semi合集-English.pdf - 第5272页
SEMI M45-0703 © SEMI 2001, 2003 3 5.4.2.3 Optional informati on, as agreed to between supplier an d user, may be include d. 5.5 Secondary Container 5.5.1 Whether the seconda r y container material is a single use materia…
SEMI M45-0703 © SEMI 2001, 2003 2
shipping box main device and door by molding or by a
method that cannot be easily erased.
5.1.4 The wafer shipping box door must be designed so
that it can be automatically as well as manually opened
and closed.
5.1.5 Optional top robotic handling flange or side
mounted human handles will not be attached during
transport of the wafer shipping box. If required, these
items will be applied at the receiving site. The design of
these features will allow for quick, lockable attachment
to the wafer shipping box.
5.1.6 Wafers must be visible inside when the wafer
shipping box is closed.
5.1.7 No tape may be used to seal the wafer shipping
box.
5.1.8 The only environment in which wafers can be
placed into or taken out of a wafer shipping box bag, as
well as the surrounding environment thereafter, is clean
room air.
5.1.9 The body and door of the wafer shipping box
must be designed to allow for multiple reuse cycles
without compromising wafer quality.
5.1.10 After a customer has transferred an accepted
wafer to a fab carrier, the wafer shipping box must be
returned to the supplier without having used it for any
other purpose. The wafer shipping box will be inserted
into a bag sealed prior to return to the wafer supplier
using the same type bag (agreed upon by supplier and
customer).
5.1.11 Each wafer shipping box must be returned only
to the supplier that delivered the wafers for which the
wafer shipping box was used. A display for the supplier
showing the number of times a wafer shipping box was
used is optional.
5.1.12 The property rights of wafer shipping box used
to deliver wafers and to be returned after unloading
belong to the wafer manufacturers.
5.1.13 The wafer shipping box will maintain its
dimensional stability throughout its lifetime.
5.1.14 Wafer shipping box materials must be
recyclable after useful life.
5.2 Wafer Shipping Box Bagging System
5.2.1 It is preferable that the bag material is recyclable,
but until a technical solution is found, bags should be
easily disposable.
5.2.2 The bagging system must consist of two or more
layers of bags. At least one layer must be a moisture
barrier.
5.2.3 The use of desiccant between the bag layers is
currently optional. Its use must not negatively impact
the cleanliness of the bagging system.
5.2.4 Bags may be evacuated optionally. The initial
bag ambient, prior to evacuation and sealing, may be
temperature/humidity controlled clean room air, clean
dry air (CDA), or nitrogen (N2).
5.3 Wafer Shipping Box and Bag Labeling
5.3.1 Prepare and apply two identical labels that are in
accordance with SEMI T3, with additional
requirements as noted below.
5.3.1.1 Label size may be as large as 120 mm x 120
mm.
5.3.1.2 Label data content shall include all the data
specified in SEMI T3, including wafer ID and FOSB
slot #. Additional data may be added optionally, as
agreed to between supplier and user.
5.3.1.3 Apply one label to the center of the rear surface
of the FOSB. The long axis of the label shall be
parallel to the FOSB base.
5.3.1.4 Apply the other label to the shipping bag, on
the door side of the FOSB.
5.3.2 The wafer shipping box and outer bag labels
should use the same peelable, cleanroom compatible
label stock. The labels must not leave residual adhesive
or backing material on the wafer shipping box when
removed.
5.4 Secondary Container Labeling
5.4.1 Labels shall be placed in accordance with EIA-
556-B.
5.4.2 Prepare labels in accordance with EIA-556-B.
Information shall include at least the following [Items
below marked by an asterisk (*) are mandatory EIA-
556-B data fields]:
5.4.2.1 Bar Code Data Fields
• Transport unit License Plate number*
• Transaction identification (Purchase Order
number)*
• Total Quantity of Wafers*
• Total Quantity of Cartons
• Customer Part number*
5.4.2.2 Non-Bar Code Data Fields
• Ship-to address (including Customer name)*
• Ship-from address (including Supplier name)*
SEMI M45-0703 © SEMI 2001, 2003 3
5.4.2.3 Optional information, as agreed to between
supplier and user, may be included.
