semi合集-English.pdf - 第6827页

SEMI S2-0703a E © SEMI 1991, 2004 56 Japanese Standards Title JIS C 0602 General Rules of Color Id entification for Protective Conductor and Neutral Condu ctor JIS C 4610 Circuit breakers for equipment JIS B 6015 Electri…

100%1 / 7923
SEMI S2-0703a
E
© SEMI 1991, 2004 55
OSHA 29 CFR 1910.332-335 Safety Related Work Practices [electrical]
1997 Uniform Building Code,
Section 1632
Structural Design Requirements -- Earthquake Design -- Lateral Force on Elements of
Structures, Nonstructural Components and Equipment Supported by Structures
UL73 Motor Operated Appliances
UL471 Commercial Refrigerators and Freezers
UL698 Industrial Control Equipment for use in Hazardous Locations
UL1450 Motor-Operated Air Compressors, Vacuum Pumps and Painting Equipment
UL1740 Robots and Robotic Equipment
UL1995 Heating and Cooling Equipment
UL2011 Factory Automation Equipment
UL3111-1 Electrical Measuring and Test Equipment
UL3121-1 Process Control Equipment
Canadian Standards Title
CAN/CSA C22.1 Canadian Electrical Code, Part I
CAN/CSA C22.2 No. 0 General Requirements - Canadian Electrical Code, Part II
CAN/CSA C22.2 No. 107.1 Commercial and Industrial Power Supplies
CAN/CSA C22.2 No. 234 Safety of Component Power Supplies
CAN/CSA C22.2 No. 950 Safety of Information Technology Equipment, including Electrical Business Equipment
CAN/CSA C22.2 No. 1010 Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory
Use
European Standards Title
EN 292-1 Safety of Machinery - Basic terminology and Technical principles
EN 292-2 Safety of Machinery - Technical Principles and Specifications
EN 294 Safety of Machinery - Safety distance to prevent danger zones being reached by upper
limbs
EN 418 Functional Aspects of Machinery Emergency Stop Equipment
EN 626-2 Elimination or reduction of risk to health from hazardous substances emitted by
machinery - Part 2: Methodology leading to verification procedures
EN 811 Safety of Machinery - Safety distance to prevent zones being reached by lower limbs
EN 953 Safety of machinery - guards - general requirements for the design and construction of
fixed and moving guards
EN 954-1 Safety of machinery - safety-related parts of control systems, Part 1: General principle for
design.
EN 1037 Safety of machinery - Prevention of unexpected start-up
EN 1088 Safety of Machinery - Interlocking devices with and without guard locking
EN 1093-1 Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test
methods
EN 1093-9 Evaluation of the emission of airborne hazardous substances - Part 9: Pollutant
concentration parameter - Room Method
EN 50178 Electronic equipment for use in power installations
EN 60204-1 Safety of Machinery - Electrical equipment of machines, Part 1
EN 60529 Degree of Protection Provided by Enclosure (IP Codes)
EN 60825-1 Safety of Laser Products, Part 1: Equipment Classification, Requirements and User’s
Guide
EN 60950 Specifications for Safety of Information Technology Equipment, including Electrical
Business Equipment
EN 61010-1 Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory
SEMI S2-0703a
E
© SEMI 1991, 2004 56
Japanese Standards Title
JIS C 0602 General Rules of Color Identification for Protective Conductor and Neutral Conductor
JIS C 4610 Circuit breakers for equipment
JIS B 6015 Electrical Equipment of Machine Tools
JIS C 8371 Residual current operated circuit breakers
SEMI S2-0703a
E
© SEMI 1991, 2004 57
RELATED INFORMATION 3
HAZARD LABELS
NOTICE: This related information is not an official part of SEMI S2 and was derived from practical application by
task force members. This related information was approved for publication by vote of the responsible committee on
October 21, 1999.
R3-1 INTRODUCTION: The system shown below is a single label design that combines requirements from ANSI
Z535, used in the USA, and ISO 3864 and IEC 1310-1, used elsewhere in the world. The suitability of this design
for any specific jurisdiction must be determined by the equipment manufacturer.
(IEC/ISO SECTION) (ANSI SECTION)
White background Signal Word Panel †
Orange background† (All capitalized min. letter height
Black border 1.5 times the message panel
0.06 x Base width Safety alert symbol‡ text height)
Part number
Yellow background Black lettering on white
Base width background (san serif, upper or lower case,
min. 30 mm Black border around min. 0.10 inch or 2.54 mm high) (See NOTE 1.)
IEC section optional
(sized to fit Pictorial Panel) Message Panel - Identifies hazard, how to
avoid hazard and probable consequence of
not avoiding hazard
Figure R3-1
Example of a Combination ANSI/IEC Hazard Label Format
†SIGNAL WORD (san serif font) ‡SAFETY ALERT SYMBOL
DANGER - White Lettering / Red Background
(Safety Red: per ANSI Z535.4 - 15 parts Warm Red, 1 part Rubine Red,
1/4 part Black)
White Triangle / Red Exclamation Point
WARNING - Black Lettering / Orange Background
(Safety Orange: per ANSI Z535.4 - 13 parts Yellow, 3 parts Warm Red,
1/4 part Black)
Black Triangle / Orange Exclamation
Point
CAUTION - Black Lettering / Yellow Background
(Safety Yellow: per ANSI Z535.4 - Pantone 108C)
Black Triangle / Yellow Exclamation
Point
NOTE 1: Message Panel Letter height (min. 0.10 inch or 2.54 mm high) for FAVORABLE reading conditions may, in some instances be reduced
further for application to small products or products having limited surface area on which to apply the message. However, it should not be less
than 0.05 in. (1.27 mm) for lower case letter height.
NOTE 2: Upon request from end-user(s), translation(s) to other languages may also be deemed appropriate.