semi合集-English.pdf - 第1975页
SEMI E54.4-0704 © SEMI 1997, 2004 10 DeviceNet Statement of Compliance Complete this fo rm using the definitions previously outlined. Fill in the blank or X the appropriate box Conforms to DeviceNet Specif ication Volume…
SEMI E54.4-0704 © SEMI 1997, 2004 9
APPENDIX 1
PROTOCOL SPECIFICATION SHEETS
NOTICE: This appendix is not an official part of SEMI E54.4 and is not intended to modify or supercede the
official standard. Determination of the suitability of the material is solely the responsibility of the user. This
appendix contains a set of protocol specification sheets. Compliance to this NCS necessarily requires adherence to
this set of protocol specification sheets (see Section 8.1).
A1-1 The protocol specification set of sheets contains the following components:
• A General Device Data/Physical ConformanceData/ DeviceNet Communication Data statement of compliance.
(Form F_1, 1 page.)
• DeviceNet required object implementation statements of compliance (for Identity, Message Router, and
DeviceNet objects, see Section 7). (Forms F_2 through F_5, 4 pages.)
• NCS - DeviceNet required object implementation statements of compliance (for Device Manager and
Sensor/Actuator/Controller objects, see Section 7). (Form F_6, 2 pages.)
• Open object- and vendor- specific implementation templates (for utilization by SDMs, vendors, etc.). (Forms
F_6 through F_7, 2 pages.)
A1-1.1 Note that these protocol specification sheets are aligned with DeviceNet specifications for “Statement of
Compliance” documentation, available with the DeviceNet specification from ODVA. Detailed instructions on
completing these forms are in this “Statement of Compliance” documentation. The set of protocol specification
sheets begins on the following page.
SEMI E54.4-0704 © SEMI 1997, 2004 10
DeviceNet Statement of Compliance
Complete this form using the definitions previously outlined.
Fill in the blank or X the appropriate box
Conforms to DeviceNet Specification Volume I - Release _____________________
Volume II - Release _____________________
Vendor Name _____________________
Device Profile Name _____________________
Product Catalog Number _____________________
General
Device
Data
Product Revision _____________________
Network Power Consumption (Max) _______A @ 11V dc (worst case)
Connector Style Open-Hardwired ❑ Sealed-Mini ❑
DeviceNet
Physical
Conformance
Data
Open-Pluggable ❑ Sealed-Micro ❑
Isolated Physical Layer Yes ❑
No ❑
LEDs Supported Module ❑ Combo Mod/Net ❑
Network ❑ I/O ❑
DIP Switch ❑ Software-Settable ❑
Other__________________________________________________
Default MAC ID _____________________
Communication Rate Setting DIP Switch ❑ Software-Settable ❑
Other__________________________________________________
Communication Rates Supported 125k bit/s
❑ 500k bit/s ❑
250k bit/s ❑
❑ Predefined Master/Slave Connection
Set
Group 2 Client ❑ Group 2 Only Client ❑
DeviceNet
Communication
Data
Group 2 Server ❑ Group 2 Only Server ❑
❑ Dynamic Connections Supported
(UCMM)
Group 1 ❑ Group 3 ❑
Group 2 ❑
Fragmented Explicit Yes ❑
Messaging Implemented No ❑
If yes, Transmission Time Out_______________________ms
Typical Target Address Class___________________
Instance_________________
Attribute_________________
X Get to indicate that attribute value is returned by the use of Get_Attribute_Single service.
X Set to indicate that attribute value is written to by the use of Set_Attribute_Single service.
F_ 1
SEMI E54.4-0704 © SEMI 1997, 2004 11
DeviceNet Statement of Compliance
Identity Object 0x01
Object Class ID Description Get Set Value Limits
DeviceNet
Required
Object
Implementation
Attributes Open 1 Revision ❑ ❑ ___________________
2 Max instance ❑ ❑ ___________________
❑ None Supported 6 Max ID of class attributes ❑ ❑ ___________________
7 Max ID of instance
attributes
❑ ❑ ___________________
DeviceNet Services Parameter Options
Services ❑ Get_Attribute_All ____________________________
❑ Reset ____________________________
❑ None Supported ❑ Get_Attribute_Single ____________________________
❑ Find_Next_Object_Instance ____________________________
Object Instance ID Description Get Set Value Limits
Attributes Open 1 Vendor ❑ ❑ ___________________
2 Product type ❑ ❑ ___________________
❑ None Supported 3 Product code ❑ ❑ ___________________
4 Revision ❑ ❑ ___________________
5 Status ❑ ❑ ___________________
6 Serial number ❑ ❑ ___________________
7 Product name ❑ ❑ ___________________
___________________
8 State ❑ ❑ ___________________
DeviceNet Services Parameter Options
Services ❑ Reset ___________________________
❑ Get_Attribute_All ___________________________
❑ None Supported
Vendor-Specific Additions If yes, fill out the Vendor-Specific Yes ❑
Additions form on page F_7. No ❑
X Get to indicate that attribute value is returned by the use of Get_Attribute_Single service.
X Set to indicate that attribute value is written to by the use of Set_Attribute_Single service.
F_ 2