5.5 Secondary Container
5.5.1 Whether the secondary container material is a
single use material or a material that can be reused
multiple times should be decided by considering the
transport environment to minimize the packaging cost.
The same is true for the secondary container sealing
system.
5.5.2 The secondary container should be collapsible for
efficient storage and empty transport.
5.5.3 The materials for the secondary container should
be recyclable after the designated number of uses is
completed.
5.5.4 The design and size of the secondary container
should have an optimal fit with the standard pallet
noted in Section 5.7.2, and should have the strength to
be stacked in four layers.
5.5.4.1 Secondary Container Dimensions —The outer
size of the secondary container shall be 580 mm wide
by 500 mm deep by 460 mm high.
NOTE 2: The specification does not specify tolerances on the
dimensions, but the specified dimensions should be adhered
to as closely as possible to enhance container stackability.
NOTE 3: These values of width (W) and depth (D) are
selected to allow four containers to be placed on the world
wide standard pallet (1200 mm by 1000 mm).
NOTE 4: The value of height (H) is selected to allow three
layers to be stacked in a standard airfreight container.
NOTE 5: The outer dimensions of the secondary container
should be determined considering the requirements of
Sections 5.1 (wafer shipping box) and 5.2 (bagging system)
and allowance for cushioning thickness sufficient to prevent
wafer breakage by accidental drop from a height of 800 mm.
NOTE 6: Height (H) can be negotiated between wafer
supplier and user, if the proposed specification is not satisfied
for either the supplier or the user.
5.5.5 The number of wafer shipping boxes per
secondary container must allow for optimal
transportation costs.
5.5.6 Ergonomic considerations should be made for the
secondary container, and should be compatible with
manual handling. When handling very large quantities,
a supplemental handling system is necessary.
5.5.7 The secondary container design is not required to
provide specific weather protection. The storage
environment should not be affected by the weather.
5.6 Cushions
5.6.1 Whether the cushion material is a single use
material or a material that can be reused multiple times
should be decided by considering the transport
environment to minimize the packaging cost.
5.6.2 For the sake of efficiency during holding and
transport, it is preferable to have only one or two
cushions per secondary container.
5.6.3 The materials for the cushions should be
recyclable after the designated number of uses is
completed.
5.7 Pallet
5.7.1 Pallets must be stand-alone components and are
not integrated with secondary containers.
5.7.2 Considering space efficiency of ocean freight
containers, it is preferable that the pallet size be 1130
mm max on at least one side.
5.7.3 Palletized containers must be banded and film-
wrapped.
5.7.4 Pallet material must meet transportation industry
requirements and allow for reuse and recycle after end
of useful life.
5.7.5 Pallets must be able to be accessed by a forklift
from at least two directions.
5.8 Shipment Documentation
5.8.1 English should be used for all international
shipment documentation. The local language may be
used only for domestic shipments only.
5.8.2 Packing list and customs invoice (if required)
should be located on the outside of container number 1
with a sufficient number of copies to ensure the
customer receives one copy.
5.8.3 Customs invoices must meet appropriate
government regulations. Key content items are: PO
number, product description, price, shipping address,
and cross-reference to packing list.
5.8.4 The packing list must
contain: date, customer
shipping address, supplier name, country of origin, PO
number, customer part number, shipment quantity, total
number of cartons, carton identifiers.
5.8.5 The certificate of analysis or conformance should
be electronically transmitted from wafer supplier to
customer. Electronic transmission format must be
flexible to allow for future content changes.
SEMI M45-0703 © SEMI 2001, 2003 4
5.9 Transportation Logistics
5.9.1 Small quantity shipments or expedited shipments
may require a special secondary container size.
5.9.2 The 300 mm wafer shipping system design must
comprehend both surface and air transportation.