semi合集-English.pdf - 第2121页

SEMI E54.14-0305 © SEMI 2005 15 Table 16 Active Element Service Ma pping SEMI CDM Service ID Service Write Value to Index 64 nS4 Get Attribute Mapped as Read from Attribute Index nS5 Set Attribute Mapped as Write to Attr…

SEMI E54.14-0305 © SEMI 2005 14

7.6.1.2 The other services are mapped to a write at an UINT Object addressed with Index 96 as described in Table 2

and Table 14.

7.6.1.3 A read to Index 96 will return the last command executed successfully.

Table 14 DM Service Mapping

SEMI CDM Service ID Service Write Value to Index 96

DmS4 Get Attribute Mapped as Read from Attribute Index

DmS5 Set Attribute Mapped as Write to Attribute Index

DmS1 Reset 0

DmS2 Abort 1

DmS3 Recover 2

DmS6 Execute 3

DmS7 Perform Diagnostics 4

DmS8 – DmS12 Optional Services are not mapped in PROFINET

7.6.2 SAC Services

7.6.2.1 Get_Attribute and Set_Attribute are mapped to Read and Write services with Slot and Index as described in

¶¶ 7.2 and 7.4.

7.6.2.2 The other services are mapped to a write at an UINT Object addressed with Index 64 as described in Table 2

and Table 15.

7.6.2.3 A read to Index 64 will return the last command executed successfully (Exception: Restore Default is not

mirrored).

Table 15 SAC Service Mapping

SEMI CDM Service ID Service Write Value to Index 64

SacS4 Get Attribute Mapped as Read from Attribute Index

SacS5 Set Attribute Mapped as Write to Attribute Index

SacS1 Reset 0

SacS2 Abort 1

SacS3 Recover 2

SacS6 Operate 3

SacS7 Restore Default 4

SacS8 Publish Attribute Optional Service not mapped in PROFINET

7.6.3 Active Element Services

7.6.3.1 Get_Attribute and Set_Attribute are mapped to Read and Write services with Slot and Index as described in

¶¶ 7.2 and 7.4.

7.6.3.2 The other services are mapped to a write at an UINT Object addressed with Index 64 as described in Table 2

and Table 16.

7.6.3.3 A read to Index 64 will return the last command executed successfully (Exception: Restore Default is not

mirrored).

SEMI E54.14-0305 © SEMI 2005 15

Table 16 Active Element Service Mapping

SEMI CDM Service ID Service Write Value to Index 64

nS4 Get Attribute Mapped as Read from Attribute Index

nS5 Set Attribute Mapped as Write to Attribute Index

nS1 Reset 0

nS2 Abort 1

nS3 Recover 2

nS6 Operate 3

nS7 Restore Default 4

7.7 PROFINET Device Data Base

7.7.1 The specification of the Device Data Base (or GSD file) for a given SDM is beyond the scope of this

document. The PROFIBUS Trade Organization is responsible for the management of these files.

Table 17 DM Object Attribute Identifiers

SEMI CDM

Attribute ID

PROFINET Attribute ID Attribute Detail/Alternative Access Method

DmA1 IM0, DEVICE_ID Device Type 8 Octets significant

DmA2 IM0, REVISION_COUNTER Standard Revision Level Shall be an UINT type

DmA3 IM0, MANUFACTURER_ID Device Manufacturer Identifier Shall be an UINT type, the number

is resolved via file from

www.profibus.com to supply with

web pages and phone numbers

DmA4 IM0, ORDER_ID Manufacturer Model Number

DmA5 IM0, SOFTWARE_REVISION Software or Firmware Revision Level

DmA6 IM0, HARDWARE_REVISION Hardware Revision Level

DmA7 IM0, SERIAL_NUMBER Serial Number 16 Octets maximum

DmA8 IM3 Device Configuration

DmA9 IM17, octet 10-11 Device Status Additional as Status Diagnosis

DmA10 IM16, octet 10-11 Reporting Mode

DmA11 IM16, octet 12-13 Exception Status Report Interval

DmA12 IM17, octet 12-13 Exception Status Additional as Status Diagnosis

DmA13 Slot 0 Index 0xe00b Exception Detail Alarm Additional as Diagnosis Alarm

DmA14 Slot 0 Index 0xe00b Exception Detail Warning Additional as Diagnosis Alarm

DmA15 Optional Attribute not mapped Visual Indicator N/A

DmA16 Context Alarm Enable Put into a Parameter Data Record

DmA17 Context Warning Enable Put into a Parameter Data Record

DmA18 Optional Attribute not mapped Exception Detail Type N/A

DmA19 Optional Attribute not mapped Exception Detail Alarm Queue N/A

DmA20 Optional Attribute not mapped Exception Detail Warning Queue N/A

DmA21 Optional Attribute not mapped Date and Time N/A

DmA22 Optional Attribute not mapped Date and Time Type N/A

DmA23-

DmA31

Reserved Reserved N/A

8 Protocol Compliance

8.1 PROFIBUS International has established a qualified certification system, with test laboratories in Europe, Asia

and North America, which includes conformance testing and interoperability testing (address list can be found at

SEMI E54.14-0305 © SEMI 2005 16

http://www.PROFIBUS.com/support.html

). Certified products are listed with their certificate number in the

Electronic Product Guide.

8.2 GSD files of all PROFINET devices that are tested for their conformity to the PROFIBUS standard are

available in the GSD library on the World Wide Web Server of the PROFIBUS User Organization at

http://www.PROFIBUS.com.

9 Specific Device Model Mappings

9.1 Every type of device shall have an identifier number. Vendors must apply for an identifier number from the

PROFIBUS User Organization. A Device Profile shall be submitted in the form of a GSD File and Device Data

Base Sheet.

9.2 The Device Profile must specify the identifiers for Objects, Attributes and Services for CDM and SDM

components, including data formats and bit mappings for specified parameters, as represented in this document.

9.3 The following sections specify mappings for Sensor Actuator Network Specific Device Models.

9.4 Mass Flow Device

9.4.1 Reference SEMI E54.3 for a complete specification of the SDM for Mass Flow Devices (MFD).

9.4.2 Objects

9.4.2.1 Consistent with SEMI E54.3 and ¶7.4 above, the DM and SAC objects are identified as Object 1 and Object

2, respectively.

9.4.2.2 Notice that references for the Local Link Objects are not included; the existence of these objects are implied

by behavior and not explicitly included. Therefore, these objects are not accessible from the network.

9.4.2.3 Table 18 shows the mapping of the SDM.

9.4.2.4 Objects specified in SEMI E54.3 are listed under the heading NCS Module ID. Every instance is allocated

to a slot number. The configuration can be modeled in the GSD by using the Module ID as key for the module

description.

Table 18 Mass Flow Device Object Identifiers

SDM Object

Name

SDM Object ID NCS Module ID

Sensor-AI-MF MFD3 103

Sensor-AI-AT MFD4 104

Assembly-MFM MFD5 105

Sensor-AI-Aux MFD6 106

Actuator-AO-MF MFD7 107

Controller MFD8 108

Local Link MFD9 109

SISO MFD10 110

SISO-Setpoint MFD11 111

Assembly-MFC MFD12 112

9.4.3 Attributes

9.4.3.1 The mapping of Attribute Tags and Identifiers is defined in §7 for SAC. The same method applies here for

the SDM.

9.4.3.2 Tables 19–23 show the mapping of the specific SDM attributes.

5 Website maintained by PROFIBUS International.