semi合集-English.pdf - 第2141页
SEMI E54.15-0305 © SEMI 2005 13 Services ID Service Name CDM Tag 01 Reset AeoS1 03 Abort AeoS2 05 Recover AeoS3 25 Operate AeoS4 07 GetAttribute AeoS5 09 SetAttribute AeoS6 27 RestoreDefault AeoS7 7.12 Actuat or-BO Objec…
SEMI E54.15-0305 © SEMI 2005 12
7.10 Actuator-AO Object (Aao) –– The presentation of the Actuator Analog Output (Actuator-AO) object instance
attributes and services are as indicated in Table 11.
Table 11 Actuator-AO Object Instance Attributes and Services
Actuator-AO (Aao)
Class ID = 36, Instance = 01 through n
Attributes
ID Attribute Name CDM Tag
01 Name AaoA1
02 Status AaoA2
03 Alarm Enable AaoA3
04 Warning Enable AaoA4
16 Setting AaoA16
17 SafeState AaoA17
18 WatchRate AaoA18
19 Watchdog AaoA19
64 Offset AaoA64
65 Gain AaoA65
66 DataType AaoA66
67 DataUnits AaoA67
Services
ID Service Name CDM Tag
01 Reset AaoS1
03 Abort AaoS2
05 Recover AaoS3
25 Operate AaoS4
07 GetAttribute AaoS5
09 SetAttribute AaoS6
27 RestoreDefault AaoS7
7.11 Actuator-EO Object (Aeo) –– The presentation of the Actuator Enumerated Output (Actuator-EO) object
instance attributes and services are as indicated in Table 12.
Table 12 Actuator-EO Object Instance Attributes and Services
Actuator-EO (Aeo)
Class ID = 37, Instance ID = 01 through o
Attributes
ID Attribute Name CDM Tag
01 Name AeoA1
02 Status AeoA2
03 Alarm Enable AeoA3
04 Warning Enable AeoA4
16 Setting AeoA16
17 SafeState AeoA17
18 WatchRate AeoA18
19 Watchdog AeoA19
SEMI E54.15-0305 © SEMI 2005 13
Services
ID Service Name CDM Tag
01 Reset AeoS1
03 Abort AeoS2
05 Recover AeoS3
25 Operate AeoS4
07 GetAttribute AeoS5
09 SetAttribute AeoS6
27 RestoreDefault AeoS7
7.12 Actuator-BO Object (Abo) –– The presentation of the Actuator Binary Output (Actuator-BO) object instance
attributes and services are as indicated in Table 13.
Table 13 Actuator-BO Object Instance Attributes and Services
Actuator-BO (Abo)
Class ID = 38, Instance ID = 01 through p
Attributes
ID Attribute Name CDM Tag
01 Name AboA1
02 Status AboA2
03 Alarm Enable AboA3
04 Warning Enable AboA4
16 Setting AboA16
17 SafeState AboA17
18 WatchRate AboA18
19 Watchdog AboA19
Services
ID Service Name CDM Tag
01 Reset AboS1
03 Abort AboS2
05 Recover AboS3
25 Operate AboS4
07 GetAttribute AboS5
09 SetAttribute AboS6
27 RestoreDefault AboS7
SEMI E54.15-0305 © SEMI 2005 14
7.13 Controller Object (C) –– The presentation of the Controller (C) object instance attributes and services are as
indicated in Table 14.
Table 14 Controller-C Instance Object Attributes and Services
Controller (C)
Class ID = 39, Instance ID = 01 through q
Attributes
ID Attribute Name CDM Tag
01 Name CA1
02 Status CA2
03 Alarm Enable CA3
04 Warning Enable CA4
16 Setpoint CA16
17 ProcessVariable CA17
18 ControlVariable CA18
19 DataType CA19
20 DataUnits CA20
21 AlarmSettleTime CA21
22 AlarmErrorBand CA22
24 WarningSettleTime CA24
25 WarningErrorBand CA25
Services
ID Service Name CDM Tag
01 Reset CS1
03 Abort CS2
05 Recover CS3
25 Operate CS4
07 GetAttribute CS5
09 SetAttribute CS6
27 RestoreDefault CS7
8 Protocol Compliance
8.1 A method of testing protocol compliance is required to verify implementation conformance to the standard.
SafetyBUS p Club International e.V. has established and maintains a mechanism for compliance certification of
devices on a SafetyBus p network. This certification includes procedures and reporting mechanisms to demonstrate
conformance testing and interoperability testing of SafetyBUS p devices. The SafetyBUS p Club International e.V.
organization can be contacted at the web site http://www.safetybus.com to obtain the latest certification procedures.
9 Specific Device Model Mappings
9.1 This section provides for the mapping of network visible specific device structure and behavior, specified in a
SEMI standard SDM specification, to the SafetyBUS p network. Each subsection is devoted to a single Specific
Device Model (SDM) specification. Additional SDM mappings are added as sub-sections to this NCS specification
according to SEMI guidelines and the guidelines of the SEMI SAN Interoperability standard. Unless otherwise
noted, all attributes and services described are instance level attributes (as opposed to class level attributes).
9.1.1 Note that the formats of object instance attributes and services are detailed in the associated SDM
specification; the presentation of object attributes and services to the SafetyBUS p network is detailed in the tables
contained in the following sub-sections and in the SafetyBUS p standard specifications. Note that relationships
between object classes, including inheritance are defined in the associated SDM specification and the CDM
specification.