semi合集-English.pdf - 第2589页

SEMI E90.1-0705 © SEMI 2001, 2005 1 SEMI E90.1-0705 PROVISIONAL SPECIFICATIO N FOR SECS-II PROTOCOL SUBSTRATE TRACKING This specificatio n was technically approved by the gl obal Information & Contr ol Committee. Thi…

100%1 / 7923
SEMI E90-0705 © SEMI 1999, 2005 28
NOTICE: SEMI makes no warranties or representations as to the suitability of the standards set forth herein for any
particular application. The determination of the suitability of the standard is solely the responsibility of the user.
Users are cautioned to refer to manufacturer's instructions, product labels, product data sheets, and other relevant
literature, respecting any materials or equipment mentioned herein. These standards are subject to change without
notice.
By publication of this standard, Semiconductor Equipment and Materials International (SEMI) takes no position
respecting the validity of any patent rights or copyrights asserted in connection with any items mentioned in this
standard. Users of this standard are expressly advised that determination of any such patent rights or copyrights, and
the risk of infringement of such rights are entirely their own responsibility.
Copyright by SEMI® (Semiconductor Equipment and Materials
International), 3081 Zanker Road, San Jose, CA 95134. Reproduction of
the contents in whole or in part is forbidden without express written
consent of SEMI.
SEMI E90.1-0705 © SEMI 2001, 2005 1
SEMI E90.1-0705
PROVISIONAL SPECIFICATION FOR SECS-II PROTOCOL
SUBSTRATE TRACKING
This specification was technically approved by the global Information & Control Committee. This edition
was approved for publication by the global Audits and Reviews Subcommittee on April 7, 2005. It was
available at www.semi.org in June 2005 and on CD-ROM in July 2005. Originally published March 2001;
previously published July 2003.
1 Purpose
1.1 This document maps the services and data of SEMI E90 to SECS-II streams and functions, and data definitions.
2 Scope
2.1 This is a specification covering equipment supporting automated substrate tracking.
2.2 This document applies to all implementations of SEMI E90 that use the SECS-II message protocol (SEMI E5).
Compliance to this standard requires compliance to both SEMI E90 and SEMI E5.
2.3 This standard does not purport to address safety issues, if any, associated with its use. It is the responsibility of
the users of this standard to establish appropriate safety and health practices and determine the applicability of
regulatory limitations prior to use.
2.4 This standard is provisional. To have the provisional status removed, the following must be completed:
Table 1, Services Message Mapping Table
Table 3, Services Parameters to SECS-II Data Items Mapping
NOTICE: This standard does not purport to address safety issues, if any, associated with its use. It is the
responsibility of the users of this standard to establish appropriate safety and health practices and determine the
applicability of regulatory or other limitations prior to use.
3 Referenced Standards and Documents
3.1 SEMI Standards
SEMI E5 — SEMI Equipment Communications Standard 2 Message Content (SECS-II)
SEMI E30 — Generic Model for Communications and Control of Manufacturing Equipment (GEM)
SEMI E39.1 — SECS-II Protocol for Object Services Standard (OSS)
SEMI E53 — Event Reporting
NOTICE: Unless otherwise indicated, all documents cited shall be the latest published versions.
4 Mapping
4.1 This section shows the specific SECS-II streams and functions that shall be used for SECS-II implementation of
the services defined in SEMI E90, as well as the parameter mapping for data attached to services.
4.2 Message Mapping
4.2.1 Services Message Mapping — Table 1 defines the relationships between SEMI E90 services and SECS-II
messages.
4.2.2 Event Message Mapping — Table 2 defines the relationships between SEMI E90 collection events and SECS-
II messages.
SEMI E90.1-0705 © SEMI 2001, 2005 2
Table 1 Services Message Mapping Table
Service Name Stream, Function SECS-II Message Name
change substrate state (not yet defined) (not yet defined)
register substrate S14,F9/10 Create Object Request/Acknowledge (SEMI E39.1)
remove substrate S14,F11/12 Delete Object Request/Acknowledge (SEMI E39.1)
UpdateSubstrateObject S14F19/F20 Generic Service Request/Acknowledge
ProceedWithSubstrate S14F19/F20 Generic Service Request/Acknowledge
CancelSubstrate S14F19/F20 Generic Service Request/Acknowledge
Table 2 Event Message Mapping Table
Event Name Stream, Function SECS-II Message Name
All state model
transitions
If SEMI E30 style events:
S6F11/12
If SEMI E53 style events:
S6F11/12
S6F13/14
If SEMI E30 style events:
Event Report Send/Acknowledge
If SEMI E53 style events:
Event Report Send/Acknowledge
Annotated Event Report Send/Ack
4.3 Parameter Mapping — Table 3 defines the relationships between SEMI E90 service parameters and SECS-II
data definitions.
Table 3 Service Parameters to SECS-II Data Items Mapping
Parameter Name Range SECS-II Data Item
ErrorCode Enumerated. ERRCODE
ErrorText 1 to 80 characters. ERRTEXT
ObjectAction “UpdateSubstrateObject”. SVCNAME
ObjectActionStatus List of service acknowledge and status. L,2
1. SVCACK
2. Status
ObjectAction-
ParameterResult
(List of) name value pairs providing information about
the attributes successfully set.
L,n
1. L,2
1. SPNAME
1
2. SPVAL
1
:
n. L,2
1. SPNAME
n
2. SPVAL
n
ObjectLinkID 51. LINKID
OperationID 51. OPID
STAcknowledge 0 if success; 1 if error
(Conforms to ObjAck in SEMI E39.1)
OBJACK
Status List of error information. L,n n = number of errors
1. L,2
1. <ErrorCode
1
>
2. <ErrorText
1
>
.
.
n. L,2
1. <ErrorCode
n
>
2. <ErrorText
n
>