semi合集-English.pdf - 第4910页

SEMI M8-0703 © SEMI 1984, 2003 7 Table 4 Specifications for Larg e Diameter Silicon Test Wafers Item Specification CLASSIFICATION MECHANICAL PROCESS 1.0 General Characteristics 1.1 Growth Method CZ or MCZ CZ or MCZ 1.2 C…

100%1 / 7923
SEMI M8-0703 © SEMI 1984, 2003 6
Item Specification
CLASSIFICATION
A B C
Zinc Optional Unspecified Unspecified
7.2 Surface Organics Optional Unspecified Unspecified
8.0
Front Surface Visual Characteristics
8.1 Scratches (# of) Unspecified
(cumulative length) R/5 R/2 Unspecified
8.2 Pits None Unspecified
8.3 Haze None Unspecified
8.4 Localized Light Scatterers
(Density per square meter with 4 mm edge exclusion)
2 inch
≤1900 ≤5000
Unspecified
3 inch
≤1900 ≤5000
Unspecified
100 mm
≤1900 ≤5000
Unspecified
125 mm
≤1900 ≤5000
Unspecified
8.5 Contamination/area None Unspecified
8.6 Edge Chips None Unspecified
8.7 Edge Cracks None Unspecified
8.8 Cracks, Crow's feet None Unspecified
8.9 Craters None Unspecified
8.10 Dimples None Unspecified
8.11 Grooves None Unspecified
8.12 Mounds None Unspecified
8.13 Orange Peel None Unspecified
8.14 Saw Marks None Unspecified
8.15 Dopant Striation Rings None Unspecified
8.16 Stains None Unspecified
9.0
Back Surface Characteristics
9.1 Edge Chips None Unspecified
9.2 Cracks, Crow's feet None Unspecified
9.3 Contamination/Area None Unspecified
9.4 Saw Marks None Unspecified
9.5 Stains None Unspecified
9.6 Roughness Unspecified
9.7 Brightness (gloss) Unspecified
TBD
(NOTE 1)
Back Surface Finish Unspecified
NOTE 1: A revision to SEMI M18 to provide this item number is being developed. When this revision is completed, this specification will be
revised to include the assigned item number from SEMI M18.
SEMI M8-0703 © SEMI 1984, 2003 7
Table 4 Specifications for Large Diameter Silicon Test Wafers
Item Specification
CLASSIFICATION
MECHANICAL PROCESS
1.0
General Characteristics
1.1 Growth Method CZ or MCZ CZ or MCZ
1.2 Crystal Orientation Unspecified User specified
1.3 Conductivity Type Unspecified [ ]P or [ ]N
1.4 Dopant Unspecified [ ]Boron [ ]Phosphorus
1.5 Nominal Edge Exclusion
Distance for FQA
3 mm
2.0
Electrical Characteristics
2.1 Resistivity Unspecified
≥1 Ω·cm
2.2 Radial Resistivity Variation (RRG) Unspecified
2.3 Resistivity Striations Unspecified
2.4 Minority Carrier Lifetime Unspecified
3.0
Chemical Characteristics
3.1 Oxygen Concentration Unspecified
3.2 Radial Oxygen Variation Unspecified
3.3 Carbon Concentration Unspecified
4.0
Structural Characteristics
4.1 Dislocation Etch Pit Density Unspecified < 500/cm
2
4.2 Slip Unspecified None
4.3 Lineage Unspecified None
4.4 Twins Unspecified None
4.5 Swirl Unspecified
4.6 Shallow Pits Unspecified
4.7 OISF Unspecified
4.8 Oxide Precipitates Unspecified
5.0
Wafer Preparation Characteristics
5.1 Wafer ID Marking Optional
5.2 Front Surface Thin Films Unspecified
5.3 Denuded Zone Unspecified
5.4 Extrinsic Gettering Unspecified
5.5 Backseal Unspecified
5.6 Annealing Unspecified
6.0
Mechanical Characteristics
6.1 Diameter
150 mm ± SEMI M1.8 or SEMI M1.13
200 mm ± SEMI M1.9 or SEMI M1.10
300 mm ± SEMI M1.15
6.2 Primary Flat Dimension
(or Notch Depth)
150 mm (flat length) SEMI M1.8 or SEMI M1.13
SEMI M8-0703 © SEMI 1984, 2003 8
Item Specification
CLASSIFICATION
MECHANICAL PROCESS
200 mm (notch depth) SEMI M1.9
200 mm (flat diameter) SEMI M1.10
300 mm (notch depth) SEMI M1.15
6.3 Primary Flat/Notch Orientation SEMI M1
6.4 Secondary Flat Length SEMI M1.8 or SEMI M1.13 (150 mm) or SEMI M1.10 (200 mm)
Secondary Flat Length (300 mm) None
6.5 Secondary Flat Location SEMI M1
6.6 Edge Profile 5.2 of SEMI M1
6.7 Thickness
150 mm (SEMI M1) SEMI M1.8 or SEMI M 1.13
200 mm (notched or flatted) SEMI M1.9 or SEMI M1.10
300 mm SEMI M1.15
6.8 Thickness Variation (TTV) Unspecified
6.9 Surface Orientation
(for all diameters up to 200 mm)
Unspecified
Surface Orientation (for 300 mm) Unspecified
6.10 Bow Unspecified
6.11 Warp Unspecified
6.12 Sori Unspecified
6.13 Flatness/Global Unspecified
6.14 Flatness/Site Unspecified
7.0
Front Surface Chemistry
7.1 Surface Metal Concentration Unspecified See Note 1.
8.0
Front Surface Visual
Characteristics
8.1A Scratches (macro) – total length Unspecified None
8.1B Scratches (micro) – total length Unspecified
≤ 0.10 × Diameter
8.2 Pits Unspecified None
8.3 Haze Unspecified None
8.4 Localized Light Scatterers
Unspecified See Note 2.
150 mm Unspecified
≤ 0.20/cm
2
@ ≥ 0.20 µm
200 mm Unspecified
≤ 0.20/cm
2
@ ≥ 0.20 µm
300 mm Unspecified
≤ 0.20/cm
2
@ ≥ 0.20 µm
8.5 Contamination/area Unspecified None
8.6 Edge Chips Unspecified None
8.7 Edge Cracks Unspecified None
8.8 Cracks, Crow’s feet Unspecified None
8.9 Craters Unspecified None
8.10 Dimples Unspecified None
8.11 Grooves Unspecified None
8.12 Mounds Unspecified None
8.13 Orange Peel Unspecified None
8.14 Saw Marks Unspecified None