semi合集-English.pdf - 第6549页

SEMI G83-0301 © SE MI 2001 5 Figure A1-2 AIM USS-1 28

100%1 / 7923
SEMI G83-0301 © SEMI 2001 4
APPENDIX 1
NOTE: The material in this appendix is an official part of SEMI G83 and was approved by full letter ballot procedures on
December 1, 2000 by the Japanese Regional Standards Committee.
This information explains AIM Specifications listed in Section 3.1 and examples of Data Contents specified in Table 3.
A1-1 AIM USS-39
A1-1.1 Figure A1-1 shows the AIM USS-39 characters and bar patterns.
Figure A1-1
AIM USS-39
A1-2 AIM USS-128
A1-2.1 The AIM USS-128 characters and bar patterns are shown in Figure A1-2. Areas enclosed by bold lines
indicate the code used with this specification.
SEMI G83-0301 © SEMI 20015
Figure A1-2
AIM USS-128
SEMI G83-0301 © SEMI 2001 6
A1-3 Example of Data Contents
A1-3.1 The items shown in Figures A1-3 and A1-4 are
data contents of bar code that comply with this
specification.
Manufacturing
Date
Sub-Lot No.
Product
Recognition
No.
Hexadecimal:
#109
Lot No.
November 20, 1999
ZDR11N9BK6 TX024
Figure A1-3
Example of Data Contents
Manufacturing
Date
Sub-Lot No.
Product
Recognition
N
o.
unused
Lot No.
N
ovember, 1999
Z-R11N9B-- TX024
( Date unused )
Figure A1-4
Example of Data Contents
NOTICE: SEMI makes no warranties or representa-
tions as to the suitability of the standard set forth herein
for any particular application. The determination of the
suitability of the standard is solely the responsibility of
the user. Users are cautioned to refer to manufacturer’s
instructions, product labels, product data sheets, and
other relevant literature respecting any materials or
equipment mentioned herein. These standards are
subject to change without notice.
The user’s attention is called to the possibility that
compliance with this standard may require use of
copyrighted material or of an invention covered by
patent rights. By publication of this standard, SEMI
takes no position respecting the validity of any patent
rights or copyrights asserted in connection with any
item mentioned in this standard. Users of this standard
are expressly advised that determination of any such
patent rights or copyrights, and the risk of infringement
of such rights, are entirely their own responsibility.
Copyright by SEMI® (Semiconductor Equipment and Materials
International), 3081 Zanker Road, San Jose, CA 95134. Reproduction o
f
the contents in whole or in part is forbidden without express written
consent of SEMI.