semi合集-English.pdf - 第6918页

SEMI S8-0705 © SEMI 1995, 2005 15 Section Indicator Acceptance Criteria Metric Units (US Customary Units) Actual Conforms/Does N ot Conform/Not Applicable 8.2.2 Height of video di splay terminal (stacked monitors), does …

100%1 / 7923
SEMI S8-0705 © SEMI 1995, 2005 14
Section Indicator
Acceptance Criteria
Metric Units (US Customary Units)
Actual
Conforms/Does
N
ot Conform/Not
Applicable
7.5.3 Heavy components (objects which have a lifting
index of 0.5 or greater, see SESC, Section 1.0)
or bulky components (greater than 36 inches in
length) requiring frequent removal/installation
should include guide/locating aids to assist in
positioning.
Guide/locating pins present.
7.5.4 Cables, connectors, plugs, and receptacles
should be labeled, keyed, color coded, or
otherwise configured to make connection easier
and prevent cross connection. This feature is
assessed only if a SEMI S2 assessment is not
being conducted.
Identification present, keyed where
needed.
7.5.5 Circuit boards mounted in a card cage
configuration should have gripping or ejecting
aids for mounting and removal.
Finger access, gripping, or ejecting
aids available.
8 Display Location
8.1 Location for operator primary interface,
standing station.
#1
8.1.1 Height of video display terminal (single
monitor). Does not include touchscreens,
measured from floor to center of screen.
maximum 1470 mm (58 in.)
minimum 1320 mm (52 in.)
8.1.2 Height of video display terminal (stacked
monitors). Does not include touchscreens,
measured from floor to top line of the top
monitor.
maximum 1680 mm (66 in.)
The primary monitor in a stacked
configuration is the bottom
monitor.
8.1.3 Height of infrequently used video display
terminal (viewed briefly less often than once per
hour) measured to top line of monitor.
maximum 1680 mm (66 in.)
8.1.4 Height of very infrequently used video display
terminal (viewed briefly less often than once per
day) measured to top line of monitor.
maximum 1880 mm (74 in.)
8.1.5 Height of infrequently viewed visual signal
measured to the top of the signal. This
guideline does not apply to light towers.
maximum 2130 mm (84 in.)
8.1.6 Height of touch screen monitor. maximum 1470 mm (58 in.),
measured from floor to uppermost
active pad on screen
minimum 910 mm (36 in.),
measured from floor to lowest
active pad on the screen
See §9 for horizontal reach criteria.
8.1.7 Tilt angle of touch screen monitor between 41
and 48 inches in height to top of screen.
Upward minimum 30 degrees
8.1.8 Tilt angle of touch screen monitor less than 41
inches in height to top of screen.
Upward minimum 45 degrees
8.2 Location for operator primary interface, seated
station
#2
8.2.1 Height of video display terminal (single
monitor), does not include touchscreens,
measured from floor to centerline of monitor.
maximum 1190 mm (47 in.)
minimum 940 mm (37 in.)
SEMI S8-0705 © SEMI 1995, 2005 15
Section Indicator
Acceptance Criteria
Metric Units (US Customary Units)
Actual
Conforms/Does
N
ot Conform/Not
Applicable
8.2.2 Height of video display terminal (stacked
monitors), does not include touchscreens,
measured from floor to top line of top monitor.
maximum 1400 mm (55 in.)
minimum 940 mm (37 in.)
The primary monitor in a stacked
configuration is the bottom
monitor.
8.2.3 Tilt angle of video display terminal greater than
55 inches in height to top of screen. This line
item becomes significant in the event that the
maximum height criteria cannot be met.
Downward minimum 15 degrees
8.2.4 Height of touch screen monitor. maximum 1070 mm (42 in.)
measured from floor to highest
active pad on the screen
minimum 760 mm (30 in.)
measured from floor to lowest
active pad on the screen
See §9 for horizontal reach criteria.
8.3 Display characteristics
8.3.1 Lateral distance from the centerline of the
display to the centerline of the input device(s).
