hard disk has sufficient remaining memory. If it does not, delete any
unnecessary files, or perform maintenance on the hard disk.
------------------------------
Code: 2100770B
Display: Base program file open error
Used by:
Cause: Unable to open the base program file.
Remedy: Check the filename and the file contents. If there is a startup error or if the contents of the file
are damaged, rebuild the file.
------------------------------
Code: 2100770C
Display: Base program file read error
Used by:
Cause: Unable to read the base program file.
Remedy: Check the filename and the file contents. If there is a startup error or if the contents of the file
are damaged, rebuild the file.
------------------------------
Code: 2100770D
Display: Base program file access error
Used by:
Cause: Unable to access the base program file.
Remedy: Check the filename and the file contents. If there is a startup error or if the contents of the file
are damaged, rebuild the file.
------------------------------
Code: 2100770E
Display: Base program file seek error
Used by:
Cause: Unable to seek the file.
Remedy: Check the filename and the file contents. If there is a startup error or if the contents of the file
are damaged, rebuild the file.
------------------------------
Code: 2100770F
Display: PST file open error
Used by:
Cause: Unable to open the PST file.
Remedy: Check the filename and the file contents. If there is a startup error or if the contents of the file
are damaged, rebuild the file.
------------------------------
Code: 21007710
Display: PST file read error
Used by:
Cause: Unable to read the PST file.
Remedy: Check the filename and the file contents. If there is a startup error or if the contents of the file
are damaged, rebuild the file.
------------------------------
第 1957 页