semi合集-English.pdf - 第7759页

SEMI T12-0305 © SEMI 2004, 2005 38 10.2.10.9 u pdateOccupancy — This service is used to fluctuat e number of available unoccupie d space on PublicLocation. Following table d efines its parameters. Table 95 Parameter Req/…

100%1 / 7923
SEMI T12-0305 © SEMI 2004, 2005 37
10.2.10.3 showName — This service is used to inquire human friendly name of PublicLocation. Following table
defines its parameters.
Table 89
Parameter Req/Ind Rsp/Conf Description
LocationName - M Given name of possible location for Attachment.
ServiceStatus - M Result of service request.
10.2.10.4 changeName — This service is used to replace human friendly name of PublicLocation. Following table
defines its parameters.
Table 90
Parameter Req/Ind Rsp/Conf Description
LocationName M - New name of possible location for Attachment.
ServiceStatus - M Result of service request.
10.2.10.5 showLocationType — This service is used to inquire type of PublicLocation. Following table defines its
parameters.
Table 91
Parameter Req/Ind Rsp/Conf Description
LocationType - M Type of PublicLocation.
ServiceStatus - M Result of service request.
10.2.10.6 showPossibleTypes — This service is used to inquire acceptable Attachment types for the Public
Location. Following table defines its parameters.
Table 92
Parameter Req/Ind Rsp/Conf Description
AttachmentType - M Acceptable type of Attachment (maybe list).
ServiceStatus - M Result of service request.
10.2.10.7 showCapacity — This service is used to inquire maximum number of occupancy of Attachment for
Public Location. Following table defines its parameters.
Table 93
Parameter Req/Ind Rsp/Conf Description
Capacity - M Maximum number of acceptable Attachment on Public Location.
ServiceStatus - M Result of service request.
10.2.10.8 showAvailableSpace — This service is used to inquire number of available additional occupants on the
Public Location for Attachment. Following table defines its parameters.
Table 94
Parameter Req/Ind Rsp/Conf Description
Space - M Open space for possible Attachments on PublicLocation.
ServiceStatus - M Result of service request.
SEMI T12-0305 © SEMI 2004, 2005 38
10.2.10.9 updateOccupancy — This service is used to fluctuate number of available unoccupied space on
PublicLocation. Following table defines its parameters.
Table 95
Parameter Req/Ind Rsp/Conf Description
Occupancy M - Number of occupancy to increase or decrease.
ServiceStatus - M Result of service request.
10.2.10.10 showAttachments — This service is used to inquire a list of Attachments occupying on PublicLocation.
Following table defines its parameters.
Table 96
Parameter Req/Ind Rsp/Conf Description
AttachmentId - M Identification of Attachment (maybe list).
ServiceStatus - M Result of service request.
10.2.10.11 showState — This service is used to inquire occupancy state of Public Location. Following table defines
its parameters.
Table 97
Parameter Req/Ind Rsp/Conf Description
State - M State of Public Location.
ServiceStatus - M Result of service request.
10.2.10.12 updateState — This service is used to update occupancy state of Public Location in order to follow
reality of corresponding Attachment on equipment. Following table defines its parameters.
Table 98
Parameter Req/Ind Rsp/Conf Description
State M - New state of PublicLocation.
ServiceStatus - M Result of service request.
10.2.10.13 Parameter List — Above services use following parameters.
Table 99
Parameter Definition Form
AttachmentId Identification of Attachment: usually equivalent to physical ID
maybe tagged on physical attachment.
Text.
AttachmentType Type of Attachment: at least jig or implement, and based on
attachments’ compatibility. Further classification is dependent on
manufacturer, attachment, equipment or strategy of its user.
Enumerated.
Capacity Maximum number of occupant available on Public Location. Value.
LocationId Identification of PublicLocation. If stock has logical or physical
partitions, their locations may be differently identified. If a piece of
equipment has more than one locations for different Attachment
types, their locations may be differently identified.
Text.
LocationName Human friendly name of PublicLocation. Text.
SEMI T12-0305 © SEMI 2004, 2005 39
Parameter Definition Form
LocationType Type of PublicLocation. At lease it is classified into ‘Stock’ and
‘Equipment’. If stock has logical or physical partitions, their types
may different LocationTypes. If a piece of equipment has more than
one locations, they may be different LocatuinTypes.
Text.
Space Number of available free position for possible Attachment. Value.
Occupancy Fluctuation number of occupants for PublicLocation: positive for
increment and negative for decrement.
Value.
ServiceStatus Result of service to show successful or reason of failure. Text.
State Occupancy state of PublicLocation object. Text.
10.2.11 Secondment — Following tables defines services of Secondment class.
10.2.11.1 Service List — Secondment class has following services.
Table 100
Operation Description Type Reqd
ShowId Inquires secondment’s identification. R Y
showName Inquires secondment’s name. R Y
changeName Substitutes secondment’s name. R Y
showType Inquires type of the secondment. R Y
showState Inquires state information. R Y
Destruct Destruct a Secondment object. R Y
10.2.11.2 showId — This service is used to inquire Secondment’s identification. Following table defines its
parameters.
Table 101
Parameter Req/Ind Rsp/Conf Description
AttachmentId - M Identification of Secondment.
ServiceStatus - M Result of service request.
10.2.11.3 showName — This service is used to inquire human friendly name of Secondment. Following table
defines its parameters.
Table 102
Parameter Req/Ind Rsp/Conf Description
AttachmentName - M Given human friendly name of Secondment.
ServiceStatus - M Result of service request.
10.2.11.4 changeName — This service is used to replace human friendly name of Secondment. Following table
defines its parameters.
Table 103
Parameter Req/Ind Rsp/Conf Description
AttachmentName M - New name of Secondment.
ServiceStatus - M Result of service request.