semi合集-English.pdf - 第6372页

11 Label Material and Adhesive 11.1 Label material should not generate particles. 11.2 Label a dhesive shoul d not prohibit recyclabil ity of the shipping pac kages. Figure 4 Definition of Packaging Forms for Leadframe, …

8 Human-Readable Interpretation (HRI) Symbols

8.1 Each barcode symbol data field on the customer field shall have an associated human-readable data field either

immediately above or below it.

8.1.1 Start and stop characters shall not be included, but the data field identifier shall be included.

8.2 The height of human-readable characters shall be 3.0 mm.

8.3 The spaces above and below the human-readable characters shall be 1.0 mm.

9 Dimensions and Placement of Data Field on Label

9.1 The size of barcode label shall be 42 mm in height and 120 mm in width.

9.2 The dimensions and placement of data field on label are shown in Figure 3.

9.3 The barcode and human-readable characters shall be placed within this area of the label as indicated in Figure 3.

Figure 3

Dimensions and Placement of Data Field on Label

Horizontal Dimension Value (mm) Vertical Dimension Value (mm)

L 120.0 W 40

S 40.0 M 2.0

C 80.0 H 3.0

BL 68.625 S 1.0

Q1 5.0 BH 8.0

Q2 6.375

10 Barcode Label Location

10.1 The barcode label shall be located on the end of the packages for easy identification when the packages are

temporarily stored in the storage shelf.

SEMI G71-0996 © SEMI 1996, 2004 4

11 Label Material and Adhesive

11.1 Label material should not generate particles.

11.2 Label adhesive should not prohibit recyclability of the shipping packages.

Figure 4

Definition of Packaging Forms for Leadframe, Molding Compound, Die Attach Material, and Bonding Wire

5 SEMI G71-0996 © SEMI 1996, 2004

NOTICE: SEMI makes no warranties or

representations as to the suitability of the standard set

forth herein for any particular application. The

determination of the suitability of the standard is solely

the responsibility of the user. Users are cautioned to

refer to manufacturer’s instructions, product labels,

product data sheets, and other relevant literature

respecting any materials or equipment mentioned

herein. These standards are subject to change without

notice.

By publication of this standard, SEMI takes no position

respecting the validity of any patent rights or copyrights

asserted in connection with any item mentioned in this

standard. Users of this standard are expressly advised

that determination of any such patent rights or

copyrights, and the risk of infringement of such rights,

are entirely their own responsibility.

International), 3081 Zanker Road, San Jose, CA 95134. Reproduction of

the contents in whole or in part is forbidden without express written

consent of SEMI.