semi合集-English.pdf - 第2848页

SEMI E102-0600 © SEMI 2000 56 Factor y Oper ations Material Cont ainer aa a Material Transpo rtManager Job TrJob1 AMHS Equipmen t Controllers MaterialTracking Location oh s2MTL Mate rialTrac king Location st k4MTL Materi…

100%1 / 7923
SEMI E102-0600 © SEMI 200055
R1-2.13 Scenario 13 — Interactions at an Individual Interface Level (including capacity reservation)
2: requestJob(JobType Transport, Priority 1, Deadline time1, container aaa, DestinationMachine stk9)
3: returns Job Handle TrJob1
7: makeInTransit()
22: setMaterialTrackingLocation(materialTrackingLocation Ohs2)
23: DurableLocationChangedEvent
27: setMaterialTrackingLocation(materialTrackingLocation stk9MTL1)
6: informJobStateChange(Job TrJob1, previousState JobQueued, newState JobExecuting)
12: Transfer (aaa, Bay_Out) (Internal Interface)
13: Transfer Command to Stk4 (src Stk4, dest st4/Bay_Out) (Stocker SEM)
14: Transfer Command Updates (Stocker SEM)
15: Transfer Command Complete (Stocker SEM)
16: Transfer complete (Internal Interface)
18: Transfer (aaa, stk4/Bay_Out, stk9/Bay_In) (Internal Interface)
19: Transfer Command to Ohs2 (src stk4/Bay_Out, dest stk9/Bay_In) (IBSEM)
20: Transfer Command Update (IBSEM)
21: Transfer Update (Internal Interface)
25: Transfer Command Complete (IBSEM)
26: Transfer Complete (Internal Interface)
29: Transfer (carrier aaa, src Bay_In, dest shelf) (Internal Interface)
30: Transfer Command to stk9 (src Bay/In, dest shelf) (Stocker SEM)
31: Transfer Command Updates (Stocker SEM)
8: MaterialContainerStateChangedEvent
MTSC determines AMHS Route (Internal Service)
9: getUnit()
4: JobStateChangedEvent(..previousState JobUndefined, newState JobQueued)
5: JobStateChangedEvent(..previousState JobQueued, NewState JobExecuting)
17: removeMaterial(MaterialContainer aaa)
24: addMaterialToTrack(MaterialContainer aaa)
1: setUnit( unitvalue)
10: getMaterialTrackingLocation(unitvalue)
11: reserveCapacity(MaterialContainer aaa)
28: DurableLocationChangedEvent
Factory
Operations
Material
Container aaa
Material
TransportManager
Job TrJob1 AMHS Equipment
Controllers
MaterialTracking
Location ohs2MTL
MaterialTracking
Location stk4MTL
MaterialTracking
Location stk9MTL1
Storage
Machine stk9
Transport
Machine Ohs2
Storage
Machine stk4
Figure R1-26
Scenario Case 13
SEMI E102-0600 © SEMI 2000 56
Factory
Operations
Material
Container aaa
Material
TransportManager
Job TrJob1 AMHS Equipment
Controllers
MaterialTracking
Location ohs2MTL
MaterialTracking
Location stk4MTL
MaterialTracking
Location stk9MTL1
Storage
Machine stk9
Transport
Machine Ohs2
Storage
Machine stk4
36: makeInTransit()
37: MaterialContainerStateChangedEvent
39: informJobStateChange(Job TrJob1, previousState JobExecuting, newState JobCompleted)
34: removeMaterial(MaterialContainer aaa)
35: addMaterialToTrack(MaterialContainer aaa)
38: JobStateChangedEvent(..previousState JobExecuting, newState JobCompleted)
40: removeFinishedJob(Job TrJob1)
41: JobStateChangedEvent(..previousState JobCompleted, newState JobUndefined)
32: Transfer Command Complete (Stocker SEM)
33: Transfer Command Complete (Internal Interface)
Figure R1-27
Scenario Case 13 (continued)
SEMI E102-0600 © SEMI 200057
RELATED INFORMATION 2
LOGICAL PARTITION STORAGE
NOTE: This related information is not an official part of SEMI E10# and was derived from the work of the I300I/J300E AMHS
workgroup accomplished during development of the proposed standard. This related information is included with the Material
Transport and Storage Component specification to aid the readers in understanding the intent and use of the standard. This related
information was approved for publication by full letter ballot procedures on January 14, 2000.
R2-1 The concept of Stocker storage via logical partitions has been implemented through the use of the
MaterialTrackingLocation concept and interfaces. In the example below, the correlation between Durables and
MaterialTrackingLocations are each object’s unit attribute. First, the Factory Supervisor sets the Durable unit to a
particular value based on user specifications. The MTSC then maps the Durable Unit to the appropriate
MaterialTrackingLocation unit for the destination Storage Machine in order to determine the appropriate logical
partition for that particular durable. It is not required that the Durable unit and MaterialTrackingLocation unit be
identical in order for a mapping to occur, the MTSC may implement mapping logic in order to obtain various
relationships between Durable units and MaterialTrackingLocation units.
<Factory Supervisor>
Factory Supervisor determines
the “Parameter ” based on the
rules.
Factory Supervisor writes the
“Unitvalue ” using “setUnit”
for the carrier.
<MTSC>
MTSC maps durable unit to
machine MTL unit.
Photo
Dummy
Empty
Durable Units Machine MTL Units
Product
Flow
Type of Carrier
Durable unit to
Machine MTL
unit mapping
Conditions
MTM obtains “Durable Units” using
“getUnit” from Durable interface.
L/P-1
L/P-2
L/P-3
L/P-4
L/P-5
L/P-6
L/P-7
MTM obtains “Machine MTL Units” using
“getUnit” from Machine MTL interface.
Figure R2-1
Storage in Logical Partitions
NOTICE: SEMI makes no warranties or representations as to the suitability of the specification set forth herein for
any particular application. The determination of the suitability of the specification is solely the responsibility of the
user. Users are cautioned to refer to manufacturer’s instructions, product labels, product data sheets, and other rele-
vant literature respecting any materials mentioned herein. These specifications are subject to change without notice.
The user’s attention is called to the possibility that compliance with this specification may require use of
copyrighted material or of an invention covered by patent rights. By publication of this specification, SEMI takes
no position respecting the validity of any patent rights or copyrights asserted in connection with any item mentioned
in this specification. Users of this specification are expressly advised that determination of any such patent rights or
copyrights, and the risk of infringement of such rights, are entirely their own responsibility.
Copyright by SEMI® (Semiconductor Equipment and Materials
International), 3081 Zanker Road, San Jose, CA 95134. Reproduction o
f
the contents in whole or in part is forbidden without express written
consent of SEMI.