semi合集-English.pdf - 第6132页
SEMI G28-0997 © SE MI 1986, 1997 4 Table 1 0.150 WID E 0.30 WID E (J -COMPATI BLE) 81 4 1 6 1 4 1 6 1 82 02 42 8 MATERIAL GAGE 0.008" (0.200 m m) 0.008 (0.200) 0.008 (0.200) 0.010 (0.250) 0.010 (0.250) 0.010 (0.250)…
SEMI G28-0997 © SEMI 1986, 19973
10 Packaging, Marking, and Packing List
10.1 Packaging — The shipping containers and
materials shall be suitably designed to provide the
leadframes with protection against normal
transportation damage risks which include crushing and
spillage, and exposure to moisture and other corrosive
gases.
10.1.1 The inner packaging materials for cut strips
must not cause particulate contamination on the
leadframes and shall be clean room compatible as
defined by the customer. The leadframes boxes shall be
vacuum sealed in a bag with a desiccant. If the
leadframes are to be delivered in coil form, the coil
diameter shall be set in the purchase order (see SEMI
G9).
10.2 Marking
10.2.1 Internal Packages — Each internal package
shall be clearly marked with the following information,
as appropriate:
a. Customer’s part number
b. Customer’s purchase order number
c. Drawing number (customer’s and/or vendor’s, as
requested by customer)
d. Vendor’s shipping lot number
e. Quantity
f. Date of Manufacture
g. Any agreed upon certification data
10.2.2 External Packages — The packing list on the
outside of the external package shall contain the
following information:
a. Customer’s part number
b. Customer’s purchase order number
c. Quantity
d. Shipping Date
e. Any specific instructions for receiving dock
personnel
11 Certification
11.1 Upon request of the customer in the contract or
purchase order, a vendor’s certification that the product
was manufactured and tested in accordance with this
specification, together with a report of the test results
shall be furnished at the time of shipment. However, if
the customer does perform inspection and test on a
certified shipment and the product fails to meet the
requirements, the product shall be subject to rejection.
11.2 If the customer and vendor agree, the product
may be certified as capable of meeting this
specification. In this context, capable of meeting
signifies that the vendor is not required to perform all
the inspections and tests. However, if the customer does
perform inspection and test on a certified shipment and
the product fails to meet the requirements, the product
shall be subject to rejection.
SEMI G28-0997 © SEMI 1986, 1997 4
Table 1
0.150 WIDE 0.30 WIDE (J-COMPATIBLE)
81416141618202428
MATERIAL
GAGE
0.008"
(0.200 mm)
0.008
(0.200)
0.008
(0.200)
0.010
(0.250)
0.010
(0.250)
0.010
(0.250)
0.010
(0.250)
0.010
(0.250)
0.010
(0.250)
A STRIP WIDTH 0.600
(15.2)
0.600
(15.2)
0.600
(15.2)
0.720
(18.30)
0.720
(18.30)
0.720
(18.30)
0.970
(24.60)
0.970
(24.60)
0.970
(24.60)
B PROGRESSION 0.336
(8.53)
0.336
(8.53)
0.336
(8.53)
0.674
(17.12)
0.674
(17.12)
0.674
(17.12)
0.674
(17.12)
0.674
(17.12)
0.674
(17.12)
CTOOLING
HOLE
0.060
(1.52)
0.060
(1.52)
0.060
(1.52)
0.060
(1.52)
0.060
(1.52)
0.060
(1.52)
DDAMBAR
WIDTH 0
0.010
(.250)
0.010
(.250)
0.010
(.250)
0.010
(.250)
0.010
(.250)
0.010
(.250)
EDAMBAR
DISTANCE
FROM CL
0.079
(2.00)
0.079
(2.00)
0.079
(2.00)
0.156
(4.00)
0.156
(4.00)
0.156
(4.00)
0.156
(4.00)
0.156
(4.00)
0.156
(4.00)
F LEAD LENGTH
CL TO LEAD
RAIL
0.167
(4.24)
0.167
(4.24)
0.167
(4.24)
0.322
(8.18)
0.322
(8.18)
0.322
(8.18)
0.322
(8.18)
0.322
(8.18)
0.322
(8.18)
GPKG. LENGTH
BOUNDARY
0.098
(2.49)
0.172
(4.37)
0.198
(5.03)
0.181
(4.60)
0.198
(5.03)
0.231
(5.87)
0.255
(6.48)
0.307
(7.80)
0.356
(9.04)
HPARTS PER
STRIP (STRIP
LENGTH)
24
(8.064)
24
(8.064)
24
(8.064)
12
(8.088)
12
(8.088)
12
(8.088)
12
(8.088)
12
(8.088)
12
(8.088)
IPAD
DOWNSET
0.008
(0.200)
0.008
(0.200)
0.008
(0.200)
0.012
(0.305)
0.012
(0.305)
0.012
(0.305)
0.012
(0.305)
0.012
(0.305)
0.012
(0.305)
SEMI G28-0997 © SEMI 1986, 19975
Figure 1
Camber
Figure 2
Coil Set
Figure 3
Coined Area