semi合集-English.pdf - 第2091页

SEMI E54.11-0301 © SEMI 2 001 14 # Current St ate Trigger New State Action Comme nt 8 ENDP OINT OFF Endpoi nt Suspe nd, or Endpoi nt Resum e reques t ENDPOINT OFF Error res ponse Endpoint e vent process remain s off. 9 E…

100%1 / 7923
SEMI E54.11-0301 © SEMI 200113
# Current State Trigger New State Action Comment
2 ENDPOINT
FAILURE
Perform Diagnostics or
Reset service request
received and device
determines that the
failure no longer exists
or the Endpoint device
detects replacement of
electronics that caused
the failure
ENDPOINTING /
ENDPOINT OFF
Set Status attribute to
appropriate value.
Endpoint moves to
ENDPOINT OFF
state.
3 ENDPOINTING Endpoint device detects
an endpoint electronics
failure
Conditional:
ENDPOINT
FAILURE or
ENDPOINTING /
EDNDPOINT OFF
Set State attribute to
appropriate value.
The setting of the
Status attribute is
manufacturer
specific.
4 ENDPOINT
FAILURE
Endpoint Off, Endpoint
On, Endpoint Start,
Endpoint Resume,
Endpoint Suspend,
Download Recipe,
Upload Recipe, and
Calibrate request
ENDPOINT
FAILURE
Error response Object cannot move
to ENDPOINTING /
ENDPOINT OFF
state until the
electronics are
repaired.
5 ENDPOINT
OFF
Endpoint On request Conditional:
ENDPOINT ON /
ENDPOINT IDLE
or
ENDPOINT ON /
ENDPOINT IN
PROCESS
If ENDPOINT IDLE
supported: Take the
object from the
ENDPOINT OFF
state to the
ENDPOINT IDLE
state and wait for an
Endpoint Start
request. Recipe
parameter downloads
are allowed.
If ENDPOINT IDLE
is not supported: Take
the object from the
ENDPOINT OFF
state immediately to
the ENDPOINT IN
PROCESS state and
begin the endpoint
detection event
process. Set the
Status attribute to the
appropriate values
throughout the
transition. Issue an
Endpoint On response.
ENDPOINT IDLE is
an optional
intermediate state
between ENDPOINT
OFF and
ENDPOINT IN
PROCESS.
Endpoint electronics
must not be in
failure. Service
response is not
issued until transition
to ENDPOINT IDLE
or ENDPOINT IN
PROCESS is
completed.
6 ENDPOINT ON Endpoint Off request ENDPOINT OFF Stop the “endpoint”
detection event
process. Issue an
Endpoint Off
response.
This results in the
same state transition
as when a valid
Abort service request
is issued to the
device.
7 ENDPOINT
OFF
Endpoint Off request ENDPOINT OFF Error response Endpoint is already
off.
SEMI E54.11-0301 © SEMI 2001 14
# Current State Trigger New State Action Comment
8 ENDPOINT
OFF
Endpoint Suspend, or
Endpoint Resume
request
ENDPOINT OFF Error response Endpoint event
process remains off.
9 ENDPOINT
OFF
Endpoint On or
Endpoint Start request.
Endpoint is unable to
turn on properly.
ENDPOINT OFF Endpoint attempts to
take the object from
the ENDPOINT OFF
state to an
ENDPOINT ON state.
Endpoint won’t turn
on properly. Turn
“endpoint” detection
event process back off
and generate an Error
response.
Behavior associated
with determining that
the endpoint will not
turn on properly is
manufacturer
specific.
10 Entry into
ENDPOINT ON
None Entry state for
ENDPOINT ON
state.
Conditional:
ENDPOINT ON /
ENDPOINT IDLE
or ENDPOINT ON
/ ENDPOINT IN
PROCESS
ENDPOINT IDLE
state entered if
supported; otherwise
ENDPOINT IN
PROCESS state
entered
Entry depends on
endpoint electronics
functioning properly.
11 ENDPOINT
OFF
Endpoint Start request ENDPOINT ON /
ENDPOINT IN
PROCESS
Go immediately to the
ENDPOINT ON /
ENDPOINT IN
PROCESS state and
begin the endpoint
detection event
process. Issue an
Endpoint Start
response
Behavior associated
with determining that
the endpoint will not
turn on properly is
manufacturer
specific.
12 ENDPOINT IN
PROCESS
Endpoint On, Endpoint
Start, Endpoint
Resume, Download
Recipe, Upload Recipe
ENDPOINT IN
PROCESS
Error response Endpoint is already
in process.
13 ENDPOINT IN
PROCESS
Endpoint detection
completed and idle state
supported
ENDPOINT IDLE Endpoint event
detected. Endpoint
event reported.
14 ENDPOINT
IDLE
Endpoint Start Request ENDPOINT IN
PROCESS
Endpoint event
detection process is
started. Issue an
Endpoint Started
success response.
15 ENDPOINT
IDLE
Download Recipe, and
Upload Recipe Request
ENDPOINT IDLE Valid recipes are
Downloaded or
Uploaded and a
services response is
generated.
16 ENDPOINT
IDLE
Endpoint Suspend and
Endpoint Resume
request
ENDPOINT IDLE Error response Endpoint is not in
process so it can not
be suspended.
SEMI E54.11-0301 © SEMI 200115
# Current State Trigger New State Action Comment
17 ENDPOINT IN
PROCESS
Endpoint detection
failed
Conditional:
ENDPOINTING
ON / ENDPOINT
IDLE or
ENDPOINTING /
ENDPOINT OFF
Endpoint event not
detected within the
allotted endpoint
active timers.
Endpoint event failure
reported.
18 ENDPOINT IN
PROCESS
Endpoint Suspend
request and service
supported
ENDPOINT
SUSPENDED
Take the object from
the ENDPOINT IN
PROCESS state to
ENDPOINT
SUSPENDED state,
turning off the
endpoint event
process. All active
endpoint timers are
held at their current
values. Set the Status
attribute to the
appropriate value.
Issue an Endpoint
Suspended response
and stop the
“endpoint” detection
process.
Endpoint event
process is temporally
suspended. All
timers are suspended.
19 ENDPOINT
SUSPENDED
Endpoint Resume
request
ENDPOINT IN
PROCESS
Take the object from
ENDPOINT
SUSPENDED state to
ENDPOINT IN
PROCESS. Begin the
“endpoint” detection
event process form the
point it was
suspended. All active
endpoint timers are
reinstated to their last
held values. Issue an
Endpoint Resume
response.
Endpoint event
process is resumed
from the point it was
suspended.
20 ENDPOINT
SUSPENDED
Endpoint On, Endpoint
Start, Endpoint
Suspend , Download
Recipe, Upload Recipe
request
ENDPOINT
SUSPENDED
Error response Endpoint event
process remains
suspended.
21 ENDPOINT ON Endpoint On, Endpoint
Start, Endpoint
Resume, Download
Recipe, and Upload
Recipe request
ENDPOINT ON Error response Endpoint detection
event process
remains on and
continues endpoint
process from its
current attribute
settings.
22 ENDPOINT
OFF
Download Recipe or
Upload Recipe request
ENDPOINT OFF Valid recipes are
Downloaded or
Uploaded and a
services response is
generated.