semi合集-English.pdf - 第6358页

15 SEMI G69-0996 © SEMI 1996, 2004 APPENDIX 4 LEADFRAME DESIGN FOR PULL METHOD NOTICE : The material in this appendix is an o fficial part of SEMI G69 and was approved by full letter b allot procedures. Figure A1-4

SEMI G69-0996 © SEMI 1996, 2004 14

Figure A3-3

Temperature Dependence of Adhesion Strength

15 SEMI G69-0996 © SEMI 1996, 2004

APPENDIX 4

LEADFRAME DESIGN FOR PULL METHOD

NOTICE: The material in this appendix is an official part of SEMI G69 and was approved by full letter ballot

procedures.

Figure A1-4

SEMI G69-0996 © SEMI 1996, 2004 16

NOTICE: SEMI makes no warranties or

representations as to the suitability of the standard set

forth herein for any particular application. The

determination of the suitability of the standard is solely

the responsibility of the user. Users are cautioned to

refer to manufacturer’s instructions, product labels,

product data sheets, and other relevant literature

respecting any materials or equipment mentioned

herein. These standards are subject to change without

notice.

By publication of this standard, SEMI takes no position

respecting the validity of any patent rights or copyrights

asserted in connection with any item mentioned in this

standard. Users of this standard are expressly advised

that determination of any such patent rights or

copyrights, and the risk of infringement of such rights,

are entirely their own responsibility.

International), 3081 Zanker Road, San Jose, CA 95134. Reproduction of

the contents in whole or in part is forbidden without express written

consent of SEMI.