semi合集-English.pdf - 第1976页

SEMI E54.4-0704 © SEMI 1997, 2004 11 DeviceNet Statement of Compliance Identity Object 0x01 Object Class ID Description Get Set Value Limits DeviceNet Required Object Implementation Attributes Open 1 Revision ❑ ❑ _______…

100%1 / 7923
SEMI E54.4-0704 © SEMI 1997, 2004 10
DeviceNet Statement of Compliance
Complete this form using the definitions previously outlined.
Fill in the blank or X the appropriate box
Conforms to DeviceNet Specification Volume I - Release _____________________
Volume II - Release _____________________
Vendor Name _____________________
Device Profile Name _____________________
Product Catalog Number _____________________
General
Device
Data
Product Revision _____________________
Network Power Consumption (Max) _______A @ 11V dc (worst case)
Connector Style Open-Hardwired ❑ Sealed-Mini ❑
DeviceNet
Physical
Conformance
Data
Open-Pluggable ❑ Sealed-Micro ❑
Isolated Physical Layer Yes ❑
No ❑
LEDs Supported Module ❑ Combo Mod/Net ❑
Network ❑ I/O ❑
DIP Switch ❑ Software-Settable ❑
Other__________________________________________________
Default MAC ID _____________________
Communication Rate Setting DIP Switch ❑ Software-Settable ❑
Other__________________________________________________
Communication Rates Supported 125k bit/s
❑ 500k bit/s ❑
250k bit/s ❑
❑ Predefined Master/Slave Connection
Set
Group 2 Client ❑ Group 2 Only Client ❑
DeviceNet
Communication
Data
Group 2 Server ❑ Group 2 Only Server ❑
❑ Dynamic Connections Supported
(UCMM)
Group 1 ❑ Group 3 ❑
Group 2 ❑
Fragmented Explicit Yes ❑
Messaging Implemented No ❑
If yes, Transmission Time Out_______________________ms
Typical Target Address Class___________________
Instance_________________
Attribute_________________
X Get to indicate that attribute value is returned by the use of Get_Attribute_Single service.
X Set to indicate that attribute value is written to by the use of Set_Attribute_Single service.
F_ 1
SEMI E54.4-0704 © SEMI 1997, 2004 11
DeviceNet Statement of Compliance
Identity Object 0x01
Object Class ID Description Get Set Value Limits
DeviceNet
Required
Object
Implementation
Attributes Open 1 Revision ❑ ❑ ___________________
2 Max instance ❑ ❑ ___________________
❑ None Supported 6 Max ID of class attributes ❑ ❑ ___________________
7 Max ID of instance
attributes
❑ ❑ ___________________
DeviceNet Services Parameter Options
Services ❑ Get_Attribute_All ____________________________
❑ Reset ____________________________
❑ None Supported ❑ Get_Attribute_Single ____________________________
❑ Find_Next_Object_Instance ____________________________
Object Instance ID Description Get Set Value Limits
Attributes Open 1 Vendor ❑ ❑ ___________________
2 Product type ❑ ❑ ___________________
❑ None Supported 3 Product code ❑ ❑ ___________________
4 Revision ❑ ❑ ___________________
5 Status ❑ ❑ ___________________
6 Serial number ❑ ❑ ___________________
7 Product name ❑ ❑ ___________________
___________________
8 State ❑ ❑ ___________________
DeviceNet Services Parameter Options
Services ❑ Reset ___________________________
❑ Get_Attribute_All ___________________________
❑ None Supported
Vendor-Specific Additions If yes, fill out the Vendor-Specific Yes ❑
Additions form on page F_7. No ❑
X Get to indicate that attribute value is returned by the use of Get_Attribute_Single service.
X Set to indicate that attribute value is written to by the use of Set_Attribute_Single service.
F_ 2
SEMI E54.4-0704 © SEMI 1997, 2004 12
DeviceNet Statement of Compliance
Message Router Object 0x02
Object Class ID Description Get Set Value Limits
Attributes Open 1 Revision ❑ ❑ ___________________
4 Optional attribute list ❑ ❑ ___________________
DeviceNet
Required
Object
Implementation
❑ None Supported 5 Optional service list ❑ ❑ ___________________
6 Max ID of class attributes ❑ ❑ ___________________
7 Max ID of instance
attributes
❑ ❑ ___________________
DeviceNet Services Parameter Options
Services ❑ Get_Attribute_all ____________________________
❑ Get_Attribute_Single ____________________________
❑ None Supported
Object Instance ID Description Get Set Value Limits
Attributes Open 1 Object list ❑ ❑ ___________________
2 Maximum connections
supported
❑ ❑ ___________________
❑ None Supported
3 Number of active
connections
❑ ❑ ___________________
4 Active connections list ❑ ❑ ___________________
DeviceNet Services Parameter Options
Services ❑ Get_Attribute_All ____________________________
❑ Get_Attribute_Single ____________________________
❑ None Supported
Vendor-Specific Additions If yes, fill out the Vendor-Specific Yes ❑
Additions form on page F_7. No ❑
X Get to indicate that attribute value is returned by the use of Get_Attribute_Single service.
X Set to indicate that attribute value is written to by the use of Set_Attribute_Single service.
F_ 3