semi合集-English.pdf - 第1163页

SEMI E5-1104 © SEMI 1982, 2004 105 Stream,Function Name (Mnemonic) Direction S4,F17 Request to Receive (RTR) S,H<->E,reply Description Receiver requests the sender initiate a conversation to send the specified mate…

100%1 / 7923
SEMI E5-1104 © SEMI 1982, 2004 104
Stream,Function Name (Mnemonic) Direction
S4,F11 Stuck in Receiver (SRN) S,H<-E
Description
An error from the receiver to the host. The time between Send Material (SMN) and detection of the material at the receiver
exceeds the receiver’s t2 timeout. The receiver goes to a hold state until the disposition of material is determined.
Structure
L,2
1. <PTN>
2. <MID>
Exception
None
S4,F12 Not Used
Stream,Function Name (Mnemonic) Direction
S4,F13 Send Incomplete Timeout (SIN) S,H<-E
Description
An error from the sender to the host. The time between the receipt of the Send Material (SMN) and the receipt of Handshake-
Complete (HCN) exceeds the sender’s t3 timeout. There has been an error in the handshake and the transfer mechanism is
turned off.
Structure
L,2
1. <PTN>
2. <MID>
Exception
None
S4,F14 Not Used
Stream,Function Name (Mnemonic) Direction
S4,F15 Material Received (MRN) S,H<-E
Description
A message from the receiver to the host. Material has been transferred to the receiver.
Structure
L,2
1. <PTN>
2. <MID>
Exception
None
S4,F16 Not Used
SEMI E5-1104 © SEMI 1982, 2004 105
Stream,Function Name (Mnemonic) Direction
S4,F17 Request to Receive (RTR) S,H<->E,reply
Description
Receiver requests the sender initiate a conversation to send the specified material to the specified port.
Structure
L,2
1. <PTN>
2. <MID>
Exception
A zero-length MID means equipment doesn’t know MID.
Stream,Function Name (Mnemonic) Direction
S4,F18 Request to Receive Acknowledge (RRA) S,H<->E
Description
Acknowledge or error
Structure
<RRACK>
Exception
None
10.8.2 Support for Material Movement Management Services — The following messages were defined to support
SEMI E32.
10.8.2.1 Macro Level Messages — The following messages support the host supervised macro level of material
movement as defined in SEMI E32. Stream 1 Macro Level Messages can be found in Section 10.5: S1F19, Get
Attribute (GA); S1F20, Attribute Data (AD).
SEMI E5-1104 © SEMI 1982, 2004 106
Stream,Function Name (Mnemonic) Direction
S4,F19 Transfer Job Create (TJ) M,H->E,reply
Description
The host requests that the equipment undertake one or more discrete (or atomic) transfers to achieve a host defined objective.
The host provides the transfer specifications for each atomic transfer. Atomic transfers on separate ports on the equipment are
allowed to execute in parallel. Atomic transfers for a port must be executed sequentially or in some cases concurrently. Both
equipment transfer partners for each atomic transfer must receive appropriate Transfer Job Request messages in order to execute
a transfer. If S4,F20 is multi-block, it must be preceded by the S4,F25/S4,F26 Inquire/Grant transaction.
Structure
L,2
1. <DATAID>
2. L,2
1. <TRJOBNAME>
2. L,n [n = #atomic xfrs defined for this job]
1. L,12 [Specification for first atomic xfr]
1. <TRLINK> [Atomic transfer identifier]
2. <TRPORT> [Port to be used for transfer]
3. <TROBJNAME> [Transfer object identifier]
4. <TROBJTYPE> [Object type–what form is the material in]
5. <TRROLE> [Role in transfer–primary/secondary]
6. <TRRCP> [Transfer recipe identifier]
7. <TRPTNR> [Identifier of transfer partner]
8. <TRPTPORT> [Partner's Port to be Used]
9. <TRDIR> [Transfer direction-send or receive]
10. <TRTYPE> [Active or Passive]
11. <TRLOCATION> [Location to send/receive mtl]
12. <TRAUTOSTART> [Does eqp await host start command after setup?]
.
.
n. L,12 [Specification for nth atomic xfr]
1. <TRLINK]
12. <TRAUTOSTART>
Exception
None