semi合集-English.pdf - 第2135页
SEMI E54.15-0305 © SEMI 2005 7 Services ID Service Name CDM Tag 01 Reset DmS1 03 Abort DmS2 05 Recover DmS3 07 Get Attribute DmS4 09 Set Attribute DmS5 11 Execute DmS6 13 Perform Diagnostics DmS7 15 Publish Attribute DmS…
SEMI E54.15-0305 © SEMI 2005 6
7.1.5 In the following sections the presentation to the network of object addressing, object attributes and object
services for each of the object types listed in Table 2 is described in detail. Refer to the CDM standard to determine
if the object instance attribute and service is specified as required or optional. Unless otherwise noted, all attributes
and services described are instance level attributes (as opposed to class level attributes). A class level attribute and
service is accessed as instance number zero.
7.1.6 Note that the formats of object attributes and services are detailed in the CDM document; the presentation of
object attributes and services to the SafetyBUS p network is detailed in the tables contained in the following sub-
sections and in the SafetyBUS p standard specifications.
7.2 Device Manager (DM) Object –– The DM object instance is the device component responsible for managing
and consolidating the device operation. Each device must support one (and only one) DM object. The DM object as
well as its common required and optional attributes, services and behavior are described in the CDM standard. The
presentation of object instance attributes and services to the SafetyBUS p network shall be as indicated in Table 3.
Note that all service ID values identified refer to the ID of the request or notification component of that service.
Corresponding reply components to request/reply services shall have a service ID value equal to the request
component ID plus one.
Table 3 DM Object Instance Attributes and Services
Device Manager Object (DM)
Class ID = 01, Instance ID = 01
Attributes
ID Attribute Name CDM Tag
01 Device Type DmA1
02 Standard Revision Level DmA2
03 Device Manufacturer Identifier DmA3
04 Manufacturer Model Number DmA4
05 Software or Firmware Revision Level DmA5
06 Hardware Revision Level DmA6
07 Serial Number DmA7
08 Device Configuration DmA8
09 Device Status DmA9
10 Reporting Mode DmA10
11 Exception Status Report DmA11
12 Exception Status DmA12
13 Exception Detail Alarm DmA13
14 Exception Detail Warning DmA14
15 Visual Indicator DmA15
16 Alarm Enable DmA16
17 Warning Enable DmA17
18 Exception Detail Type DmA18
19 Exception Detail Alarm Queue DmA19
20 Exception Detail Warning Queue DmA20
21 Date and Time DmA21
22 Date and Time Type DmA22
SEMI E54.15-0305 © SEMI 2005 7
Services
ID Service Name CDM Tag
01 Reset DmS1
03 Abort DmS2
05 Recover DmS3
07 Get Attribute DmS4
09 Set Attribute DmS5
11 Execute DmS6
13 Perform Diagnostics DmS7
15 Publish Attribute DmS8
17 Lock DmS9
19 Unlock DmS10
21 Get Exception Queue DmS11
23 Clear Exception Queue DmS12
7.3 Sensor, Actuator, Controller (SAC) Object –– The SAC object instance is the device component responsible for
coordinating the interaction of the device with the sensory/actuation/control environment. Each device must support
one (and only one) SAC object instance. The SAC object instance as well as its common required and optional
attributes, services and behavior are described in the CDM standard. The presentation of object instance attributes
and services to the SafetyBUS p network shall be as indicated in Table 4.
Table 4 Object Instance Attributes and Services
Sensor, Actuator, Controller Object (SAC)
Class ID = 02, Instance ID = 01
Attributes
ID Attribute Name CDM Tag
01 Last Calibration Date SacA1
02 Next Calibration Date SacA2
03 Expiration Timer SacA3
04 Expiration Warning Enable SacA4
05 Run Hours SacA5
Services
ID Service Name CDM Tag
01 Reset SacS1
03 Abort SacS2
05 Recover SacS3
07 Get Attribute SacS4
09 Set Attribute SacS5
25 Operate SacS6
27 Restore Default SacS7
29 Publish Attribute SacS8
SEMI E54.15-0305 © SEMI 2005 8
7.4 Assembly Object (Asm) –– The Assembly (Asm) object instances may be used to provide for grouping more
than one attribute from one or more object instances in a device into a single data structure for communication over
the SafetyBUS p Network. The presentation of object instance attributes and services shall be as indicated in Table
5.
Table 5 Assembly Object Instance Attributes and Services
ASSEMBLY Object (Asm)
Class ID = 03, Instance ID = 01 through i
Attributes
ID Attribute Name CDM Tag
01 Data AsmA1
Services
ID Service Name CDM Tag
07 Get Attribute AsmS4
09 Set Attribute AsmS5
7.5 Local Link Object (Lnk) –– The Local Link (Lnk) object instances may be used to ‘link” an attribute of one
object instance to an attribute of another object instance. Refer to the CDM for further explanation and use of this
object. The presentation of object instance attributes and services are as indicated in Table 6.
Table 6 Local Link Object Instance Attributes and Services
Local Link Object (Lnk)
Class ID = 04, Instance ID = 01 through j
Attributes
ID Attribute Name CDM Tag
01 Source Object Class LnkA1
02 Source Object Instance LnkA2
03 Source Object Attribute LnkA3
04 Destination Object Class LnkA4
05 Destination Object Instance LnkA5
06 Destination Object Attribute LnkA6
07 Commit LnkA7
Services
ID Service Name CDM Tag
-- No services defined --