See MIL-STD-1472 for a depiction of this.
maximum 320 mm (12.6 in.)
8.3.2 Character height (Specific to Chinese, Korean,
and Japanese characters.)
Character height is greater than or
equal to the viewing distance
divided by 143. Recommended
viewing distance is between 457
mm (18 in.) and 762 mm (30 in.)
8.3.3 Character height (All characters other than
Chinese, Korean, and Japanese.)
Character height is greater than or
equal to the viewing distance
divided by 215. Recommended
viewing distance is between 457
mm (18 in.) and 762 mm (30 in.)
9
Hand Control Location (These criteria only
apply to controls, tools, and materials accessed
for routine production operation and
maintenance.)
9.1 Standing station
#1
9.1.1 Vertical location of very infrequently used
controls (controls used less often than once
every 24 hours) measured from the standing
surface to the centerline of the control.
maximum 1640 mm (64.5 in.)
minimum 0 mm (0 in.)
SEMI S8-0705 © SEMI 1995, 2005 16
Section Indicator
Acceptance Criteria
Metric Units (US Customary Units)
Actual
Conforms/Does
N
ot Conform/Not
Applicable
9.1.2 Location of infrequently used and/or critical
controls. Maximum reaches are indicated for
various heights. Reaches are measured from the
leading edge of the equipment or obstacle.
Controls should not be located above 1638 mm
(64.5 in.) or below 838 mm (33 in.). Interpolate
for intermediate values.
Height of 1638 mm (64.5 in.)
Height of 1524 mm (60 in.)
Height of 1422 mm (56 in.)
Height of 1321 mm (52 in.)
Height of 1219 mm (48 in.)
Height of 1118 mm (44 in.)
Height of 1016 mm (40 in.)
Height of 914 mm (36 in.)
Height of 838 mm (33 in.)
reach 254 mm (10.0 in.)
reach 368 mm (14.5 in.)
reach 432 mm (17.0 in.)
reach 470 mm (18.5 in.)
reach 483 mm (19.0 in.)
reach 470 mm (18.5 in.)
reach 394 mm (15.5 in.)
reach 292 mm (11.5 in.)
reach 178 mm (7.0 in.)
9.1.3 Location of frequently used controls. Maximum
reaches are indicated for various heights.
Reaches are measured from the leading edge of
the equipment or obstacle. Controls should not
be located above 1270 mm (50 in.) or below
940 mm (37 in.). Interpolate for intermediate
values.
Height of 1270 mm (50 in.)
Height of 1219 mm (48 in.)
Height of 1168 mm (46 in.)
Height of 1118 mm ( 44 in.)
Height of 1067 mm (42 in.)
Height of 1016 mm (40 in.)
Height of 940 mm (37 in.)
reach 292 mm (11.5 in.)
reach 330 mm (13.0 in.)
reach 368 mm (14.5 in.)
reach 394 mm (15.5 in.)
reach 406 mm (16.0 in.)
reach 394 mm (15.5 in.)
reach 318 mm (12.5 in.)
9.2 Seated station
#2
9.2.1 Location of infrequently used and/or critical
controls. Maximum reaches are indicated for
various heights. Reaches are measured from the
leading edge of the work surface or obstacle.
Controls should not be located above 1397 mm
(55 in.) or below 533 mm (21 in.). Interpolate
for intermediate values.
Height of 1397 mm (55 in.)
Height of 1270 mm (50 in.)
Height of 1168 mm (46 in.)
Height of 1067 mm (42 in.)
Height of 965 mm (38 in.)
Height of 864 mm (34 in.)
Height of 762 mm (30 in.)
Height of 660 mm (26 in.)
Height of 533 mm (21 in.)
reach 356 mm (14.5 in.)
reach 432 mm (17.0 in.)
reach 470 mm (18.5 in.)
reach 483 mm (19.0 in.)
reach 483 mm (19.0 in.)
reach 470 mm (18.5 in.)
reach 445 mm (17.5 in.)
reach 381 mm (15.0 in.)
reach 254 mm (10.0 in.)